auralis_task/

executor.rs

//! Single-threaded executor with priority scheduling, time-budget
//! awareness, and deferred-signal support.
//!
//! ## Architecture
//!
//! The executor is stored via a pluggable [`ExecutorStorage`] strategy
//! (defaulting to a per-thread slot).  Before polling a task the future
//! is **temporarily removed** so that the poll never holds an executor
//! borrow — this allows nested spawns, wakes, and `set_deferred` calls
//! without `RefCell` panics.
//!
//! The waker carries only a `task_id: u64`, making it trivially
//! [`Send`] + [`Sync`] for [`Waker::from`].

#![allow(clippy::cast_possible_truncation)]

use std::cell::{Cell, RefCell};
use std::collections::{BTreeMap, VecDeque};
use std::future::Future;
use std::pin::Pin;
use std::rc::{Rc, Weak};
use std::sync::Arc;
use std::task::{Context, Poll, Wake, Waker};

use auralis_signal::Signal;

use crate::Priority;

// ---------------------------------------------------------------------------
// Types
// ---------------------------------------------------------------------------

type TaskId = u64;

// ---------------------------------------------------------------------------
// ScheduleFlush
// ---------------------------------------------------------------------------

/// Platform hook for scheduling a microtask callback.
pub trait ScheduleFlush {
    /// Request that `callback` runs at the next microtask boundary.
    fn schedule(&self, callback: Box<dyn FnOnce()>);
}

/// A [`ScheduleFlush`] that fires the callback synchronously.
///
/// Makes the executor run-to-completion in unit tests without a browser
/// event loop.
#[cfg(test)]
pub struct TestScheduleFlush;

#[cfg(test)]
impl ScheduleFlush for TestScheduleFlush {
    fn schedule(&self, callback: Box<dyn FnOnce()>) {
        callback();
    }
}

// ---------------------------------------------------------------------------
// TimeSource
// ---------------------------------------------------------------------------

/// High-resolution time source for the executor's time-budget
/// accounting.
///
/// When registered via [`init_time_source`], the executor queries this
/// before and after each task poll to decide whether it should yield
/// control back to the host event loop (default budget: 8 ms).
///
/// In Wasm environments the implementation typically delegates to
/// `performance.now()`.  If no [`TimeSource`] is registered the time
/// budget check is a no-op and the executor runs tasks until the
/// queues are drained.
pub trait TimeSource {
    /// Return the current time in milliseconds.
    fn now_ms(&self) -> u64;
}

/// A [`TimeSource`] whose value is explicitly controlled by the test.
///
/// Use [`set`](TestTimeSource::set) or [`advance`](TestTimeSource::advance)
/// to simulate the passage of time during a flush cycle.
#[cfg(test)]
pub struct TestTimeSource {
    now: std::cell::Cell<u64>,
}

#[cfg(test)]
impl TestTimeSource {
    /// Create a new [`TestTimeSource`] with the given initial time.
    #[must_use]
    pub fn new(initial_ms: u64) -> Self {
        Self {
            now: std::cell::Cell::new(initial_ms),
        }
    }

    /// Set the current time to `ms` milliseconds.
    pub fn set(&self, ms: u64) {
        self.now.set(ms);
    }

    /// Advance the current time by `ms` milliseconds.
    pub fn advance(&self, ms: u64) {
        self.now.set(self.now.get() + ms);
    }
}

#[cfg(test)]
impl TimeSource for TestTimeSource {
    fn now_ms(&self) -> u64 {
        self.now.get()
    }
}

// ---------------------------------------------------------------------------
// TaskWaker — routes wakes to the correct executor via a slot table.
//
// Waker::from requires Send + Sync + 'static, so the waker cannot hold
// an Rc<RefCell<Executor>>.  Instead it stores a slot index + generation
// number.  The SLOTS thread_local maps (index, generation) → Weak<Executor>.
// On wake, the generation is validated before the weak pointer is upgraded.
// Dead slots are reclaimed when new executors are registered.
// ---------------------------------------------------------------------------

/// A registered executor slot.  The `generation` counter distinguishes
/// between successive executors that occupy the same slot index (e.g.
/// after the previous one was dropped and a new one recycles the slot).
struct Slot {
    weak: Weak<RefCell<Executor>>,
    /// Incremented (wrapping) every time this slot is reused.
    /// A [`TaskWaker`] must present the generation it was created with;
    /// a mismatch means the waker is stale and is silently ignored.
    generation: u64,
}

thread_local! {
    /// Slot 0 is reserved for the global executor.  Instance executors
    /// occupy subsequent slots.  Dead slots (Weak::upgrade returns None)
    /// are recycled in [`register_executor`].
    static SLOTS: RefCell<Vec<Slot>> = const { RefCell::new(Vec::new()) };
}

