Struct aws_sdk_dax::input::CreateClusterInput
source · [−]#[non_exhaustive]pub struct CreateClusterInput {Show 14 fields
pub cluster_name: Option<String>,
pub node_type: Option<String>,
pub description: Option<String>,
pub replication_factor: i32,
pub availability_zones: Option<Vec<String>>,
pub subnet_group_name: Option<String>,
pub security_group_ids: Option<Vec<String>>,
pub preferred_maintenance_window: Option<String>,
pub notification_topic_arn: Option<String>,
pub iam_role_arn: Option<String>,
pub parameter_group_name: Option<String>,
pub tags: Option<Vec<Tag>>,
pub sse_specification: Option<SseSpecification>,
pub cluster_endpoint_encryption_type: Option<ClusterEndpointEncryptionType>,
}
Fields (Non-exhaustive)
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.cluster_name: Option<String>
The cluster identifier. This parameter is stored as a lowercase string.
Constraints:
-
A name must contain from 1 to 20 alphanumeric characters or hyphens.
-
The first character must be a letter.
-
A name cannot end with a hyphen or contain two consecutive hyphens.
node_type: Option<String>
The compute and memory capacity of the nodes in the cluster.
description: Option<String>
A description of the cluster.
replication_factor: i32
The number of nodes in the DAX cluster. A replication factor of 1 will create a single-node cluster, without any read replicas. For additional fault tolerance, you can create a multiple node cluster with one or more read replicas. To do this, set ReplicationFactor
to a number between 3 (one primary and two read replicas) and 10 (one primary and nine read replicas). If the AvailabilityZones
parameter is provided, its length must equal the ReplicationFactor
.
AWS recommends that you have at least two read replicas per cluster.
availability_zones: Option<Vec<String>>
The Availability Zones (AZs) in which the cluster nodes will reside after the cluster has been created or updated. If provided, the length of this list must equal the ReplicationFactor
parameter. If you omit this parameter, DAX will spread the nodes across Availability Zones for the highest availability.
subnet_group_name: Option<String>
The name of the subnet group to be used for the replication group.
DAX clusters can only run in an Amazon VPC environment. All of the subnets that you specify in a subnet group must exist in the same VPC.
security_group_ids: Option<Vec<String>>
A list of security group IDs to be assigned to each node in the DAX cluster. (Each of the security group ID is system-generated.)
If this parameter is not specified, DAX assigns the default VPC security group to each node.
preferred_maintenance_window: Option<String>
Specifies the weekly time range during which maintenance on the DAX cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for ddd
are:
-
sun
-
mon
-
tue
-
wed
-
thu
-
fri
-
sat
Example: sun:05:00-sun:09:00
If you don't specify a preferred maintenance window when you create or modify a cache cluster, DAX assigns a 60-minute maintenance window on a randomly selected day of the week.
notification_topic_arn: Option<String>
The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications will be sent.
The Amazon SNS topic owner must be same as the DAX cluster owner.
iam_role_arn: Option<String>
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
parameter_group_name: Option<String>
The parameter group to be associated with the DAX cluster.
A set of tags to associate with the DAX cluster.
sse_specification: Option<SseSpecification>
Represents the settings used to enable server-side encryption on the cluster.
cluster_endpoint_encryption_type: Option<ClusterEndpointEncryptionType>
The type of encryption the cluster's endpoint should support. Values are:
-
NONE
for no encryption -
TLS
for Transport Layer Security
Implementations
sourceimpl CreateClusterInput
impl CreateClusterInput
sourcepub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<CreateCluster, AwsErrorRetryPolicy>, BuildError>
pub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<CreateCluster, AwsErrorRetryPolicy>, BuildError>
Consumes the builder and constructs an Operation<CreateCluster
>
sourcepub fn builder() -> Builder
pub fn builder() -> Builder
Creates a new builder-style object to manufacture CreateClusterInput
sourceimpl CreateClusterInput
impl CreateClusterInput
sourcepub fn cluster_name(&self) -> Option<&str>
pub fn cluster_name(&self) -> Option<&str>
The cluster identifier. This parameter is stored as a lowercase string.
Constraints:
-
A name must contain from 1 to 20 alphanumeric characters or hyphens.
-
The first character must be a letter.
