#[non_exhaustive]pub struct AdminCreateUserInput {
pub user_pool_id: Option<String>,
pub username: Option<String>,
pub user_attributes: Option<Vec<AttributeType>>,
pub validation_data: Option<Vec<AttributeType>>,
pub temporary_password: Option<String>,
pub force_alias_creation: Option<bool>,
pub message_action: Option<MessageActionType>,
pub desired_delivery_mediums: Option<Vec<DeliveryMediumType>>,
pub client_metadata: Option<HashMap<String, String>>,
}
Expand description
Represents the request to create a user in the specified user pool.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.user_pool_id: Option<String>
The user pool ID for the user pool where the user will be created.
username: Option<String>
The value that you want to set as the username sign-in attribute. The following conditions apply to the username parameter.
-
The username can't be a duplicate of another username in the same user pool.
-
You can't change the value of a username after you create it.
-
You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a username value. For more information, see Customizing sign-in attributes.
user_attributes: Option<Vec<AttributeType>>
An array of name-value pairs that contain user attributes and attribute values to be set for the user to be created. You can create a user without specifying any attributes other than Username
. However, any attributes that you specify as required (when creating a user pool or in the Attributes tab of the console) either you should supply (in your call to AdminCreateUser
) or the user should supply (when they sign up in response to your welcome message).
For custom attributes, you must prepend the custom:
prefix to the attribute name.
To send a message inviting the user to sign up, you must specify the user's email address or phone number. You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.
In your call to AdminCreateUser
, you can set the email_verified
attribute to True
, and you can set the phone_number_verified
attribute to True
. You can also do this by calling AdminUpdateUserAttributes.
-
email: The email address of the user to whom the message that contains the code and username will be sent. Required if the
email_verified
attribute is set toTrue
, or if"EMAIL"
is specified in theDesiredDeliveryMediums
parameter. -
phone_number: The phone number of the user to whom the message that contains the code and username will be sent. Required if the
phone_number_verified
attribute is set toTrue
, or if"SMS"
is specified in theDesiredDeliveryMediums
parameter.
validation_data: Option<Vec<AttributeType>>
Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of key-value pairs are for custom validation of information that you collect from your users but don't need to retain.
Your Lambda function can analyze this additional data and act on it. Your function might perform external API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they sign up from within your network.
For more information about the pre sign-up Lambda trigger, see Pre sign-up Lambda trigger.
temporary_password: Option<String>
The user's temporary password. This password must conform to the password policy that you specified when you created the user pool.
The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
The temporary password can only be used until the user account expiration limit that you set for your user pool. To reset the account after that time limit, you must call AdminCreateUser
again and specify RESEND
for the MessageAction
parameter.
force_alias_creation: Option<bool>
This parameter is used only if the phone_number_verified
or email_verified
attribute is set to True
. Otherwise, it is ignored.
If this parameter is set to True
and the phone number or email address specified in the UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias from the previous user to the newly created user. The previous user will no longer be able to log in using that alias.
If this parameter is set to False
, the API throws an AliasExistsException
error if the alias already exists. The default value is False
.
message_action: Option<MessageActionType>
Set to RESEND
to resend the invitation message to a user that already exists and reset the expiration limit on the user's account. Set to SUPPRESS
to suppress sending the message. You can specify only one value.
desired_delivery_mediums: Option<Vec<DeliveryMediumType>>
Specify "EMAIL"
if email will be used to send the welcome message. Specify "SMS"
if the phone number will be used. The default value is "SMS"
. You can specify more than one value.
client_metadata: Option<HashMap<String, String>>
A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.
You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload contains a clientMetadata
attribute, which provides the data that you assigned to the ClientMetadata parameter in your AdminCreateUser request. In your function code in Lambda, you can process the clientMetadata
value to enhance your workflow for your specific needs.
For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
-
Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata parameter serves no purpose.
-
Validate the ClientMetadata value.
-
Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
Implementations§
source§impl AdminCreateUserInput
impl AdminCreateUserInput
sourcepub fn user_pool_id(&self) -> Option<&str>
pub fn user_pool_id(&self) -> Option<&str>
The user pool ID for the user pool where the user will be created.
sourcepub fn username(&self) -> Option<&str>
pub fn username(&self) -> Option<&str>
The value that you want to set as the username sign-in attribute. The following conditions apply to the username parameter.
-
The username can't be a duplicate of another username in the same user pool.
-
You can't change the value of a username after you create it.
-
You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a username value. For more information, see Customizing sign-in attributes.
sourcepub fn user_attributes(&self) -> &[AttributeType]
pub fn user_attributes(&self) -> &[AttributeType]
An array of name-value pairs that contain user attributes and attribute values to be set for the user to be created. You can create a user without specifying any attributes other than Username
. However, any attributes that you specify as required (when creating a user pool or in the Attributes tab of the console) either you should supply (in your call to AdminCreateUser
) or the user should supply (when they sign up in response to your welcome message).