/// Register an executor in the slot table, returning the assigned
/// (`slot_id`, `generation`) pair.  Dead slots are recycled in-place;
/// if no dead slot is found a new entry is appended.
fn register_executor(weak: Weak<RefCell<Executor>>) -> (u64, u64) {
    SLOTS.with(|slots| {
        let mut slots = slots.borrow_mut();
        for (i, slot) in slots.iter_mut().enumerate() {
            if slot.weak.upgrade().is_none() {
                slot.weak = weak;
                // Wrapping is safe: 2^64 reuses of a single slot
                // would take ~10^14 years at 1 reuse/μs.
                slot.generation = slot.generation.wrapping_add(1);
                return (i as u64, slot.generation);
            }
        }
        let gen = 0;
        slots.push(Slot {
            weak,
            generation: gen,
        });
        ((slots.len() - 1) as u64, gen)
    })
}

/// Look up an executor by slot id, validating the generation.
fn lookup_executor(slot_id: u64, generation: u64) -> Option<Rc<RefCell<Executor>>> {
    SLOTS.with(|slots| {
        let slots = slots.borrow();
        let slot = slots.get(slot_id as usize)?;
        if slot.generation != generation {
            return None;
        }
        slot.weak.upgrade()
    })
}

struct TaskWaker {
    task_id: TaskId,
    priority: Priority,
    slot_id: u64,
    generation: u64,
}

impl Wake for TaskWaker {
    fn wake(self: Arc<Self>) {
        let Some(exec) = lookup_executor(self.slot_id, self.generation) else {
            return;
        };
        let maybe_sched = if let Ok(mut ex) = exec.try_borrow_mut() {
            match self.priority {
                Priority::High => ex.high_queue.push_back(self.task_id),
                Priority::Low => ex.low_queue.push_back(self.task_id),
            }
            if ex.in_flush {
                None
            } else {
                ex.try_schedule_flush()
            }
        } else {
            PENDING_WAKES.with(|pw| {
                pw.borrow_mut()
                    .push((self.task_id, self.slot_id, self.generation));
            });
            None
        };
        if let Some(sched) = maybe_sched {
            let sid = self.slot_id;
            let gen = self.generation;
            sched.schedule(Box::new(move || {
                if let Some(ex) = lookup_executor(sid, gen) {
                    Executor::flush_instance(&ex);
                }
            }));
        }
    }
}

// ---------------------------------------------------------------------------
// TaskState
// ---------------------------------------------------------------------------

struct TaskState {
    future: Pin<Box<dyn Future<Output = ()> + 'static>>,
    priority: Priority,
    scope_id: u64,
    /// Key in [`Executor::timers`] for this task's pending sleep,
    /// or 0 if the task is not waiting on a timer.
    timer_deadline: u64,
    /// Number of times this task has been polled.
    total_poll_count: u64,
    /// Microseconds spent in the most recent poll.
    last_poll_duration_us: u64,
}

// ---------------------------------------------------------------------------
// Executor
// ---------------------------------------------------------------------------

/// Information about a task panic, passed to the user-registered
/// [`set_panic_hook`].
#[derive(Debug)]
pub struct PanicInfo {
    /// The executor-assigned task id.
    pub task_id: u64,
    /// The scope that owned the task (0 for global tasks).
    pub scope_id: u64,
    /// The boxed panic payload.
    pub payload: Box<dyn std::any::Any + Send>,
}

