aws-sdk-connect 1.166.0

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::associate_email_address_alias::_associate_email_address_alias_input::AssociateEmailAddressAliasInputBuilder;

pub use crate::operation::associate_email_address_alias::_associate_email_address_alias_output::AssociateEmailAddressAliasOutputBuilder;

impl crate::operation::associate_email_address_alias::builders::AssociateEmailAddressAliasInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::associate_email_address_alias::AssociateEmailAddressAliasOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::associate_email_address_alias::AssociateEmailAddressAliasError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.associate_email_address_alias();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `AssociateEmailAddressAlias`.
///
/// <p>Associates an email address alias with an existing email address in an Amazon Connect instance. This creates a forwarding relationship where emails sent to the alias email address are automatically forwarded to the primary email address.</p>
/// <p><b>Use cases</b></p>
/// <p>Following are common uses cases for this API:</p>
/// <ul>
/// <li>
/// <p><b>Unified customer support</b>: Create multiple entry points (for example, support@example.com, help@example.com, customercare@example.com) that all forward to a single agent queue for streamlined management.</p></li>
/// <li>
/// <p><b>Department consolidation</b>: Forward emails from legacy department addresses (for example, sales@example.com, info@example.com) to a centralized customer service email during organizational restructuring.</p></li>
/// <li>
/// <p><b>Brand management</b>: Enable you to use familiar brand-specific email addresses that forward to the appropriate Amazon Connect instance email address.</p></li>
/// </ul>
/// <p><b>Important things to know</b></p>
/// <ul>
/// <li>
/// <p>Each email address can have a maximum of one alias. You cannot create multiple aliases for the same email address.</p></li>
/// <li>
/// <p>If the alias email address already receives direct emails, it continues to receive direct emails plus forwarded emails.</p></li>
/// <li>
/// <p>You cannot chain email aliases together (that is, create an alias of an alias).</p></li>
/// </ul>
/// <p><code>AssociateEmailAddressAlias</code> does not return the following information:</p>
/// <ul>
/// <li>
/// <p>A confirmation of the alias relationship details (you must call <a href="https://docs.aws.amazon.com/connect/latest/APIReference/API_DescribeEmailAddress.html">DescribeEmailAddress</a> to verify).</p></li>
/// <li>
/// <p>The timestamp of when the association occurred.</p></li>
/// <li>
/// <p>The status of the forwarding configuration.</p></li>
/// </ul>
/// <p><b>Endpoints</b>: See <a href="https://docs.aws.amazon.com/general/latest/gr/connect_region.html">Amazon Connect endpoints and quotas</a>.</p>
/// <p><b>Related operations</b></p>
/// <ul>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/connect/latest/APIReference/API_DisassociateEmailAddressAlias.html">DisassociateEmailAddressAlias</a>: Removes the alias association between two email addresses in an Amazon Connect instance.</p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/connect/latest/APIReference/API_DescribeEmailAddress.html">DescribeEmailAddress</a>: View current alias configurations for an email address.</p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/connect/latest/APIReference/API_SearchEmailAddresses.html">SearchEmailAddresses</a>: Find email addresses and their alias relationships across an instance.</p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/connect/latest/APIReference/API_CreateEmailAddress.html">CreateEmailAddress</a>: Create new email addresses that can participate in alias relationships.</p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/connect/latest/APIReference/API_DeleteEmailAddress.html">DeleteEmailAddress</a>: Remove email addresses (automatically removes any alias relationships).</p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/connect/latest/APIReference/API_UpdateEmailAddressMetadata.html">UpdateEmailAddressMetadata</a>: Modify email address properties (does not affect alias relationships).</p></li>
/// </ul>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct AssociateEmailAddressAliasFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::associate_email_address_alias::builders::AssociateEmailAddressAliasInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::associate_email_address_alias::AssociateEmailAddressAliasOutput,
        crate::operation::associate_email_address_alias::AssociateEmailAddressAliasError,
    > for AssociateEmailAddressAliasFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::associate_email_address_alias::AssociateEmailAddressAliasOutput,
