#[doc = r"Enumeration of all the interrupts"]
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum Interrupt {
#[doc = "0 - External Pin,Power-on Reset,Brown-out Reset,Watchdog Reset,and JTAG AVR Reset. See Datasheet."]
RESET = 0,
#[doc = "1 - External Interrupt Request 0"]
INT0 = 1,
#[doc = "2 - External Interrupt Request 1"]
INT1 = 2,
#[doc = "3 - External Interrupt Request 2"]
INT2 = 3,
#[doc = "4 - External Interrupt Request 3"]
INT3 = 4,
#[doc = "5 - Reserved1"]
RESERVED1 = 5,
#[doc = "6 - Reserved2"]
RESERVED2 = 6,
#[doc = "7 - External Interrupt Request 6"]
INT6 = 7,
#[doc = "8 - Reserved3"]
RESERVED3 = 8,
#[doc = "9 - Pin Change Interrupt Request 0"]
PCINT0 = 9,
#[doc = "10 - USB General Interrupt Request"]
USB_GEN = 10,
#[doc = "11 - USB Endpoint/Pipe Interrupt Communication Request"]
USB_COM = 11,
#[doc = "12 - Watchdog Time-out Interrupt"]
WDT = 12,
#[doc = "13 - Reserved4"]
RESERVED4 = 13,
#[doc = "14 - Reserved5"]
RESERVED5 = 14,
#[doc = "15 - Reserved6"]
RESERVED6 = 15,
#[doc = "16 - Timer/Counter1 Capture Event"]
TIMER1_CAPT = 16,
#[doc = "17 - Timer/Counter1 Compare Match A"]
TIMER1_COMPA = 17,
#[doc = "18 - Timer/Counter1 Compare Match B"]
TIMER1_COMPB = 18,
#[doc = "19 - Timer/Counter1 Compare Match C"]
TIMER1_COMPC = 19,
#[doc = "20 - Timer/Counter1 Overflow"]
TIMER1_OVF = 20,
#[doc = "21 - Timer/Counter0 Compare Match A"]
TIMER0_COMPA = 21,
#[doc = "22 - Timer/Counter0 Compare Match B"]
TIMER0_COMPB = 22,
#[doc = "23 - Timer/Counter0 Overflow"]
TIMER0_OVF = 23,
#[doc = "24 - SPI Serial Transfer Complete"]
SPI_STC = 24,
#[doc = "25 - USART1, Rx Complete"]
USART1_RX = 25,
#[doc = "26 - USART1 Data register Empty"]
USART1_UDRE = 26,
#[doc = "27 - USART1, Tx Complete"]
USART1_TX = 27,
#[doc = "28 - Analog Comparator"]
ANALOG_COMP = 28,
#[doc = "29 - ADC Conversion Complete"]
ADC = 29,
#[doc = "30 - EEPROM Ready"]
EE_READY = 30,
#[doc = "31 - Timer/Counter3 Capture Event"]
TIMER3_CAPT = 31,
#[doc = "32 - Timer/Counter3 Compare Match A"]
TIMER3_COMPA = 32,
#[doc = "33 - Timer/Counter3 Compare Match B"]
TIMER3_COMPB = 33,
#[doc = "34 - Timer/Counter3 Compare Match C"]
TIMER3_COMPC = 34,
#[doc = "35 - Timer/Counter3 Overflow"]
TIMER3_OVF = 35,
#[doc = "36 - 2-wire Serial Interface"]
TWI = 36,
#[doc = "37 - Store Program Memory Read"]
SPM_READY = 37,
#[doc = "38 - Timer/Counter4 Compare Match A"]
TIMER4_COMPA = 38,
#[doc = "39 - Timer/Counter4 Compare Match B"]
TIMER4_COMPB = 39,
#[doc = "40 - Timer/Counter4 Compare Match D"]
TIMER4_COMPD = 40,
#[doc = "41 - Timer/Counter4 Overflow"]
TIMER4_OVF = 41,
#[doc = "42 - Timer/Counter4 Fault Protection Interrupt"]
TIMER4_FPF = 42,
}
unsafe impl bare_metal::Nr for Interrupt {
#[inline(always)]
fn nr(&self) -> u8 {
*self as u8
}
}
#[derive(Debug, Copy, Clone)]
pub struct TryFromInterruptError(());
impl Interrupt {
#[inline]
pub fn try_from(value: u8) -> Result<Self, TryFromInterruptError> {
match value {
0 => Ok(Interrupt::RESET),
1 => Ok(Interrupt::INT0),
2 => Ok(Interrupt::INT1),
3 => Ok(Interrupt::INT2),
4 => Ok(Interrupt::INT3),
5 => Ok(Interrupt::RESERVED1),
6 => Ok(Interrupt::RESERVED2),
7 => Ok(Interrupt::INT6),
8 => Ok(Interrupt::RESERVED3),
9 => Ok(Interrupt::PCINT0),
10 => Ok(Interrupt::USB_GEN),
11 => Ok(Interrupt::USB_COM),
12 => Ok(Interrupt::WDT),
13 => Ok(Interrupt::RESERVED4),
14 => Ok(Interrupt::RESERVED5),
15 => Ok(Interrupt::RESERVED6),
16 => Ok(Interrupt::TIMER1_CAPT),
17 => Ok(Interrupt::TIMER1_COMPA),
18 => Ok(Interrupt::TIMER1_COMPB),
19 => Ok(Interrupt::TIMER1_COMPC),
20 => Ok(Interrupt::TIMER1_OVF),
21 => Ok(Interrupt::TIMER0_COMPA),
22 => Ok(Interrupt::TIMER0_COMPB),
23 => Ok(Interrupt::TIMER0_OVF),
24 => Ok(Interrupt::SPI_STC),
25 => Ok(Interrupt::USART1_RX),
26 => Ok(Interrupt::USART1_UDRE),
27 => Ok(Interrupt::USART1_TX),
28 => Ok(Interrupt::ANALOG_COMP),
29 => Ok(Interrupt::ADC),
30 => Ok(Interrupt::EE_READY),
31 => Ok(Interrupt::TIMER3_CAPT),
32 => Ok(Interrupt::TIMER3_COMPA),
33 => Ok(Interrupt::TIMER3_COMPB),
34 => Ok(Interrupt::TIMER3_COMPC),
35 => Ok(Interrupt::TIMER3_OVF),
36 => Ok(Interrupt::TWI),
37 => Ok(Interrupt::SPM_READY),
38 => Ok(Interrupt::TIMER4_COMPA),
39 => Ok(Interrupt::TIMER4_COMPB),
40 => Ok(Interrupt::TIMER4_COMPD),
41 => Ok(Interrupt::TIMER4_OVF),
42 => Ok(Interrupt::TIMER4_FPF),
_ => Err(TryFromInterruptError(())),
}
}
}