// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::authorize_security_group_ingress::_authorize_security_group_ingress_input::AuthorizeSecurityGroupIngressInputBuilder;
pub use crate::operation::authorize_security_group_ingress::_authorize_security_group_ingress_output::AuthorizeSecurityGroupIngressOutputBuilder;
impl crate::operation::authorize_security_group_ingress::builders::AuthorizeSecurityGroupIngressInputBuilder {
/// Sends a request with this input using the given client.
pub async fn send_with(
self,
client: &crate::Client,
) -> ::std::result::Result<
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let mut fluent_builder = client.authorize_security_group_ingress();
fluent_builder.inner = self;
fluent_builder.send().await
}
}
/// Fluent builder constructing a request to `AuthorizeSecurityGroupIngress`.
///
/// <p>Adds the specified inbound (ingress) rules to a security group.</p>
/// <p>An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 address range, the IP address ranges that are specified by a prefix list, or the instances that are associated with a destination security group. For more information, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/security-group-rules.html">Security group rules</a>.</p>
/// <p>You must specify exactly one of the following sources: an IPv4 or IPv6 address range, a prefix list, or a security group. You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP/ICMPv6 type and code.</p>
/// <p>Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.</p>
/// <p>For examples of rules that you can add to security groups for specific access scenarios, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/security-group-rules-reference.html">Security group rules for different use cases</a> in the <i>Amazon EC2 User Guide</i>.</p>
/// <p>For more information about security group quotas, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/amazon-vpc-limits.html">Amazon VPC quotas</a> in the <i>Amazon VPC User Guide</i>.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct AuthorizeSecurityGroupIngressFluentBuilder {
handle: ::std::sync::Arc<crate::client::Handle>,
inner: crate::operation::authorize_security_group_ingress::builders::AuthorizeSecurityGroupIngressInputBuilder,
config_override: ::std::option::Option<crate::config::Builder>,
}
impl
crate::client::customize::internal::CustomizableSend<
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressOutput,
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressError,
> for AuthorizeSecurityGroupIngressFluentBuilder
{
fn send(
self,
config_override: crate::config::Builder,
) -> crate::client::customize::internal::BoxFuture<
crate::client::customize::internal::SendResult<
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressOutput,
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressError,
>,
> {
::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
}
}
impl AuthorizeSecurityGroupIngressFluentBuilder {
/// Creates a new `AuthorizeSecurityGroupIngressFluentBuilder`.
pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
Self {
handle,
inner: ::std::default::Default::default(),
config_override: ::std::option::Option::None,
}
}
/// Access the AuthorizeSecurityGroupIngress as a reference.
pub fn as_input(&self) -> &crate::operation::authorize_security_group_ingress::builders::AuthorizeSecurityGroupIngressInputBuilder {
&self.inner
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> ::std::result::Result<
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let input = self
.inner
.build()
.map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
let runtime_plugins = crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngress::operation_runtime_plugins(
self.handle.runtime_plugins.clone(),
&self.handle.conf,
self.config_override,
);
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngress::orchestrate(&runtime_plugins, input).await
}
/// Consumes this builder, creating a customizable operation that can be modified before being sent.
