// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[allow(missing_docs)] // documentation missing in model
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::fmt::Debug)]
pub struct ModifyVolumeInput {
/// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
pub dry_run: ::std::option::Option<bool>,
/// <p>The ID of the volume.</p>
pub volume_id: ::std::option::Option<::std::string::String>,
/// <p>The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume.</p>
/// <p>The following are the supported volumes sizes for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp2</code>: 1 - 16,384 GiB</p></li>
/// <li>
/// <p><code>gp3</code>: 1 - 65,536 GiB</p></li>
/// <li>
/// <p><code>io1</code>: 4 - 16,384 GiB</p></li>
/// <li>
/// <p><code>io2</code>: 4 - 65,536 GiB</p></li>
/// <li>
/// <p><code>st1</code> and <code>sc1</code>: 125 - 16,384 GiB</p></li>
/// <li>
/// <p><code>standard</code>: 1 - 1024 GiB</p></li>
/// </ul>
/// <p>Default: The existing size is retained.</p>
pub size: ::std::option::Option<i32>,
/// <p>The target EBS volume type of the volume. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volume-types.html">Amazon EBS volume types</a> in the <i>Amazon EBS User Guide</i>.</p>
/// <p>Default: The existing type is retained.</p>
pub volume_type: ::std::option::Option<crate::types::VolumeType>,
/// <p>The target IOPS rate of the volume. This parameter is valid only for <code>gp3</code>, <code>io1</code>, and <code>io2</code> volumes.</p>
/// <p>The following are the supported values for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp3</code>: 3,000 - 80,000 IOPS</p></li>
/// <li>
/// <p><code>io1</code>: 100 - 64,000 IOPS</p></li>
/// <li>
/// <p><code>io2</code>: 100 - 256,000 IOPS</p></li>
/// </ul><note>
/// <p><a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Instances built on the Nitro System</a> can support up to 256,000 IOPS. Other instances can support up to 32,000 IOPS.</p>
/// </note>
/// <p>Default: The existing value is retained if you keep the same volume type. If you change the volume type to <code>io1</code>, <code>io2</code>, or <code>gp3</code>, the default is 3,000.</p>
pub iops: ::std::option::Option<i32>,
/// <p>The target throughput of the volume, in MiB/s. This parameter is valid only for <code>gp3</code> volumes. The maximum value is 2,000.</p>
/// <p>Default: The existing value is retained if the source and target volume type is <code>gp3</code>. Otherwise, the default value is 125.</p>
/// <p>Valid Range: Minimum value of 125. Maximum value of 2,000.</p>
pub throughput: ::std::option::Option<i32>,
/// <p>Specifies whether to enable Amazon EBS Multi-Attach. If you enable Multi-Attach, you can attach the volume to up to 16 <a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Nitro-based instances</a> in the same Availability Zone. This parameter is supported with <code>io1</code> and <code>io2</code> volumes only. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volumes-multi.html"> Amazon EBS Multi-Attach</a> in the <i>Amazon EBS User Guide</i>.</p>
pub multi_attach_enabled: ::std::option::Option<bool>,
}
impl ModifyVolumeInput {
/// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
pub fn dry_run(&self) -> ::std::option::Option<bool> {
self.dry_run
}
/// <p>The ID of the volume.</p>
pub fn volume_id(&self) -> ::std::option::Option<&str> {
self.volume_id.as_deref()
}
/// <p>The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume.</p>
/// <p>The following are the supported volumes sizes for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp2</code>: 1 - 16,384 GiB</p></li>
/// <li>
/// <p><code>gp3</code>: 1 - 65,536 GiB</p></li>
/// <li>
/// <p><code>io1</code>: 4 - 16,384 GiB</p></li>
/// <li>
/// <p><code>io2</code>: 4 - 65,536 GiB</p></li>
/// <li>
/// <p><code>st1</code> and <code>sc1</code>: 125 - 16,384 GiB</p></li>
/// <li>
