#[doc = "Register `TCCR1A` reader"]
pub struct R(crate::R<TCCR1A_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<TCCR1A_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::convert::From<crate::R<TCCR1A_SPEC>> for R {
fn from(reader: crate::R<TCCR1A_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `TCCR1A` writer"]
pub struct W(crate::W<TCCR1A_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<TCCR1A_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl core::convert::From<crate::W<TCCR1A_SPEC>> for W {
fn from(writer: crate::W<TCCR1A_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `WGM1` reader - Pulse Width Modulator Select Bits"]
pub struct WGM1_R(crate::FieldReader<u8, u8>);
impl WGM1_R {
pub(crate) fn new(bits: u8) -> Self {
WGM1_R(crate::FieldReader::new(bits))
}
}
impl core::ops::Deref for WGM1_R {
type Target = crate::FieldReader<u8, u8>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
#[doc = "Field `WGM1` writer - Pulse Width Modulator Select Bits"]
pub struct WGM1_W<'a> {
w: &'a mut W,
}
impl<'a> WGM1_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !0x03) | ((value as u8) & 0x03);
self.w
}
}
#[doc = "Compare Output Mode 1B, bits\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum COM1B_A {
#[doc = "0: Normal port operation, OCix disconnected"]
DISCONNECTED = 0,
#[doc = "1: Toggle OCix on Compare Match (Might depend on WGM)"]
MATCH_TOGGLE = 1,
#[doc = "2: Clear OCix on Compare Match (If PWM is enabled, OCix is set at BOTTOM)"]
MATCH_CLEAR = 2,
#[doc = "3: Set OCix on Compare Match (If PWM is enabled, OCix is cleared at BOTTOM)"]
MATCH_SET = 3,
}
impl From<COM1B_A> for u8 {
#[inline(always)]
fn from(variant: COM1B_A) -> Self {
variant as _
}
}
#[doc = "Field `COM1B` reader - Compare Output Mode 1B, bits"]
pub struct COM1B_R(crate::FieldReader<u8, COM1B_A>);
impl COM1B_R {
pub(crate) fn new(bits: u8) -> Self {
COM1B_R(crate::FieldReader::new(bits))
}
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> COM1B_A {
match self.bits {
0 => COM1B_A::DISCONNECTED,
1 => COM1B_A::MATCH_TOGGLE,
2 => COM1B_A::MATCH_CLEAR,
3 => COM1B_A::MATCH_SET,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISCONNECTED`"]
#[inline(always)]
pub fn is_disconnected(&self) -> bool {
**self == COM1B_A::DISCONNECTED
}
#[doc = "Checks if the value of the field is `MATCH_TOGGLE`"]
#[inline(always)]
pub fn is_match_toggle(&self) -> bool {
**self == COM1B_A::MATCH_TOGGLE
}
#[doc = "Checks if the value of the field is `MATCH_CLEAR`"]
#[inline(always)]
pub fn is_match_clear(&self) -> bool {
**self == COM1B_A::MATCH_CLEAR
}
#[doc = "Checks if the value of the field is `MATCH_SET`"]
#[inline(always)]
pub fn is_match_set(&self) -> bool {
**self == COM1B_A::MATCH_SET
}
}
impl core::ops::Deref for COM1B_R {
type Target = crate::FieldReader<u8, COM1B_A>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
#[doc = "Field `COM1B` writer - Compare Output Mode 1B, bits"]
pub struct COM1B_W<'a> {
w: &'a mut W,
}
impl<'a> COM1B_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: COM1B_A) -> &'a mut W {
self.bits(variant.into())
}
#[doc = "Normal port operation, OCix disconnected"]
#[inline(always)]
pub fn disconnected(self) -> &'a mut W {
self.variant(COM1B_A::DISCONNECTED)
}
#[doc = "Toggle OCix on Compare Match (Might depend on WGM)"]