For custom attributes, you must prepend the custom:
prefix to the attribute name.
To send a message inviting the user to sign up, you must specify the user's email address or phone number. You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.
In your call to AdminCreateUser
, you can set the email_verified
attribute to True
, and you can set the phone_number_verified
attribute to True
. You can also do this by calling AdminUpdateUserAttributes.
-
email: The email address of the user to whom the message that contains the code and username will be sent. Required if the
email_verified
attribute is set toTrue
, or if"EMAIL"
is specified in theDesiredDeliveryMediums
parameter. -
phone_number: The phone number of the user to whom the message that contains the code and username will be sent. Required if the
phone_number_verified
attribute is set toTrue
, or if"SMS"
is specified in theDesiredDeliveryMediums
parameter.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .user_attributes.is_none()
.
sourcepub fn validation_data(&self) -> &[AttributeType]
pub fn validation_data(&self) -> &[AttributeType]
Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of key-value pairs are for custom validation of information that you collect from your users but don't need to retain.
Your Lambda function can analyze this additional data and act on it. Your function might perform external API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they sign up from within your network.
For more information about the pre sign-up Lambda trigger, see Pre sign-up Lambda trigger.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .validation_data.is_none()
.
sourcepub fn temporary_password(&self) -> Option<&str>
pub fn temporary_password(&self) -> Option<&str>
The user's temporary password. This password must conform to the password policy that you specified when you created the user pool.
The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the temporary password in the sign-in page, along with a new password to be used in all future sign-ins.
This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.
The temporary password can only be used until the user account expiration limit that you set for your user pool. To reset the account after that time limit, you must call AdminCreateUser
again and specify RESEND
for the MessageAction
parameter.
sourcepub fn force_alias_creation(&self) -> Option<bool>
pub fn force_alias_creation(&self) -> Option<bool>
This parameter is used only if the phone_number_verified
or email_verified
attribute is set to True
. Otherwise, it is ignored.
If this parameter is set to True
and the phone number or email address specified in the UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias from the previous user to the newly created user. The previous user will no longer be able to log in using that alias.
If this parameter is set to False
, the API throws an AliasExistsException
error if the alias already exists. The default value is False
.
sourcepub fn message_action(&self) -> Option<&MessageActionType>
pub fn message_action(&self) -> Option<&MessageActionType>
Set to RESEND
to resend the invitation message to a user that already exists and reset the expiration limit on the user's account. Set to SUPPRESS
to suppress sending the message. You can specify only one value.
sourcepub fn desired_delivery_mediums(&self) -> &[DeliveryMediumType]
pub fn desired_delivery_mediums(&self) -> &[DeliveryMediumType]
Specify "EMAIL"
if email will be used to send the welcome message. Specify "SMS"
if the phone number will be used. The default value is "SMS"
. You can specify more than one value.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .desired_delivery_mediums.is_none()
.
sourcepub fn client_metadata(&self) -> Option<&HashMap<String, String>>
pub fn client_metadata(&self) -> Option<&HashMap<String, String>>
A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.
You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload contains a clientMetadata
attribute, which provides the data that you assigned to the ClientMetadata parameter in your AdminCreateUser request. In your function code in Lambda, you can process the clientMetadata
value to enhance your workflow for your specific needs.
For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.
When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:
-
Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata parameter serves no purpose.
-
Validate the ClientMetadata value.
-
Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.
source§impl AdminCreateUserInput
impl AdminCreateUserInput
sourcepub fn builder() -> AdminCreateUserInputBuilder
pub fn builder() -> AdminCreateUserInputBuilder
Creates a new builder-style object to manufacture AdminCreateUserInput
.
Trait Implementations§
source§impl Clone for AdminCreateUserInput
impl Clone for AdminCreateUserInput
source§fn clone(&self) -> AdminCreateUserInput
fn clone(&self) -> AdminCreateUserInput
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for AdminCreateUserInput
impl Debug for AdminCreateUserInput
source§impl PartialEq for AdminCreateUserInput
impl PartialEq for AdminCreateUserInput
source§fn eq(&self, other: &AdminCreateUserInput) -> bool
fn eq(&self, other: &AdminCreateUserInput) -> bool
self
and other
values to be equal, and is used
by ==
.impl StructuralPartialEq for AdminCreateUserInput
Auto Trait Implementations§
impl Freeze for AdminCreateUserInput
impl RefUnwindSafe for AdminCreateUserInput
impl Send for AdminCreateUserInput
impl Sync for AdminCreateUserInput
impl Unpin for AdminCreateUserInput
impl UnwindSafe for AdminCreateUserInput
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read more