/// <p><code>standard</code>: 1 - 1024 GiB</p></li>
/// </ul>
/// <p>Default: The existing size is retained.</p>
pub fn size(&self) -> ::std::option::Option<i32> {
self.size
}
/// <p>The target EBS volume type of the volume. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volume-types.html">Amazon EBS volume types</a> in the <i>Amazon EBS User Guide</i>.</p>
/// <p>Default: The existing type is retained.</p>
pub fn volume_type(&self) -> ::std::option::Option<&crate::types::VolumeType> {
self.volume_type.as_ref()
}
/// <p>The target IOPS rate of the volume. This parameter is valid only for <code>gp3</code>, <code>io1</code>, and <code>io2</code> volumes.</p>
/// <p>The following are the supported values for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp3</code>: 3,000 - 80,000 IOPS</p></li>
/// <li>
/// <p><code>io1</code>: 100 - 64,000 IOPS</p></li>
/// <li>
/// <p><code>io2</code>: 100 - 256,000 IOPS</p></li>
/// </ul><note>
/// <p><a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Instances built on the Nitro System</a> can support up to 256,000 IOPS. Other instances can support up to 32,000 IOPS.</p>
/// </note>
/// <p>Default: The existing value is retained if you keep the same volume type. If you change the volume type to <code>io1</code>, <code>io2</code>, or <code>gp3</code>, the default is 3,000.</p>
pub fn iops(&self) -> ::std::option::Option<i32> {
self.iops
}
/// <p>The target throughput of the volume, in MiB/s. This parameter is valid only for <code>gp3</code> volumes. The maximum value is 2,000.</p>
/// <p>Default: The existing value is retained if the source and target volume type is <code>gp3</code>. Otherwise, the default value is 125.</p>
/// <p>Valid Range: Minimum value of 125. Maximum value of 2,000.</p>
pub fn throughput(&self) -> ::std::option::Option<i32> {
self.throughput
}
/// <p>Specifies whether to enable Amazon EBS Multi-Attach. If you enable Multi-Attach, you can attach the volume to up to 16 <a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Nitro-based instances</a> in the same Availability Zone. This parameter is supported with <code>io1</code> and <code>io2</code> volumes only. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volumes-multi.html"> Amazon EBS Multi-Attach</a> in the <i>Amazon EBS User Guide</i>.</p>
pub fn multi_attach_enabled(&self) -> ::std::option::Option<bool> {
self.multi_attach_enabled
}
}
impl ModifyVolumeInput {
/// Creates a new builder-style object to manufacture [`ModifyVolumeInput`](crate::operation::modify_volume::ModifyVolumeInput).
pub fn builder() -> crate::operation::modify_volume::builders::ModifyVolumeInputBuilder {
crate::operation::modify_volume::builders::ModifyVolumeInputBuilder::default()
}
}
/// A builder for [`ModifyVolumeInput`](crate::operation::modify_volume::ModifyVolumeInput).
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default, ::std::fmt::Debug)]
#[non_exhaustive]
pub struct ModifyVolumeInputBuilder {
pub(crate) dry_run: ::std::option::Option<bool>,
pub(crate) volume_id: ::std::option::Option<::std::string::String>,
pub(crate) size: ::std::option::Option<i32>,
pub(crate) volume_type: ::std::option::Option<crate::types::VolumeType>,
pub(crate) iops: ::std::option::Option<i32>,
pub(crate) throughput: ::std::option::Option<i32>,
pub(crate) multi_attach_enabled: ::std::option::Option<bool>,
}
impl ModifyVolumeInputBuilder {
/// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
pub fn dry_run(mut self, input: bool) -> Self {
self.dry_run = ::std::option::Option::Some(input);
self
}
/// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
pub fn set_dry_run(mut self, input: ::std::option::Option<bool>) -> Self {
self.dry_run = input;
self
}
/// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
pub fn get_dry_run(&self) -> &::std::option::Option<bool> {
&self.dry_run
}
/// <p>The ID of the volume.</p>
/// This field is required.
