// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
/// Metadata from an individual GET response used to download a chunk. Optional fields remain absent when that response does not return them. Content length and range describe this response, which may cover only part of the object. Reported checksums do not by themselves indicate that the delivered bytes were checksum-validated.
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default)]
pub struct ChunkMetadata {
/// <p>Indicates that a range of bytes was specified in the request.</p>
pub accept_ranges: ::std::option::Option<::std::string::String>,
/// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
pub bucket_key_enabled: ::std::option::Option<bool>,
/// <p>Specifies caching behavior along the request/reply chain.</p>
pub cache_control: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub checksum_crc32: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub checksum_crc32_c: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub checksum_crc64_nvme: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub checksum_md5: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub checksum_sha1: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub checksum_sha256: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub checksum_sha512: ::std::option::Option<::std::string::String>,
/// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub checksum_type: ::std::option::Option<crate::model::ChecksumType>,
/// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub checksum_xxhash128: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub checksum_xxhash3: ::std::option::Option<::std::string::String>,
/// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub checksum_xxhash64: ::std::option::Option<::std::string::String>,
/// <p>Specifies presentational information for the object.</p>
pub content_disposition: ::std::option::Option<::std::string::String>,
/// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
pub content_encoding: ::std::option::Option<::std::string::String>,
/// <p>The language the content is in.</p>
pub content_language: ::std::option::Option<::std::string::String>,
/// <p>Size of the body in bytes.</p>
pub content_length: ::std::option::Option<i64>,
/// <p>The portion of the object returned in the response.</p>
pub content_range: ::std::option::Option<::std::string::String>,
/// <p>A standard MIME type describing the format of the object data.</p>
pub content_type: ::std::option::Option<::std::string::String>,
/// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
/// <ul>
/// <li>
/// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
/// <li>
/// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
/// </ul>
/// </note>
pub delete_marker: ::std::option::Option<bool>,
/// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
pub e_tag: ::std::option::Option<::std::string::String>,
/// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
/// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
/// </note>
pub expiration: ::std::option::Option<::std::string::String>,
/// <p>Date and time when the object was last modified.</p>
/// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
pub last_modified: ::std::option::Option<::aws_smithy_types::DateTime>,
/// <p>A map of metadata to store with the object in S3.</p>
pub metadata: ::std::option::Option<
::std::collections::HashMap<::std::string::String, ::std::string::String>,
>,
/// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub missing_meta: ::std::option::Option<i32>,
/// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub object_lock_legal_hold_status:
::std::option::Option<crate::model::ObjectLockLegalHoldStatus>,
/// <p>The Object Lock mode that's currently in place for this object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub object_lock_mode: ::std::option::Option<crate::model::ObjectLockMode>,
/// <p>The date and time when this object's Object Lock will expire.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub object_lock_retain_until_date: ::std::option::Option<::aws_smithy_types::DateTime>,
/// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
pub parts_count: ::std::option::Option<i32>,
/// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub replication_status: ::std::option::Option<crate::model::ReplicationStatus>,
/// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub request_charged: ::std::option::Option<crate::model::RequestCharged>,
/// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
/// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub restore: ::std::option::Option<::std::string::String>,
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub sse_customer_algorithm: ::std::option::Option<::std::string::String>,
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub sse_customer_key_md5: ::std::option::Option<::std::string::String>,
/// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
pub ssekms_key_id: ::std::option::Option<::std::string::String>,
/// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
/// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
/// </note>
pub server_side_encryption: ::std::option::Option<crate::model::ServerSideEncryption>,
/// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
/// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub storage_class: ::std::option::Option<crate::model::StorageClass>,
/// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
/// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub tag_count: ::std::option::Option<i32>,
/// <p>Version ID of the object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub version_id: ::std::option::Option<::std::string::String>,
/// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub website_redirect_location: ::std::option::Option<::std::string::String>,
/// <p>The date and time at which the object is no longer cacheable.</p>
pub expires_string: ::std::option::Option<::std::string::String>,
/// S3 request ID.
_request_id: ::std::option::Option<::std::string::String>,
/// S3 extended request ID.