/// A single-threaded async task executor with priority queues.
///
/// Each [`Executor`] manages its own task slots, ready queues, and
/// deferred callback buffers.  Use [`Executor::new_instance`] to create
/// an isolated executor (e.g. per SSR request), or use the global
/// thread-local executor via [`spawn_global`](crate::spawn_global).
pub struct Executor {
    high_queue: VecDeque<TaskId>,
    low_queue: VecDeque<TaskId>,
    tasks: Vec<Option<TaskState>>,
    free_slots: Vec<TaskId>,
    next_task_id: TaskId,
    is_flush_scheduled: bool,
    in_flush: bool,
    deferred_ops: Vec<DeferredOp>,
    /// Callbacks pushed by `Signal::set` via the schedule hook.
    /// Drained at the start of every flush before polling tasks.
    ///
    /// Unbounded by design — in a single-threaded Wasm context, a tight
    /// loop of signal sets will block the UI thread anyway, so adding a
    /// capacity limit wouldn't improve the situation.  SSR / multi-tenant
    /// users should ensure that application code doesn't produce
    /// unbounded signal churn within a single request.
    deferred_callbacks: Vec<Box<dyn FnOnce()>>,
    flush_scheduler: Option<Rc<dyn ScheduleFlush>>,
    time_source: Option<Rc<dyn TimeSource>>,
    /// Maximum milliseconds to spend inside a single flush before
    /// yielding back to the host event loop.  Default: 8 ms.
    time_budget_ms: u64,
    /// Optional cap on the number of deferred signal callbacks that can
    /// accumulate between two flushes.  Exceeding this limit triggers a
    /// panic — useful as a safety net in SSR / multi-tenant deployments
    /// where a runaway signal loop could OOM the process.
    ///
    /// Default: `None` (no limit).
    max_deferred_callbacks: Option<usize>,
    /// Optional hook invoked when a spawned task panics.
    panic_hook: Option<Rc<dyn Fn(PanicInfo)>>,
    /// Timer queue: map from deadline (ms) to task ids that should be
    /// woken when that deadline expires.  Processed at the start of
    /// every flush.
    timers: BTreeMap<u64, Vec<TaskId>>,
    /// Slot index and generation in [`SLOTS`] for routing wakes back
    /// to this executor.  Set by [`new_instance`] or lazily for the
    /// global executor.
    slot_id: u64,
    generation: u64,
    /// Whether this executor has been registered in [`SLOTS`].
    registered: bool,
}

// Set by the executor before polling a task, cleared afterward.
// Lets futures discover their task id without threading it through
// layers of combinators.
thread_local! {
    static CURRENT_POLLING_TASK: Cell<Option<TaskId>> = const { Cell::new(None) };
}

pub(crate) fn with_current_polling_task<R>(f: impl FnOnce(Option<TaskId>) -> R) -> R {
    CURRENT_POLLING_TASK.with(|c| f(c.get()))
}

struct DeferredOp {
    f: Box<dyn FnOnce()>,
}

impl Executor {
    fn new() -> Self {
        Self {
            high_queue: VecDeque::new(),
            low_queue: VecDeque::new(),
            tasks: Vec::new(),
            free_slots: Vec::new(),
            next_task_id: 0,
            is_flush_scheduled: false,
            in_flush: false,
            deferred_ops: Vec::new(),
            deferred_callbacks: Vec::new(),
            flush_scheduler: None,
            time_source: None,
            time_budget_ms: 8,
            max_deferred_callbacks: None,
            panic_hook: None,
            timers: BTreeMap::new(),
            slot_id: 0,
            generation: 0,
            registered: false,
        }
    }

    fn allocate_id(&mut self) -> TaskId {
        if let Some(id) = self.free_slots.pop() {
            return id;
        }
        let id = self.next_task_id;
        self.next_task_id += 1;
        self.tasks.push(None);
        id
    }

    /// Release a task slot back to the free list.
    ///
    /// **Caller must ensure** that `task_id` has not already been freed
    /// (e.g. via [`cancel_task`] or [`cancel_scope_tasks_on`]).  This
    /// method unconditionally pushes to `free_slots` — pushing the same
    /// id twice would cause [`allocate_id`] to hand it out twice.
    fn free_slot(&mut self, task_id: TaskId) {
        // Clean up any pending timer for this task so a recycled
        // task ID is not spuriously woken by an old deadline.
        // This works when the slot is still occupied (scope cancel
        // path).  For normal completion (Poll::Ready), the slot is
        // already None and the caller must call cleanup_timer first.
        if let Some(Some(ref t)) = self.tasks.get(task_id as usize) {
            if t.timer_deadline != 0 {
                self.cleanup_timer(task_id, t.timer_deadline);
            }
        }
        self.tasks[task_id as usize] = None;
        self.free_slots.push(task_id);
    }