pub fn customize(
self,
) -> crate::client::customize::CustomizableOperation<
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressOutput,
crate::operation::authorize_security_group_ingress::AuthorizeSecurityGroupIngressError,
Self,
> {
crate::client::customize::CustomizableOperation::new(self)
}
pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
self.set_config_override(::std::option::Option::Some(config_override.into()));
self
}
pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
self.config_override = config_override;
self
}
/// <p>The IPv4 address range, in CIDR format.</p><note>
/// <p>Amazon Web Services <a href="https://en.wikipedia.org/wiki/Canonicalization">canonicalizes</a> IPv4 and IPv6 CIDRs. For example, if you specify 100.68.0.18/18 for the CIDR block, Amazon Web Services canonicalizes the CIDR block to 100.68.0.0/18. Any subsequent DescribeSecurityGroups and DescribeSecurityGroupRules calls will return the canonicalized form of the CIDR block. Additionally, if you attempt to add another rule with the non-canonical form of the CIDR (such as 100.68.0.18/18) and there is already a rule for the canonicalized form of the CIDR block (such as 100.68.0.0/18), the API throws an duplicate rule error.</p>
/// </note>
/// <p>To specify an IPv6 address range, use IP permissions instead.</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn cidr_ip(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.cidr_ip(input.into());
self
}
/// <p>The IPv4 address range, in CIDR format.</p><note>
/// <p>Amazon Web Services <a href="https://en.wikipedia.org/wiki/Canonicalization">canonicalizes</a> IPv4 and IPv6 CIDRs. For example, if you specify 100.68.0.18/18 for the CIDR block, Amazon Web Services canonicalizes the CIDR block to 100.68.0.0/18. Any subsequent DescribeSecurityGroups and DescribeSecurityGroupRules calls will return the canonicalized form of the CIDR block. Additionally, if you attempt to add another rule with the non-canonical form of the CIDR (such as 100.68.0.18/18) and there is already a rule for the canonicalized form of the CIDR block (such as 100.68.0.0/18), the API throws an duplicate rule error.</p>
/// </note>
/// <p>To specify an IPv6 address range, use IP permissions instead.</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn set_cidr_ip(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_cidr_ip(input);
self
}
/// <p>The IPv4 address range, in CIDR format.</p><note>
/// <p>Amazon Web Services <a href="https://en.wikipedia.org/wiki/Canonicalization">canonicalizes</a> IPv4 and IPv6 CIDRs. For example, if you specify 100.68.0.18/18 for the CIDR block, Amazon Web Services canonicalizes the CIDR block to 100.68.0.0/18. Any subsequent DescribeSecurityGroups and DescribeSecurityGroupRules calls will return the canonicalized form of the CIDR block. Additionally, if you attempt to add another rule with the non-canonical form of the CIDR (such as 100.68.0.18/18) and there is already a rule for the canonicalized form of the CIDR block (such as 100.68.0.0/18), the API throws an duplicate rule error.</p>
/// </note>
/// <p>To specify an IPv6 address range, use IP permissions instead.</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn get_cidr_ip(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_cidr_ip()
}
/// <p>If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn from_port(mut self, input: i32) -> Self {
self.inner = self.inner.from_port(input);
self
}
/// <p>If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn set_from_port(mut self, input: ::std::option::Option<i32>) -> Self {
self.inner = self.inner.set_from_port(input);
self
}
/// <p>If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn get_from_port(&self) -> &::std::option::Option<i32> {
self.inner.get_from_port()
}
/// <p>The ID of the security group.</p>
pub fn group_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.group_id(input.into());
self
}
/// <p>The ID of the security group.</p>
pub fn set_group_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_group_id(input);
self
}
/// <p>The ID of the security group.</p>
pub fn get_group_id(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_group_id()
}
/// <p>\[Default VPC\] The name of the security group. For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.</p>
pub fn group_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.group_name(input.into());
self
}
/// <p>\[Default VPC\] The name of the security group. For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.</p>
pub fn set_group_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_group_name(input);
self
}
/// <p>\[Default VPC\] The name of the security group. For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.</p>
pub fn get_group_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_group_name()
}
///
/// Appends an item to `IpPermissions`.
///
/// To override the contents of this collection use [`set_ip_permissions`](Self::set_ip_permissions).