_extended_request_id: ::std::option::Option<::std::string::String>,
}
impl ChunkMetadata {
/// <p>Indicates that a range of bytes was specified in the request.</p>
pub fn accept_ranges(&self) -> ::std::option::Option<&str> {
self.accept_ranges.as_deref()
}
/// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
pub fn bucket_key_enabled(&self) -> ::std::option::Option<bool> {
self.bucket_key_enabled
}
/// <p>Specifies caching behavior along the request/reply chain.</p>
pub fn cache_control(&self) -> ::std::option::Option<&str> {
self.cache_control.as_deref()
}
/// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_crc32(&self) -> ::std::option::Option<&str> {
self.checksum_crc32.as_deref()
}
/// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_crc32_c(&self) -> ::std::option::Option<&str> {
self.checksum_crc32_c.as_deref()
}
/// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_crc64_nvme(&self) -> ::std::option::Option<&str> {
self.checksum_crc64_nvme.as_deref()
}
/// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_md5(&self) -> ::std::option::Option<&str> {
self.checksum_md5.as_deref()
}
/// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_sha1(&self) -> ::std::option::Option<&str> {
self.checksum_sha1.as_deref()
}
/// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_sha256(&self) -> ::std::option::Option<&str> {
self.checksum_sha256.as_deref()
}
/// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_sha512(&self) -> ::std::option::Option<&str> {
self.checksum_sha512.as_deref()
}
/// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_type(&self) -> ::std::option::Option<&crate::model::ChecksumType> {
self.checksum_type.as_ref()
}
/// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_xxhash128(&self) -> ::std::option::Option<&str> {
self.checksum_xxhash128.as_deref()
}
/// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_xxhash3(&self) -> ::std::option::Option<&str> {
self.checksum_xxhash3.as_deref()
}
/// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_xxhash64(&self) -> ::std::option::Option<&str> {
self.checksum_xxhash64.as_deref()
}
/// <p>Specifies presentational information for the object.</p>
pub fn content_disposition(&self) -> ::std::option::Option<&str> {
self.content_disposition.as_deref()
}
/// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
pub fn content_encoding(&self) -> ::std::option::Option<&str> {
self.content_encoding.as_deref()
}
/// <p>The language the content is in.</p>
pub fn content_language(&self) -> ::std::option::Option<&str> {
self.content_language.as_deref()
}
/// <p>Size of the body in bytes.</p>
pub fn content_length(&self) -> ::std::option::Option<i64> {
self.content_length
}
/// <p>The portion of the object returned in the response.</p>
pub fn content_range(&self) -> ::std::option::Option<&str> {
self.content_range.as_deref()
}
/// <p>A standard MIME type describing the format of the object data.</p>
pub fn content_type(&self) -> ::std::option::Option<&str> {
self.content_type.as_deref()
}
/// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
/// <ul>
/// <li>
/// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
/// <li>
/// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
/// </ul>
/// </note>
pub fn delete_marker(&self) -> ::std::option::Option<bool> {
self.delete_marker
}
/// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
pub fn e_tag(&self) -> ::std::option::Option<&str> {
self.e_tag.as_deref()
}
/// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
/// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
/// </note>
pub fn expiration(&self) -> ::std::option::Option<&str> {
self.expiration.as_deref()
}
/// <p>Date and time when the object was last modified.</p>
/// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
pub fn last_modified(&self) -> ::std::option::Option<&::aws_smithy_types::DateTime> {
self.last_modified.as_ref()
}
/// <p>A map of metadata to store with the object in S3.</p>
pub fn metadata(
&self,
) -> ::std::option::Option<
&::std::collections::HashMap<::std::string::String, ::std::string::String>,
> {
self.metadata.as_ref()
}
/// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn missing_meta(&self) -> ::std::option::Option<i32> {
self.missing_meta
}
/// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn object_lock_legal_hold_status(
&self,
) -> ::std::option::Option<&crate::model::ObjectLockLegalHoldStatus> {
self.object_lock_legal_hold_status.as_ref()
}
/// <p>The Object Lock mode that's currently in place for this object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn object_lock_mode(&self) -> ::std::option::Option<&crate::model::ObjectLockMode> {
self.object_lock_mode.as_ref()
}
/// <p>The date and time when this object's Object Lock will expire.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn object_lock_retain_until_date(
&self,
) -> ::std::option::Option<&::aws_smithy_types::DateTime> {
self.object_lock_retain_until_date.as_ref()
}
/// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
pub fn parts_count(&self) -> ::std::option::Option<i32> {
self.parts_count
}
/// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn replication_status(&self) -> ::std::option::Option<&crate::model::ReplicationStatus> {
self.replication_status.as_ref()
}
/// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn request_charged(&self) -> ::std::option::Option<&crate::model::RequestCharged> {