    /// Remove a timer entry for `task_id` from the timer map.
    fn cleanup_timer(&mut self, task_id: TaskId, deadline: u64) {
        if let Some(tids) = self.timers.get_mut(&deadline) {
            tids.retain(|id| *id != task_id);
            if tids.is_empty() {
                self.timers.remove(&deadline);
            }
        }
    }

    fn enqueue(&mut self, task_id: TaskId) {
        let priority = match self.tasks.get(task_id as usize).and_then(Option::as_ref) {
            Some(t) => t.priority,
            None => return,
        };
        match priority {
            Priority::High => self.high_queue.push_back(task_id),
            Priority::Low => self.low_queue.push_back(task_id),
        }
    }

    fn dequeue(&mut self) -> Option<TaskId> {
        self.high_queue
            .pop_front()
            .or_else(|| self.low_queue.pop_front())
    }

    /// Mark that a flush is needed and return the scheduler if one is
    /// registered.  The caller **must** invoke the scheduler **after**
    /// releasing the executor borrow.
    fn try_schedule_flush(&mut self) -> Option<Rc<dyn ScheduleFlush>> {
        if self.is_flush_scheduled {
            return None;
        }
        self.is_flush_scheduled = true;
        self.flush_scheduler.clone()
    }

    /// Return the current time in ms, or 0 if no [`TimeSource`] is
    /// registered.  When this returns 0 the time-budget check is
    /// effectively a no-op.
    pub(crate) fn now_ms(&self) -> u64 {
        self.time_source.as_ref().map_or(0, |ts| ts.now_ms())
    }

    /// Return the number of currently active (not-yet-completed) tasks.
    ///
    /// Used by streaming SSR to determine whether the stream should
    /// wait for more work or terminate.
    #[must_use]
    pub fn active_task_count(&self) -> usize {
        self.tasks.iter().filter(|t| t.is_some()).count()
    }
}

// ---------------------------------------------------------------------------
// Thread-local globals (default storage)
// ---------------------------------------------------------------------------

thread_local! {
    static EXECUTOR: Rc<RefCell<Executor>> = Rc::new(RefCell::new(Executor::new()));
    static PENDING_WAKES: RefCell<Vec<(TaskId, u64, u64)>> =
        const { RefCell::new(Vec::new()) };
}

/// Ensure the global executor is registered in slot 0 (lazy, idempotent).
/// Returns (`slot_id`, `generation`) for the global executor.
fn ensure_global_registered() -> (u64, u64) {
    SLOTS.with(|slots| {
        let mut slots = slots.borrow_mut();
        if slots.is_empty() {
            let weak = EXECUTOR.with(Rc::downgrade);
            slots.push(Slot {
                weak,
                generation: 0,
            });
        } else {
            // Verify slot 0 still holds the global executor.
            let global = EXECUTOR.with(Rc::clone);
            let is_global = slots[0]
                .weak
                .upgrade()
                .is_some_and(|ex| Rc::ptr_eq(&ex, &global));
            if !is_global {
                slots[0] = Slot {
                    weak: Rc::downgrade(&global),
                    generation: slots[0].generation.wrapping_add(1),
                };
            }
        }
        // Mark the global executor as registered so flush_instance
        // doesn't call this function again on every flush.
        EXECUTOR.with(|ex| {
            let mut e = ex.borrow_mut();
            e.slot_id = 0;
            e.generation = slots[0].generation;
            e.registered = true;
        });
        let gen = slots[0].generation;
        (0, gen)
    })
}

// ---------------------------------------------------------------------------
// Executor instance methods (for isolated executors, e.g. SSR)
// ---------------------------------------------------------------------------

impl Executor {
    /// Create a new isolated executor, wrapped for shared access.
    ///
    /// The returned executor is independent of the global thread-local
    /// executor.  Use [`with_executor`] to make it the current executor
    /// for the duration of a closure, so that spawned tasks and signal
    /// callbacks are routed to it.
    #[must_use]
    pub fn new_instance() -> Rc<RefCell<Executor>> {
        let ex = Rc::new(RefCell::new(Executor::new()));
        // Register in the slot table so TaskWaker can find this executor.
        let (slot_id, generation) = register_executor(Rc::downgrade(&ex));
        {
            let mut e = ex.borrow_mut();
            e.slot_id = slot_id;
            e.generation = generation;
            e.registered = true;
        }
        ex
    }

    /// Install a flush scheduler on this executor instance.
    pub fn install_flush_scheduler(ex: &Rc<RefCell<Executor>>, sched: Rc<dyn ScheduleFlush>) {
        ex.borrow_mut().flush_scheduler = Some(sched);
    }

    /// Install a time source on this executor instance.
    pub fn install_time_source(ex: &Rc<RefCell<Executor>>, ts: Rc<dyn TimeSource>) {
        ex.borrow_mut().time_source = Some(ts);
    }