-
A name cannot end with a hyphen or contain two consecutive hyphens.
sourcepub fn node_type(&self) -> Option<&str>
pub fn node_type(&self) -> Option<&str>
The compute and memory capacity of the nodes in the cluster.
sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
A description of the cluster.
sourcepub fn replication_factor(&self) -> i32
pub fn replication_factor(&self) -> i32
The number of nodes in the DAX cluster. A replication factor of 1 will create a single-node cluster, without any read replicas. For additional fault tolerance, you can create a multiple node cluster with one or more read replicas. To do this, set ReplicationFactor
to a number between 3 (one primary and two read replicas) and 10 (one primary and nine read replicas). If the AvailabilityZones
parameter is provided, its length must equal the ReplicationFactor
.
AWS recommends that you have at least two read replicas per cluster.
sourcepub fn availability_zones(&self) -> Option<&[String]>
pub fn availability_zones(&self) -> Option<&[String]>
The Availability Zones (AZs) in which the cluster nodes will reside after the cluster has been created or updated. If provided, the length of this list must equal the ReplicationFactor
parameter. If you omit this parameter, DAX will spread the nodes across Availability Zones for the highest availability.
sourcepub fn subnet_group_name(&self) -> Option<&str>
pub fn subnet_group_name(&self) -> Option<&str>
The name of the subnet group to be used for the replication group.
DAX clusters can only run in an Amazon VPC environment. All of the subnets that you specify in a subnet group must exist in the same VPC.
sourcepub fn security_group_ids(&self) -> Option<&[String]>
pub fn security_group_ids(&self) -> Option<&[String]>
A list of security group IDs to be assigned to each node in the DAX cluster. (Each of the security group ID is system-generated.)
If this parameter is not specified, DAX assigns the default VPC security group to each node.
sourcepub fn preferred_maintenance_window(&self) -> Option<&str>
pub fn preferred_maintenance_window(&self) -> Option<&str>
Specifies the weekly time range during which maintenance on the DAX cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for ddd
are:
-
sun
-
mon
-
tue
-
wed
-
thu
-
fri
-
sat
Example: sun:05:00-sun:09:00
If you don't specify a preferred maintenance window when you create or modify a cache cluster, DAX assigns a 60-minute maintenance window on a randomly selected day of the week.
sourcepub fn notification_topic_arn(&self) -> Option<&str>
pub fn notification_topic_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications will be sent.
The Amazon SNS topic owner must be same as the DAX cluster owner.
sourcepub fn iam_role_arn(&self) -> Option<&str>
pub fn iam_role_arn(&self) -> Option<&str>
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
sourcepub fn parameter_group_name(&self) -> Option<&str>
pub fn parameter_group_name(&self) -> Option<&str>
The parameter group to be associated with the DAX cluster.
A set of tags to associate with the DAX cluster.
sourcepub fn sse_specification(&self) -> Option<&SseSpecification>
pub fn sse_specification(&self) -> Option<&SseSpecification>
Represents the settings used to enable server-side encryption on the cluster.
sourcepub fn cluster_endpoint_encryption_type(
&self
) -> Option<&ClusterEndpointEncryptionType>
pub fn cluster_endpoint_encryption_type(
&self
) -> Option<&ClusterEndpointEncryptionType>
The type of encryption the cluster's endpoint should support. Values are:
-
NONE
for no encryption -
TLS
for Transport Layer Security
Trait Implementations
sourceimpl Clone for CreateClusterInput
impl Clone for CreateClusterInput
sourcefn clone(&self) -> CreateClusterInput
fn clone(&self) -> CreateClusterInput
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for CreateClusterInput
impl Debug for CreateClusterInput
sourceimpl PartialEq<CreateClusterInput> for CreateClusterInput
impl PartialEq<CreateClusterInput> for CreateClusterInput
sourcefn eq(&self, other: &CreateClusterInput) -> bool
fn eq(&self, other: &CreateClusterInput) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &CreateClusterInput) -> bool
fn ne(&self, other: &CreateClusterInput) -> bool
This method tests for !=
.
impl StructuralPartialEq for CreateClusterInput
Auto Trait Implementations
impl RefUnwindSafe for CreateClusterInput
impl Send for CreateClusterInput
impl Sync for CreateClusterInput
impl Unpin for CreateClusterInput
impl UnwindSafe for CreateClusterInput
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more