self.request_charged.as_ref()
}
/// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
/// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub fn restore(&self) -> ::std::option::Option<&str> {
self.restore.as_deref()
}
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn sse_customer_algorithm(&self) -> ::std::option::Option<&str> {
self.sse_customer_algorithm.as_deref()
}
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn sse_customer_key_md5(&self) -> ::std::option::Option<&str> {
self.sse_customer_key_md5.as_deref()
}
/// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
pub fn ssekms_key_id(&self) -> ::std::option::Option<&str> {
self.ssekms_key_id.as_deref()
}
/// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
/// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
/// </note>
pub fn server_side_encryption(
&self,
) -> ::std::option::Option<&crate::model::ServerSideEncryption> {
self.server_side_encryption.as_ref()
}
/// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
/// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub fn storage_class(&self) -> ::std::option::Option<&crate::model::StorageClass> {
self.storage_class.as_ref()
}
/// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
/// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn tag_count(&self) -> ::std::option::Option<i32> {
self.tag_count
}
/// <p>Version ID of the object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn version_id(&self) -> ::std::option::Option<&str> {
self.version_id.as_deref()
}
/// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn website_redirect_location(&self) -> ::std::option::Option<&str> {
self.website_redirect_location.as_deref()
}
/// <p>The date and time at which the object is no longer cacheable.</p>
pub fn expires_string(&self) -> ::std::option::Option<&str> {
self.expires_string.as_deref()
}
}
impl ::std::fmt::Debug for ChunkMetadata {
fn fmt(&self, f: &mut ::std::fmt::Formatter<'_>) -> ::std::fmt::Result {
let mut formatter = f.debug_struct("ChunkMetadata");
formatter.field("accept_ranges", &self.accept_ranges);
formatter.field("bucket_key_enabled", &self.bucket_key_enabled);
formatter.field("cache_control", &self.cache_control);
formatter.field("checksum_crc32", &self.checksum_crc32);
formatter.field("checksum_crc32_c", &self.checksum_crc32_c);
formatter.field("checksum_crc64_nvme", &self.checksum_crc64_nvme);
formatter.field("checksum_md5", &self.checksum_md5);
formatter.field("checksum_sha1", &self.checksum_sha1);
formatter.field("checksum_sha256", &self.checksum_sha256);
formatter.field("checksum_sha512", &self.checksum_sha512);
formatter.field("checksum_type", &self.checksum_type);
formatter.field("checksum_xxhash128", &self.checksum_xxhash128);
formatter.field("checksum_xxhash3", &self.checksum_xxhash3);
formatter.field("checksum_xxhash64", &self.checksum_xxhash64);
formatter.field("content_disposition", &self.content_disposition);
formatter.field("content_encoding", &self.content_encoding);
formatter.field("content_language", &self.content_language);
formatter.field("content_length", &self.content_length);
formatter.field("content_range", &self.content_range);
formatter.field("content_type", &self.content_type);
formatter.field("delete_marker", &self.delete_marker);
formatter.field("e_tag", &self.e_tag);
formatter.field("expiration", &self.expiration);
formatter.field("last_modified", &self.last_modified);
formatter.field("metadata", &self.metadata);
formatter.field("missing_meta", &self.missing_meta);
formatter.field(
"object_lock_legal_hold_status",
&self.object_lock_legal_hold_status,
);
formatter.field("object_lock_mode", &self.object_lock_mode);
formatter.field(
"object_lock_retain_until_date",
&self.object_lock_retain_until_date,
);
formatter.field("parts_count", &self.parts_count);
formatter.field("replication_status", &self.replication_status);
formatter.field("request_charged", &self.request_charged);
formatter.field("restore", &self.restore);
formatter.field("sse_customer_algorithm", &self.sse_customer_algorithm);
formatter.field("sse_customer_key_md5", &self.sse_customer_key_md5);
formatter.field("ssekms_key_id", &"*** Sensitive Data Redacted ***");
formatter.field("server_side_encryption", &self.server_side_encryption);
formatter.field("storage_class", &self.storage_class);
formatter.field("tag_count", &self.tag_count);
formatter.field("version_id", &self.version_id);
formatter.field("website_redirect_location", &self.website_redirect_location);
formatter.field("expires_string", &self.expires_string);
formatter.field("_request_id", &self._request_id);
formatter.field("_extended_request_id", &self._extended_request_id);
formatter.finish()
}
}
impl crate::model::ChunkMetadata {
/// S3 request ID.
pub fn request_id(&self) -> ::std::option::Option<&str> {
self._request_id.as_deref()
}
/// S3 extended request ID.
pub fn extended_request_id(&self) -> ::std::option::Option<&str> {
self._extended_request_id.as_deref()
}
}
impl ChunkMetadata {
/// Creates a new builder-style object to manufacture [`ChunkMetadata`](crate::model::ChunkMetadata).
pub fn builder() -> crate::model::builders::ChunkMetadataBuilder {
crate::model::builders::ChunkMetadataBuilder::default()
}
}
/// A builder for [`ChunkMetadata`](crate::model::ChunkMetadata).