#[inline(always)]
pub fn match_toggle(self) -> &'a mut W {
self.variant(COM1B_A::MATCH_TOGGLE)
}
#[doc = "Clear OCix on Compare Match (If PWM is enabled, OCix is set at BOTTOM)"]
#[inline(always)]
pub fn match_clear(self) -> &'a mut W {
self.variant(COM1B_A::MATCH_CLEAR)
}
#[doc = "Set OCix on Compare Match (If PWM is enabled, OCix is cleared at BOTTOM)"]
#[inline(always)]
pub fn match_set(self) -> &'a mut W {
self.variant(COM1B_A::MATCH_SET)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x03 << 4)) | (((value as u8) & 0x03) << 4);
self.w
}
}
#[doc = "Compare Output Mode 1A, bits"]
pub type COM1A_A = COM1B_A;
#[doc = "Field `COM1A` reader - Compare Output Mode 1A, bits"]
pub type COM1A_R = COM1B_R;
#[doc = "Field `COM1A` writer - Compare Output Mode 1A, bits"]
pub struct COM1A_W<'a> {
w: &'a mut W,
}
impl<'a> COM1A_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: COM1A_A) -> &'a mut W {
self.bits(variant.into())
}
#[doc = "Normal port operation, OCix disconnected"]
#[inline(always)]
pub fn disconnected(self) -> &'a mut W {
self.variant(COM1A_A::DISCONNECTED)
}
#[doc = "Toggle OCix on Compare Match (Might depend on WGM)"]
#[inline(always)]
pub fn match_toggle(self) -> &'a mut W {
self.variant(COM1A_A::MATCH_TOGGLE)
}
#[doc = "Clear OCix on Compare Match (If PWM is enabled, OCix is set at BOTTOM)"]
#[inline(always)]
pub fn match_clear(self) -> &'a mut W {
self.variant(COM1A_A::MATCH_CLEAR)
}
#[doc = "Set OCix on Compare Match (If PWM is enabled, OCix is cleared at BOTTOM)"]
#[inline(always)]
pub fn match_set(self) -> &'a mut W {
self.variant(COM1A_A::MATCH_SET)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x03 << 6)) | (((value as u8) & 0x03) << 6);
self.w
}
}
impl R {
#[doc = "Bits 0:1 - Pulse Width Modulator Select Bits"]
#[inline(always)]
pub fn wgm1(&self) -> WGM1_R {
WGM1_R::new((self.bits & 0x03) as u8)
}
#[doc = "Bits 4:5 - Compare Output Mode 1B, bits"]
#[inline(always)]
pub fn com1b(&self) -> COM1B_R {
COM1B_R::new(((self.bits >> 4) & 0x03) as u8)
}
#[doc = "Bits 6:7 - Compare Output Mode 1A, bits"]
#[inline(always)]
pub fn com1a(&self) -> COM1A_R {
COM1A_R::new(((self.bits >> 6) & 0x03) as u8)
}
}
impl W {
#[doc = "Bits 0:1 - Pulse Width Modulator Select Bits"]
#[inline(always)]
pub fn wgm1(&mut self) -> WGM1_W {
WGM1_W { w: self }
}
#[doc = "Bits 4:5 - Compare Output Mode 1B, bits"]
#[inline(always)]
pub fn com1b(&mut self) -> COM1B_W {
COM1B_W { w: self }
}
#[doc = "Bits 6:7 - Compare Output Mode 1A, bits"]
#[inline(always)]
pub fn com1a(&mut self) -> COM1A_W {
COM1A_W { w: self }
}
#[doc = "Writes raw bits to the register."]
pub unsafe fn bits(&mut self, bits: u8) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "Timer/Counter1 Control Register A\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [tccr1a](index.html) module"]
pub struct TCCR1A_SPEC;
impl crate::RegisterSpec for TCCR1A_SPEC {
type Ux = u8;
}
#[doc = "`read()` method returns [tccr1a::R](R) reader structure"]
impl crate::Readable for TCCR1A_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [tccr1a::W](W) writer structure"]
impl crate::Writable for TCCR1A_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets TCCR1A to value 0"]
impl crate::Resettable for TCCR1A_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}