///
/// <p>The permissions for the security group rules.</p>
pub fn ip_permissions(mut self, input: crate::types::IpPermission) -> Self {
self.inner = self.inner.ip_permissions(input);
self
}
/// <p>The permissions for the security group rules.</p>
pub fn set_ip_permissions(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::IpPermission>>) -> Self {
self.inner = self.inner.set_ip_permissions(input);
self
}
/// <p>The permissions for the security group rules.</p>
pub fn get_ip_permissions(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::IpPermission>> {
self.inner.get_ip_permissions()
}
/// <p>The IP protocol name (<code>tcp</code>, <code>udp</code>, <code>icmp</code>) or number (see <a href="http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml">Protocol Numbers</a>). To specify all protocols, use <code>-1</code>.</p>
/// <p>To specify <code>icmpv6</code>, use IP permissions instead.</p>
/// <p>If you specify a protocol other than one of the supported values, traffic is allowed on all ports, regardless of any ports that you specify.</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn ip_protocol(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.ip_protocol(input.into());
self
}
/// <p>The IP protocol name (<code>tcp</code>, <code>udp</code>, <code>icmp</code>) or number (see <a href="http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml">Protocol Numbers</a>). To specify all protocols, use <code>-1</code>.</p>
/// <p>To specify <code>icmpv6</code>, use IP permissions instead.</p>
/// <p>If you specify a protocol other than one of the supported values, traffic is allowed on all ports, regardless of any ports that you specify.</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn set_ip_protocol(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_ip_protocol(input);
self
}
/// <p>The IP protocol name (<code>tcp</code>, <code>udp</code>, <code>icmp</code>) or number (see <a href="http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml">Protocol Numbers</a>). To specify all protocols, use <code>-1</code>.</p>
/// <p>To specify <code>icmpv6</code>, use IP permissions instead.</p>
/// <p>If you specify a protocol other than one of the supported values, traffic is allowed on all ports, regardless of any ports that you specify.</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn get_ip_protocol(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_ip_protocol()
}
/// <p>\[Default VPC\] The name of the source security group.</p>
/// <p>The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, specify a set of IP permissions instead.</p>
pub fn source_security_group_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.source_security_group_name(input.into());
self
}
/// <p>\[Default VPC\] The name of the source security group.</p>
/// <p>The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, specify a set of IP permissions instead.</p>
pub fn set_source_security_group_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_source_security_group_name(input);
self
}
/// <p>\[Default VPC\] The name of the source security group.</p>
/// <p>The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, specify a set of IP permissions instead.</p>
pub fn get_source_security_group_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_source_security_group_name()
}
/// <p>The Amazon Web Services account ID for the source security group, if the source security group is in a different account.</p>
/// <p>The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, use IP permissions instead.</p>
pub fn source_security_group_owner_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.source_security_group_owner_id(input.into());
self
}
/// <p>The Amazon Web Services account ID for the source security group, if the source security group is in a different account.</p>
/// <p>The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, use IP permissions instead.</p>
pub fn set_source_security_group_owner_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_source_security_group_owner_id(input);
self
}
/// <p>The Amazon Web Services account ID for the source security group, if the source security group is in a different account.</p>
/// <p>The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, use IP permissions instead.</p>
pub fn get_source_security_group_owner_id(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_source_security_group_owner_id()
}
/// <p>If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn to_port(mut self, input: i32) -> Self {
self.inner = self.inner.to_port(input);
self
}
/// <p>If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn set_to_port(mut self, input: ::std::option::Option<i32>) -> Self {
self.inner = self.inner.set_to_port(input);
self
}
/// <p>If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).</p>
/// <p>To specify multiple rules and descriptions for the rules, use IP permissions instead.</p>
pub fn get_to_port(&self) -> &::std::option::Option<i32> {
self.inner.get_to_port()
}
///
/// Appends an item to `TagSpecifications`.
///
/// To override the contents of this collection use [`set_tag_specifications`](Self::set_tag_specifications).
///
/// <p>The tags applied to the security group rule.</p>
pub fn tag_specifications(mut self, input: crate::types::TagSpecification) -> Self {
self.inner = self.inner.tag_specifications(input);
self
}
/// <p>The tags applied to the security group rule.</p>
pub fn set_tag_specifications(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::TagSpecification>>) -> Self {
self.inner = self.inner.set_tag_specifications(input);
self
}
/// <p>The tags applied to the security group rule.</p>
pub fn get_tag_specifications(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::TagSpecification>> {
self.inner.get_tag_specifications()
}
/// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
pub fn dry_run(mut self, input: bool) -> Self {
self.inner = self.inner.dry_run(input);
self
}
/// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
pub fn set_dry_run(mut self, input: ::std::option::Option<bool>) -> Self {
self.inner = self.inner.set_dry_run(input);
self
}
/// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
pub fn get_dry_run(&self) -> &::std::option::Option<bool> {
self.inner.get_dry_run()
}
}