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default)]
#[non_exhaustive]
pub struct ChunkMetadataBuilder {
pub(crate) accept_ranges: ::std::option::Option<::std::string::String>,
pub(crate) bucket_key_enabled: ::std::option::Option<bool>,
pub(crate) cache_control: ::std::option::Option<::std::string::String>,
pub(crate) checksum_crc32: ::std::option::Option<::std::string::String>,
pub(crate) checksum_crc32_c: ::std::option::Option<::std::string::String>,
pub(crate) checksum_crc64_nvme: ::std::option::Option<::std::string::String>,
pub(crate) checksum_md5: ::std::option::Option<::std::string::String>,
pub(crate) checksum_sha1: ::std::option::Option<::std::string::String>,
pub(crate) checksum_sha256: ::std::option::Option<::std::string::String>,
pub(crate) checksum_sha512: ::std::option::Option<::std::string::String>,
pub(crate) checksum_type: ::std::option::Option<crate::model::ChecksumType>,
pub(crate) checksum_xxhash128: ::std::option::Option<::std::string::String>,
pub(crate) checksum_xxhash3: ::std::option::Option<::std::string::String>,
pub(crate) checksum_xxhash64: ::std::option::Option<::std::string::String>,
pub(crate) content_disposition: ::std::option::Option<::std::string::String>,
pub(crate) content_encoding: ::std::option::Option<::std::string::String>,
pub(crate) content_language: ::std::option::Option<::std::string::String>,
pub(crate) content_length: ::std::option::Option<i64>,
pub(crate) content_range: ::std::option::Option<::std::string::String>,
pub(crate) content_type: ::std::option::Option<::std::string::String>,
pub(crate) delete_marker: ::std::option::Option<bool>,
pub(crate) e_tag: ::std::option::Option<::std::string::String>,
pub(crate) expiration: ::std::option::Option<::std::string::String>,
pub(crate) last_modified: ::std::option::Option<::aws_smithy_types::DateTime>,
pub(crate) metadata: ::std::option::Option<
::std::collections::HashMap<::std::string::String, ::std::string::String>,
>,
pub(crate) missing_meta: ::std::option::Option<i32>,
pub(crate) object_lock_legal_hold_status:
::std::option::Option<crate::model::ObjectLockLegalHoldStatus>,
pub(crate) object_lock_mode: ::std::option::Option<crate::model::ObjectLockMode>,
pub(crate) object_lock_retain_until_date: ::std::option::Option<::aws_smithy_types::DateTime>,
pub(crate) parts_count: ::std::option::Option<i32>,
pub(crate) replication_status: ::std::option::Option<crate::model::ReplicationStatus>,
pub(crate) request_charged: ::std::option::Option<crate::model::RequestCharged>,
pub(crate) restore: ::std::option::Option<::std::string::String>,
pub(crate) sse_customer_algorithm: ::std::option::Option<::std::string::String>,
pub(crate) sse_customer_key_md5: ::std::option::Option<::std::string::String>,
pub(crate) ssekms_key_id: ::std::option::Option<::std::string::String>,
pub(crate) server_side_encryption: ::std::option::Option<crate::model::ServerSideEncryption>,
pub(crate) storage_class: ::std::option::Option<crate::model::StorageClass>,
pub(crate) tag_count: ::std::option::Option<i32>,
pub(crate) version_id: ::std::option::Option<::std::string::String>,
pub(crate) website_redirect_location: ::std::option::Option<::std::string::String>,
pub(crate) expires_string: ::std::option::Option<::std::string::String>,
pub(crate) _request_id: ::std::option::Option<::std::string::String>,
pub(crate) _extended_request_id: ::std::option::Option<::std::string::String>,
}
impl ChunkMetadataBuilder {
/// <p>Indicates that a range of bytes was specified in the request.</p>
pub fn accept_ranges(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.accept_ranges = ::std::option::Option::Some(input.into());
self
}
/// <p>Indicates that a range of bytes was specified in the request.</p>
pub fn set_accept_ranges(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.accept_ranges = input;
self
}
/// <p>Indicates that a range of bytes was specified in the request.</p>
pub fn get_accept_ranges(&self) -> &::std::option::Option<::std::string::String> {
&self.accept_ranges
}
/// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
pub fn bucket_key_enabled(mut self, input: bool) -> Self {
self.bucket_key_enabled = ::std::option::Option::Some(input);
self
}
/// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
pub fn set_bucket_key_enabled(mut self, input: ::std::option::Option<bool>) -> Self {
self.bucket_key_enabled = input;
self
}
/// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
pub fn get_bucket_key_enabled(&self) -> &::std::option::Option<bool> {
&self.bucket_key_enabled
}
/// <p>Specifies caching behavior along the request/reply chain.</p>
pub fn cache_control(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.cache_control = ::std::option::Option::Some(input.into());
self
}
/// <p>Specifies caching behavior along the request/reply chain.</p>
pub fn set_cache_control(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.cache_control = input;
self
}
/// <p>Specifies caching behavior along the request/reply chain.</p>
pub fn get_cache_control(&self) -> &::std::option::Option<::std::string::String> {
&self.cache_control
}
/// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_crc32(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_crc32 = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn set_checksum_crc32(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_crc32 = input;
self
}
/// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn get_checksum_crc32(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_crc32
}
/// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_crc32_c(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_crc32_c = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn set_checksum_crc32_c(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_crc32_c = input;
self
}
/// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn get_checksum_crc32_c(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_crc32_c
}
/// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_crc64_nvme(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_crc64_nvme = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn set_checksum_crc64_nvme(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_crc64_nvme = input;
self
}
/// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn get_checksum_crc64_nvme(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_crc64_nvme
}
/// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_md5(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.checksum_md5 = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn set_checksum_md5(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.checksum_md5 = input;
self
}
/// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn get_checksum_md5(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_md5
}
/// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_sha1(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_sha1 = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn set_checksum_sha1(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_sha1 = input;
self
}
/// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn get_checksum_sha1(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_sha1
}
/// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_sha256(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_sha256 = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn set_checksum_sha256(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_sha256 = input;
self
}
/// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn get_checksum_sha256(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_sha256
}
/// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_sha512(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_sha512 = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn set_checksum_sha512(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_sha512 = input;
self
}
/// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn get_checksum_sha512(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_sha512
}
/// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn checksum_type(mut self, input: crate::model::ChecksumType) -> Self {
self.checksum_type = ::std::option::Option::Some(input);
self
}
/// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn set_checksum_type(
mut self,
input: ::std::option::Option<crate::model::ChecksumType>,
) -> Self {
self.checksum_type = input;
self
}
/// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
pub fn get_checksum_type(&self) -> &::std::option::Option<crate::model::ChecksumType> {
&self.checksum_type
}
/// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_xxhash128(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_xxhash128 = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn set_checksum_xxhash128(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_xxhash128 = input;
self
}
/// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn get_checksum_xxhash128(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_xxhash128
}
/// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_xxhash3(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_xxhash3 = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn set_checksum_xxhash3(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_xxhash3 = input;
self
}
/// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn get_checksum_xxhash3(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_xxhash3
}
/// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn checksum_xxhash64(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.checksum_xxhash64 = ::std::option::Option::Some(input.into());
self
}
/// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn set_checksum_xxhash64(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.checksum_xxhash64 = input;
self
}
/// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
pub fn get_checksum_xxhash64(&self) -> &::std::option::Option<::std::string::String> {
&self.checksum_xxhash64
}
/// <p>Specifies presentational information for the object.</p>
pub fn content_disposition(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.content_disposition = ::std::option::Option::Some(input.into());
self
}
/// <p>Specifies presentational information for the object.</p>
pub fn set_content_disposition(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.content_disposition = input;
self
}
/// <p>Specifies presentational information for the object.</p>
pub fn get_content_disposition(&self) -> &::std::option::Option<::std::string::String> {
&self.content_disposition
}
/// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
pub fn content_encoding(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.content_encoding = ::std::option::Option::Some(input.into());
self
}
/// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
pub fn set_content_encoding(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.content_encoding = input;
self
}
/// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
pub fn get_content_encoding(&self) -> &::std::option::Option<::std::string::String> {
&self.content_encoding
}
/// <p>The language the content is in.</p>
pub fn content_language(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.content_language = ::std::option::Option::Some(input.into());
self
}
/// <p>The language the content is in.</p>
pub fn set_content_language(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.content_language = input;
self
}
/// <p>The language the content is in.</p>
pub fn get_content_language(&self) -> &::std::option::Option<::std::string::String> {
&self.content_language
}
/// <p>Size of the body in bytes.</p>
pub fn content_length(mut self, input: i64) -> Self {
self.content_length = ::std::option::Option::Some(input);
self
}
/// <p>Size of the body in bytes.</p>
pub fn set_content_length(mut self, input: ::std::option::Option<i64>) -> Self {
self.content_length = input;
self
}
/// <p>Size of the body in bytes.</p>
pub fn get_content_length(&self) -> &::std::option::Option<i64> {
&self.content_length
}
/// <p>The portion of the object returned in the response.</p>
pub fn content_range(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.content_range = ::std::option::Option::Some(input.into());
self
}
/// <p>The portion of the object returned in the response.</p>
pub fn set_content_range(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.content_range = input;
self
}
/// <p>The portion of the object returned in the response.</p>
pub fn get_content_range(&self) -> &::std::option::Option<::std::string::String> {
&self.content_range
}
/// <p>A standard MIME type describing the format of the object data.</p>
pub fn content_type(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.content_type = ::std::option::Option::Some(input.into());
self
}
/// <p>A standard MIME type describing the format of the object data.</p>
pub fn set_content_type(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.content_type = input;
self
}
/// <p>A standard MIME type describing the format of the object data.</p>
pub fn get_content_type(&self) -> &::std::option::Option<::std::string::String> {
&self.content_type
}
/// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
/// <ul>
/// <li>
/// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
/// <li>
/// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
/// </ul>
/// </note>
pub fn delete_marker(mut self, input: bool) -> Self {
self.delete_marker = ::std::option::Option::Some(input);
self
}
/// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
/// <ul>
/// <li>
/// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
/// <li>
/// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
/// </ul>
/// </note>
pub fn set_delete_marker(mut self, input: ::std::option::Option<bool>) -> Self {
self.delete_marker = input;
self
}
/// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
/// <ul>
/// <li>
/// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
/// <li>
/// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
/// </ul>
/// </note>
pub fn get_delete_marker(&self) -> &::std::option::Option<bool> {
&self.delete_marker
}
/// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
pub fn e_tag(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.e_tag = ::std::option::Option::Some(input.into());
self
}
/// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
pub fn set_e_tag(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.e_tag = input;
self
}
/// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
pub fn get_e_tag(&self) -> &::std::option::Option<::std::string::String> {
&self.e_tag
}
/// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
/// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
/// </note>
pub fn expiration(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.expiration = ::std::option::Option::Some(input.into());
self
}
/// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
/// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
/// </note>
pub fn set_expiration(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.expiration = input;
self
}
/// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
/// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
/// </note>
pub fn get_expiration(&self) -> &::std::option::Option<::std::string::String> {
&self.expiration
}
/// <p>Date and time when the object was last modified.</p>
/// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
pub fn last_modified(mut self, input: ::aws_smithy_types::DateTime) -> Self {
self.last_modified = ::std::option::Option::Some(input);
self
}
/// <p>Date and time when the object was last modified.</p>
/// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
pub fn set_last_modified(
mut self,
input: ::std::option::Option<::aws_smithy_types::DateTime>,
) -> Self {
self.last_modified = input;
self
}
/// <p>Date and time when the object was last modified.</p>
/// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
pub fn get_last_modified(&self) -> &::std::option::Option<::aws_smithy_types::DateTime> {
&self.last_modified
}
/// Adds a key-value pair to `metadata`.