            crate::operation::associate_email_address_alias::AssociateEmailAddressAliasError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl AssociateEmailAddressAliasFluentBuilder {
    /// Creates a new `AssociateEmailAddressAliasFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the AssociateEmailAddressAlias as a reference.
    pub fn as_input(&self) -> &crate::operation::associate_email_address_alias::builders::AssociateEmailAddressAliasInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::associate_email_address_alias::AssociateEmailAddressAliasOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::associate_email_address_alias::AssociateEmailAddressAliasError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::associate_email_address_alias::AssociateEmailAddressAlias::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::associate_email_address_alias::AssociateEmailAddressAlias::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::associate_email_address_alias::AssociateEmailAddressAliasOutput,
        crate::operation::associate_email_address_alias::AssociateEmailAddressAliasError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The identifier of the email address.</p>
    pub fn email_address_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.email_address_id(input.into());
        self
    }
    /// <p>The identifier of the email address.</p>
    pub fn set_email_address_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_email_address_id(input);
        self
    }
    /// <p>The identifier of the email address.</p>
    pub fn get_email_address_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_email_address_id()
    }
    /// <p>The identifier of the Amazon Connect instance. You can <a href="https://docs.aws.amazon.com/connect/latest/adminguide/find-instance-arn.html">find the instance ID</a> in the Amazon Resource Name (ARN) of the instance.</p>
    pub fn instance_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.instance_id(input.into());
        self
    }
    /// <p>The identifier of the Amazon Connect instance. You can <a href="https://docs.aws.amazon.com/connect/latest/adminguide/find-instance-arn.html">find the instance ID</a> in the Amazon Resource Name (ARN) of the instance.</p>
    pub fn set_instance_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_instance_id(input);
        self
    }
    /// <p>The identifier of the Amazon Connect instance. You can <a href="https://docs.aws.amazon.com/connect/latest/adminguide/find-instance-arn.html">find the instance ID</a> in the Amazon Resource Name (ARN) of the instance.</p>
    pub fn get_instance_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_instance_id()
    }
    /// <p>Configuration object that specifies which email address will serve as the alias. The specified email address must already exist in the Amazon Connect instance and cannot already be configured as an alias or have an alias of its own.</p>
    pub fn alias_configuration(mut self, input: crate::types::AliasConfiguration) -> Self {
        self.inner = self.inner.alias_configuration(input);
        self
    }
    /// <p>Configuration object that specifies which email address will serve as the alias. The specified email address must already exist in the Amazon Connect instance and cannot already be configured as an alias or have an alias of its own.</p>
    pub fn set_alias_configuration(mut self, input: ::std::option::Option<crate::types::AliasConfiguration>) -> Self {
        self.inner = self.inner.set_alias_configuration(input);
        self
    }
    /// <p>Configuration object that specifies which email address will serve as the alias. The specified email address must already exist in the Amazon Connect instance and cannot already be configured as an alias or have an alias of its own.</p>
    pub fn get_alias_configuration(&self) -> &::std::option::Option<crate::types::AliasConfiguration> {
        self.inner.get_alias_configuration()
    }
    /// <p>A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see <a href="https://aws.amazon.com/builders-library/making-retries-safe-with-idempotent-APIs/">Making retries safe with idempotent APIs</a>.</p>
    pub fn client_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.client_token(input.into());
        self
    }
    /// <p>A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see <a href="https://aws.amazon.com/builders-library/making-retries-safe-with-idempotent-APIs/">Making retries safe with idempotent APIs</a>.</p>
    pub fn set_client_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_client_token(input);
        self
    }
    /// <p>A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see <a href="https://aws.amazon.com/builders-library/making-retries-safe-with-idempotent-APIs/">Making retries safe with idempotent APIs</a>.</p>
    pub fn get_client_token(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_client_token()
    }
}