pub fn volume_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.volume_id = ::std::option::Option::Some(input.into());
self
}
/// <p>The ID of the volume.</p>
pub fn set_volume_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.volume_id = input;
self
}
/// <p>The ID of the volume.</p>
pub fn get_volume_id(&self) -> &::std::option::Option<::std::string::String> {
&self.volume_id
}
/// <p>The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume.</p>
/// <p>The following are the supported volumes sizes for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp2</code>: 1 - 16,384 GiB</p></li>
/// <li>
/// <p><code>gp3</code>: 1 - 65,536 GiB</p></li>
/// <li>
/// <p><code>io1</code>: 4 - 16,384 GiB</p></li>
/// <li>
/// <p><code>io2</code>: 4 - 65,536 GiB</p></li>
/// <li>
/// <p><code>st1</code> and <code>sc1</code>: 125 - 16,384 GiB</p></li>
/// <li>
/// <p><code>standard</code>: 1 - 1024 GiB</p></li>
/// </ul>
/// <p>Default: The existing size is retained.</p>
pub fn size(mut self, input: i32) -> Self {
self.size = ::std::option::Option::Some(input);
self
}
/// <p>The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume.</p>
/// <p>The following are the supported volumes sizes for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp2</code>: 1 - 16,384 GiB</p></li>
/// <li>
/// <p><code>gp3</code>: 1 - 65,536 GiB</p></li>
/// <li>
/// <p><code>io1</code>: 4 - 16,384 GiB</p></li>
/// <li>
/// <p><code>io2</code>: 4 - 65,536 GiB</p></li>
/// <li>
/// <p><code>st1</code> and <code>sc1</code>: 125 - 16,384 GiB</p></li>
/// <li>
/// <p><code>standard</code>: 1 - 1024 GiB</p></li>
/// </ul>
/// <p>Default: The existing size is retained.</p>
pub fn set_size(mut self, input: ::std::option::Option<i32>) -> Self {
self.size = input;
self
}
/// <p>The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume.</p>
/// <p>The following are the supported volumes sizes for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp2</code>: 1 - 16,384 GiB</p></li>
/// <li>
/// <p><code>gp3</code>: 1 - 65,536 GiB</p></li>
/// <li>
/// <p><code>io1</code>: 4 - 16,384 GiB</p></li>
/// <li>
/// <p><code>io2</code>: 4 - 65,536 GiB</p></li>
/// <li>
/// <p><code>st1</code> and <code>sc1</code>: 125 - 16,384 GiB</p></li>
/// <li>
/// <p><code>standard</code>: 1 - 1024 GiB</p></li>
/// </ul>
/// <p>Default: The existing size is retained.</p>
pub fn get_size(&self) -> &::std::option::Option<i32> {
&self.size
}
/// <p>The target EBS volume type of the volume. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volume-types.html">Amazon EBS volume types</a> in the <i>Amazon EBS User Guide</i>.</p>
/// <p>Default: The existing type is retained.</p>
pub fn volume_type(mut self, input: crate::types::VolumeType) -> Self {
self.volume_type = ::std::option::Option::Some(input);
self
}
/// <p>The target EBS volume type of the volume. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volume-types.html">Amazon EBS volume types</a> in the <i>Amazon EBS User Guide</i>.</p>
/// <p>Default: The existing type is retained.</p>
pub fn set_volume_type(mut self, input: ::std::option::Option<crate::types::VolumeType>) -> Self {
self.volume_type = input;
self
}
/// <p>The target EBS volume type of the volume. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volume-types.html">Amazon EBS volume types</a> in the <i>Amazon EBS User Guide</i>.</p>
/// <p>Default: The existing type is retained.</p>
pub fn get_volume_type(&self) -> &::std::option::Option<crate::types::VolumeType> {
&self.volume_type
}
/// <p>The target IOPS rate of the volume. This parameter is valid only for <code>gp3</code>, <code>io1</code>, and <code>io2</code> volumes.</p>
/// <p>The following are the supported values for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp3</code>: 3,000 - 80,000 IOPS</p></li>
/// <li>
/// <p><code>io1</code>: 100 - 64,000 IOPS</p></li>
/// <li>
/// <p><code>io2</code>: 100 - 256,000 IOPS</p></li>
/// </ul><note>
/// <p><a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Instances built on the Nitro System</a> can support up to 256,000 IOPS. Other instances can support up to 32,000 IOPS.</p>
/// </note>
/// <p>Default: The existing value is retained if you keep the same volume type. If you change the volume type to <code>io1</code>, <code>io2</code>, or <code>gp3</code>, the default is 3,000.</p>
pub fn iops(mut self, input: i32) -> Self {
self.iops = ::std::option::Option::Some(input);
self
}
/// <p>The target IOPS rate of the volume. This parameter is valid only for <code>gp3</code>, <code>io1</code>, and <code>io2</code> volumes.</p>
/// <p>The following are the supported values for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp3</code>: 3,000 - 80,000 IOPS</p></li>
/// <li>
/// <p><code>io1</code>: 100 - 64,000 IOPS</p></li>
/// <li>
/// <p><code>io2</code>: 100 - 256,000 IOPS</p></li>
/// </ul><note>
/// <p><a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Instances built on the Nitro System</a> can support up to 256,000 IOPS. Other instances can support up to 32,000 IOPS.</p>