///
/// To override the contents of this collection use [`set_metadata`](Self::set_metadata).
///
/// <p>A map of metadata to store with the object in S3.</p>
pub fn metadata(
mut self,
k: impl ::std::convert::Into<::std::string::String>,
v: impl ::std::convert::Into<::std::string::String>,
) -> Self {
let mut hash_map = self.metadata.unwrap_or_default();
hash_map.insert(k.into(), v.into());
self.metadata = ::std::option::Option::Some(hash_map);
self
}
/// <p>A map of metadata to store with the object in S3.</p>
pub fn set_metadata(
mut self,
input: ::std::option::Option<
::std::collections::HashMap<::std::string::String, ::std::string::String>,
>,
) -> Self {
self.metadata = input;
self
}
/// <p>A map of metadata to store with the object in S3.</p>
pub fn get_metadata(
&self,
) -> &::std::option::Option<
::std::collections::HashMap<::std::string::String, ::std::string::String>,
> {
&self.metadata
}
/// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn missing_meta(mut self, input: i32) -> Self {
self.missing_meta = ::std::option::Option::Some(input);
self
}
/// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_missing_meta(mut self, input: ::std::option::Option<i32>) -> Self {
self.missing_meta = input;
self
}
/// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_missing_meta(&self) -> &::std::option::Option<i32> {
&self.missing_meta
}
/// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn object_lock_legal_hold_status(
mut self,
input: crate::model::ObjectLockLegalHoldStatus,
) -> Self {
self.object_lock_legal_hold_status = ::std::option::Option::Some(input);
self
}
/// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_object_lock_legal_hold_status(
mut self,
input: ::std::option::Option<crate::model::ObjectLockLegalHoldStatus>,
) -> Self {
self.object_lock_legal_hold_status = input;
self
}
/// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_object_lock_legal_hold_status(
&self,
) -> &::std::option::Option<crate::model::ObjectLockLegalHoldStatus> {
&self.object_lock_legal_hold_status
}
/// <p>The Object Lock mode that's currently in place for this object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn object_lock_mode(mut self, input: crate::model::ObjectLockMode) -> Self {
self.object_lock_mode = ::std::option::Option::Some(input);
self
}
/// <p>The Object Lock mode that's currently in place for this object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_object_lock_mode(
mut self,
input: ::std::option::Option<crate::model::ObjectLockMode>,
) -> Self {
self.object_lock_mode = input;
self
}
/// <p>The Object Lock mode that's currently in place for this object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_object_lock_mode(&self) -> &::std::option::Option<crate::model::ObjectLockMode> {
&self.object_lock_mode
}
/// <p>The date and time when this object's Object Lock will expire.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn object_lock_retain_until_date(mut self, input: ::aws_smithy_types::DateTime) -> Self {
self.object_lock_retain_until_date = ::std::option::Option::Some(input);
self
}
/// <p>The date and time when this object's Object Lock will expire.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_object_lock_retain_until_date(
mut self,
input: ::std::option::Option<::aws_smithy_types::DateTime>,
) -> Self {
self.object_lock_retain_until_date = input;
self
}
/// <p>The date and time when this object's Object Lock will expire.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_object_lock_retain_until_date(
&self,
) -> &::std::option::Option<::aws_smithy_types::DateTime> {
&self.object_lock_retain_until_date
}
/// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
pub fn parts_count(mut self, input: i32) -> Self {
self.parts_count = ::std::option::Option::Some(input);
self
}
/// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
pub fn set_parts_count(mut self, input: ::std::option::Option<i32>) -> Self {
self.parts_count = input;
self
}
/// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
pub fn get_parts_count(&self) -> &::std::option::Option<i32> {
&self.parts_count
}
/// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn replication_status(mut self, input: crate::model::ReplicationStatus) -> Self {
self.replication_status = ::std::option::Option::Some(input);
self
}
/// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_replication_status(
mut self,
input: ::std::option::Option<crate::model::ReplicationStatus>,
) -> Self {
self.replication_status = input;
self
}
/// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_replication_status(
&self,
) -> &::std::option::Option<crate::model::ReplicationStatus> {
&self.replication_status
}
/// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn request_charged(mut self, input: crate::model::RequestCharged) -> Self {
self.request_charged = ::std::option::Option::Some(input);
self
}
/// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_request_charged(
mut self,
input: ::std::option::Option<crate::model::RequestCharged>,
) -> Self {
self.request_charged = input;
self
}
/// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_request_charged(&self) -> &::std::option::Option<crate::model::RequestCharged> {
&self.request_charged
}
/// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
/// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub fn restore(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.restore = ::std::option::Option::Some(input.into());
self
}
/// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
/// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub fn set_restore(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.restore = input;
self
}
/// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
/// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub fn get_restore(&self) -> &::std::option::Option<::std::string::String> {
&self.restore
}
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn sse_customer_algorithm(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.sse_customer_algorithm = ::std::option::Option::Some(input.into());
self
}
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_sse_customer_algorithm(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.sse_customer_algorithm = input;
self
}
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_sse_customer_algorithm(&self) -> &::std::option::Option<::std::string::String> {
&self.sse_customer_algorithm
}
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn sse_customer_key_md5(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.sse_customer_key_md5 = ::std::option::Option::Some(input.into());
self
}
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_sse_customer_key_md5(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.sse_customer_key_md5 = input;
self
}
/// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_sse_customer_key_md5(&self) -> &::std::option::Option<::std::string::String> {
&self.sse_customer_key_md5
}
/// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
pub fn ssekms_key_id(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.ssekms_key_id = ::std::option::Option::Some(input.into());
self
}
/// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
pub fn set_ssekms_key_id(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.ssekms_key_id = input;
self
}
/// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
pub fn get_ssekms_key_id(&self) -> &::std::option::Option<::std::string::String> {
&self.ssekms_key_id
}
/// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
/// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
/// </note>
pub fn server_side_encryption(mut self, input: crate::model::ServerSideEncryption) -> Self {
self.server_side_encryption = ::std::option::Option::Some(input);
self
}
/// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
/// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
/// </note>
pub fn set_server_side_encryption(
mut self,
input: ::std::option::Option<crate::model::ServerSideEncryption>,
) -> Self {
self.server_side_encryption = input;
self
}
/// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
/// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
/// </note>
pub fn get_server_side_encryption(
&self,
) -> &::std::option::Option<crate::model::ServerSideEncryption> {
&self.server_side_encryption
}
/// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
/// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub fn storage_class(mut self, input: crate::model::StorageClass) -> Self {
self.storage_class = ::std::option::Option::Some(input);
self
}
/// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
/// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub fn set_storage_class(
mut self,
input: ::std::option::Option<crate::model::StorageClass>,
) -> Self {
self.storage_class = input;
self
}
/// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
/// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
/// </note>
pub fn get_storage_class(&self) -> &::std::option::Option<crate::model::StorageClass> {
&self.storage_class
}
/// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
/// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn tag_count(mut self, input: i32) -> Self {
self.tag_count = ::std::option::Option::Some(input);
self
}
/// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
/// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_tag_count(mut self, input: ::std::option::Option<i32>) -> Self {
self.tag_count = input;
self
}
/// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
/// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_tag_count(&self) -> &::std::option::Option<i32> {
&self.tag_count
}
/// <p>Version ID of the object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn version_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.version_id = ::std::option::Option::Some(input.into());
self
}
/// <p>Version ID of the object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_version_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.version_id = input;
self
}
/// <p>Version ID of the object.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_version_id(&self) -> &::std::option::Option<::std::string::String> {
&self.version_id
}
/// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn website_redirect_location(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.website_redirect_location = ::std::option::Option::Some(input.into());
self
}
/// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn set_website_redirect_location(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.website_redirect_location = input;
self
}
/// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
/// <p>This functionality is not supported for directory buckets.</p>
/// </note>
pub fn get_website_redirect_location(&self) -> &::std::option::Option<::std::string::String> {
&self.website_redirect_location
}
/// <p>The date and time at which the object is no longer cacheable.</p>
pub fn expires_string(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self.expires_string = ::std::option::Option::Some(input.into());
self
}
/// <p>The date and time at which the object is no longer cacheable.</p>
pub fn set_expires_string(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self.expires_string = input;
self
}
/// <p>The date and time at which the object is no longer cacheable.</p>
pub fn get_expires_string(&self) -> &::std::option::Option<::std::string::String> {
&self.expires_string
}
/// S3 request ID.
#[allow(dead_code)]
pub(crate) fn request_id(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self._request_id = ::std::option::Option::Some(input.into());
self
}
/// S3 request ID.
#[allow(dead_code)]
pub(crate) fn set_request_id(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self._request_id = input;
self
}
/// S3 request ID.
#[allow(dead_code)]
pub(crate) fn get_request_id(&self) -> &::std::option::Option<::std::string::String> {
&self._request_id
}
/// S3 extended request ID.
#[allow(dead_code)]
pub(crate) fn extended_request_id(
mut self,
input: impl ::std::convert::Into<::std::string::String>,
) -> Self {
self._extended_request_id = ::std::option::Option::Some(input.into());
self
}
/// S3 extended request ID.
#[allow(dead_code)]
pub(crate) fn set_extended_request_id(
mut self,
input: ::std::option::Option<::std::string::String>,
) -> Self {
self._extended_request_id = input;
self
}
/// S3 extended request ID.