/// </note>
/// <p>Default: The existing value is retained if you keep the same volume type. If you change the volume type to <code>io1</code>, <code>io2</code>, or <code>gp3</code>, the default is 3,000.</p>
pub fn set_iops(mut self, input: ::std::option::Option<i32>) -> Self {
self.iops = input;
self
}
/// <p>The target IOPS rate of the volume. This parameter is valid only for <code>gp3</code>, <code>io1</code>, and <code>io2</code> volumes.</p>
/// <p>The following are the supported values for each volume type:</p>
/// <ul>
/// <li>
/// <p><code>gp3</code>: 3,000 - 80,000 IOPS</p></li>
/// <li>
/// <p><code>io1</code>: 100 - 64,000 IOPS</p></li>
/// <li>
/// <p><code>io2</code>: 100 - 256,000 IOPS</p></li>
/// </ul><note>
/// <p><a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Instances built on the Nitro System</a> can support up to 256,000 IOPS. Other instances can support up to 32,000 IOPS.</p>
/// </note>
/// <p>Default: The existing value is retained if you keep the same volume type. If you change the volume type to <code>io1</code>, <code>io2</code>, or <code>gp3</code>, the default is 3,000.</p>
pub fn get_iops(&self) -> &::std::option::Option<i32> {
&self.iops
}
/// <p>The target throughput of the volume, in MiB/s. This parameter is valid only for <code>gp3</code> volumes. The maximum value is 2,000.</p>
/// <p>Default: The existing value is retained if the source and target volume type is <code>gp3</code>. Otherwise, the default value is 125.</p>
/// <p>Valid Range: Minimum value of 125. Maximum value of 2,000.</p>
pub fn throughput(mut self, input: i32) -> Self {
self.throughput = ::std::option::Option::Some(input);
self
}
/// <p>The target throughput of the volume, in MiB/s. This parameter is valid only for <code>gp3</code> volumes. The maximum value is 2,000.</p>
/// <p>Default: The existing value is retained if the source and target volume type is <code>gp3</code>. Otherwise, the default value is 125.</p>
/// <p>Valid Range: Minimum value of 125. Maximum value of 2,000.</p>
pub fn set_throughput(mut self, input: ::std::option::Option<i32>) -> Self {
self.throughput = input;
self
}
/// <p>The target throughput of the volume, in MiB/s. This parameter is valid only for <code>gp3</code> volumes. The maximum value is 2,000.</p>
/// <p>Default: The existing value is retained if the source and target volume type is <code>gp3</code>. Otherwise, the default value is 125.</p>
/// <p>Valid Range: Minimum value of 125. Maximum value of 2,000.</p>
pub fn get_throughput(&self) -> &::std::option::Option<i32> {
&self.throughput
}
/// <p>Specifies whether to enable Amazon EBS Multi-Attach. If you enable Multi-Attach, you can attach the volume to up to 16 <a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Nitro-based instances</a> in the same Availability Zone. This parameter is supported with <code>io1</code> and <code>io2</code> volumes only. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volumes-multi.html"> Amazon EBS Multi-Attach</a> in the <i>Amazon EBS User Guide</i>.</p>
pub fn multi_attach_enabled(mut self, input: bool) -> Self {
self.multi_attach_enabled = ::std::option::Option::Some(input);
self
}
/// <p>Specifies whether to enable Amazon EBS Multi-Attach. If you enable Multi-Attach, you can attach the volume to up to 16 <a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Nitro-based instances</a> in the same Availability Zone. This parameter is supported with <code>io1</code> and <code>io2</code> volumes only. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volumes-multi.html"> Amazon EBS Multi-Attach</a> in the <i>Amazon EBS User Guide</i>.</p>
pub fn set_multi_attach_enabled(mut self, input: ::std::option::Option<bool>) -> Self {
self.multi_attach_enabled = input;
self
}
/// <p>Specifies whether to enable Amazon EBS Multi-Attach. If you enable Multi-Attach, you can attach the volume to up to 16 <a href="https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html"> Nitro-based instances</a> in the same Availability Zone. This parameter is supported with <code>io1</code> and <code>io2</code> volumes only. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volumes-multi.html"> Amazon EBS Multi-Attach</a> in the <i>Amazon EBS User Guide</i>.</p>
pub fn get_multi_attach_enabled(&self) -> &::std::option::Option<bool> {
&self.multi_attach_enabled
}
/// Consumes the builder and constructs a [`ModifyVolumeInput`](crate::operation::modify_volume::ModifyVolumeInput).
pub fn build(
self,
) -> ::std::result::Result<crate::operation::modify_volume::ModifyVolumeInput, ::aws_smithy_types::error::operation::BuildError> {
::std::result::Result::Ok(crate::operation::modify_volume::ModifyVolumeInput {
dry_run: self.dry_run,
volume_id: self.volume_id,
size: self.size,
volume_type: self.volume_type,
iops: self.iops,
throughput: self.throughput,
multi_attach_enabled: self.multi_attach_enabled,
})
}
}