#[allow(dead_code)]
pub(crate) fn get_extended_request_id(&self) -> &::std::option::Option<::std::string::String> {
&self._extended_request_id
}
/// Consumes the builder and constructs a [`ChunkMetadata`](crate::model::ChunkMetadata).
pub fn build(self) -> crate::model::ChunkMetadata {
crate::model::ChunkMetadata {
accept_ranges: self.accept_ranges,
bucket_key_enabled: self.bucket_key_enabled,
cache_control: self.cache_control,
checksum_crc32: self.checksum_crc32,
checksum_crc32_c: self.checksum_crc32_c,
checksum_crc64_nvme: self.checksum_crc64_nvme,
checksum_md5: self.checksum_md5,
checksum_sha1: self.checksum_sha1,
checksum_sha256: self.checksum_sha256,
checksum_sha512: self.checksum_sha512,
checksum_type: self.checksum_type,
checksum_xxhash128: self.checksum_xxhash128,
checksum_xxhash3: self.checksum_xxhash3,
checksum_xxhash64: self.checksum_xxhash64,
content_disposition: self.content_disposition,
content_encoding: self.content_encoding,
content_language: self.content_language,
content_length: self.content_length,
content_range: self.content_range,
content_type: self.content_type,
delete_marker: self.delete_marker,
e_tag: self.e_tag,
expiration: self.expiration,
last_modified: self.last_modified,
metadata: self.metadata,
missing_meta: self.missing_meta,
object_lock_legal_hold_status: self.object_lock_legal_hold_status,
object_lock_mode: self.object_lock_mode,
object_lock_retain_until_date: self.object_lock_retain_until_date,
parts_count: self.parts_count,
replication_status: self.replication_status,
request_charged: self.request_charged,
restore: self.restore,
sse_customer_algorithm: self.sse_customer_algorithm,
sse_customer_key_md5: self.sse_customer_key_md5,
ssekms_key_id: self.ssekms_key_id,
server_side_encryption: self.server_side_encryption,
storage_class: self.storage_class,
tag_count: self.tag_count,
version_id: self.version_id,
website_redirect_location: self.website_redirect_location,
expires_string: self.expires_string,
_request_id: self._request_id,
_extended_request_id: self._extended_request_id,
}
}
}
impl ::std::fmt::Debug for ChunkMetadataBuilder {
fn fmt(&self, f: &mut ::std::fmt::Formatter<'_>) -> ::std::fmt::Result {
let mut formatter = f.debug_struct("ChunkMetadataBuilder");
formatter.field("accept_ranges", &self.accept_ranges);
formatter.field("bucket_key_enabled", &self.bucket_key_enabled);
formatter.field("cache_control", &self.cache_control);
formatter.field("checksum_crc32", &self.checksum_crc32);
formatter.field("checksum_crc32_c", &self.checksum_crc32_c);
formatter.field("checksum_crc64_nvme", &self.checksum_crc64_nvme);
formatter.field("checksum_md5", &self.checksum_md5);
formatter.field("checksum_sha1", &self.checksum_sha1);
formatter.field("checksum_sha256", &self.checksum_sha256);
formatter.field("checksum_sha512", &self.checksum_sha512);
formatter.field("checksum_type", &self.checksum_type);
formatter.field("checksum_xxhash128", &self.checksum_xxhash128);
formatter.field("checksum_xxhash3", &self.checksum_xxhash3);
formatter.field("checksum_xxhash64", &self.checksum_xxhash64);
formatter.field("content_disposition", &self.content_disposition);
formatter.field("content_encoding", &self.content_encoding);
formatter.field("content_language", &self.content_language);
formatter.field("content_length", &self.content_length);
formatter.field("content_range", &self.content_range);
formatter.field("content_type", &self.content_type);
formatter.field("delete_marker", &self.delete_marker);
formatter.field("e_tag", &self.e_tag);
formatter.field("expiration", &self.expiration);
formatter.field("last_modified", &self.last_modified);
formatter.field("metadata", &self.metadata);
formatter.field("missing_meta", &self.missing_meta);
formatter.field(
"object_lock_legal_hold_status",
&self.object_lock_legal_hold_status,
);
formatter.field("object_lock_mode", &self.object_lock_mode);
formatter.field(
"object_lock_retain_until_date",
&self.object_lock_retain_until_date,
);
formatter.field("parts_count", &self.parts_count);
formatter.field("replication_status", &self.replication_status);
formatter.field("request_charged", &self.request_charged);
formatter.field("restore", &self.restore);
formatter.field("sse_customer_algorithm", &self.sse_customer_algorithm);
formatter.field("sse_customer_key_md5", &self.sse_customer_key_md5);
formatter.field("ssekms_key_id", &"*** Sensitive Data Redacted ***");
formatter.field("server_side_encryption", &self.server_side_encryption);
formatter.field("storage_class", &self.storage_class);
formatter.field("tag_count", &self.tag_count);
formatter.field("version_id", &self.version_id);
formatter.field("website_redirect_location", &self.website_redirect_location);
formatter.field("expires_string", &self.expires_string);
formatter.field("_request_id", &self._request_id);
formatter.field("_extended_request_id", &self._extended_request_id);
formatter.finish()
}
}