    /// Set the maximum time (in milliseconds) a single flush may spend
    /// before yielding back to the host event loop.
    ///
    /// The default is 8 ms (~120 fps frame budget, leaving time for the
    /// browser to render between flushes).  Set to `u64::MAX` to disable
    /// time-budget yielding (flush runs to completion).
    ///
    /// # Semantics
    ///
    /// The budget is checked **between** task polls — the currently
    /// executing task is never interrupted.  When the budget is exhausted
    /// the executor sets `in_flush = false` and schedules a follow-up
    /// flush so the remaining ready tasks will be polled on the next
    /// microtask tick.  This is cooperative (`.await`-bound) yielding,
    /// not preemptive.
    ///
    /// This affects **this executor only**.  For the global thread-local
    /// executor use [`set_global_time_budget`].
    pub fn set_time_budget(ex: &Rc<RefCell<Executor>>, budget_ms: u64) {
        ex.borrow_mut().time_budget_ms = budget_ms;
    }

    /// Set a safety cap on the deferred signal callback queue.
    ///
    /// When set to `Some(n)`, the executor will panic if more than `n`
    /// deferred callbacks accumulate between two flush cycles.  This is a
    /// safety net for SSR / multi-tenant servers where a runaway signal
    /// loop could exhaust memory — in a single-threaded Wasm context,
    /// unbounded accumulation is acceptable because it blocks the UI
    /// thread anyway.
    ///
    /// Default: `None` (no limit).
    pub fn set_max_deferred_callbacks(ex: &Rc<RefCell<Executor>>, limit: Option<usize>) {
        ex.borrow_mut().max_deferred_callbacks = limit;
    }

    /// Register a callback invoked whenever a spawned task panics.
    ///
    /// The default is no hook — panicking tasks are silently removed
    /// from the executor (the same behaviour as a task returning
    /// `Poll::Ready(())`).
    ///
    /// # Example
    ///
    /// ```rust,ignore
    /// Executor::set_panic_hook(&ex, Rc::new(|info| {
    ///     eprintln!("task {} in scope {} panicked", info.task_id, info.scope_id);
    /// }));
    /// ```
    pub fn set_panic_hook(ex: &Rc<RefCell<Executor>>, hook: Rc<dyn Fn(PanicInfo)>) {
        ex.borrow_mut().panic_hook = Some(hook);
    }

    /// Register a timer: when `now_ms() >= deadline_ms`, enqueue
    /// `task_id` so it gets polled on the next flush.
    pub(crate) fn schedule_timer(ex: &Rc<RefCell<Executor>>, deadline_ms: u64, task_id: TaskId) {
        let mut e = ex.borrow_mut();
        // If this task already has a pending timer (e.g. previous SleepFuture
        // was dropped via select!), clean up the old entry so the timer map
        // doesn't accumulate stale deadlines.
        let old_deadline = e
            .tasks
            .get(task_id as usize)
            .and_then(Option::as_ref)
            .map_or(0, |t| t.timer_deadline);
        if old_deadline != 0 {
            e.cleanup_timer(task_id, old_deadline);
        }
        e.timers.entry(deadline_ms).or_default().push(task_id);
        // Set the reverse index so cancel_scope_tasks can find this entry.
        if let Some(Some(ref mut t)) = e.tasks.get_mut(task_id as usize) {
            t.timer_deadline = deadline_ms;
        }
        // Request a flush so the timer is checked.
        e.is_flush_scheduled = false;
        let maybe_sched = e.try_schedule_flush();
        drop(e);
        if let Some(sched) = maybe_sched {
            let ex2 = Rc::clone(ex);
            sched.schedule(Box::new(move || Self::flush_instance(&ex2)));
        }
    }

    /// Spawn a future on this executor instance.
    pub fn spawn(ex: &Rc<RefCell<Executor>>, future: impl Future<Output = ()> + 'static) {
        let maybe_sched = {
            let mut e = ex.borrow_mut();
            let tid = e.allocate_id();
            e.tasks[tid as usize] = Some(TaskState {
                future: Box::pin(future),
                priority: Priority::Low,
                scope_id: 0,
                timer_deadline: 0,
                total_poll_count: 0,
                last_poll_duration_us: 0,
            });
            e.enqueue(tid);
            e.try_schedule_flush()
        };
        if let Some(sched) = maybe_sched {
            let ex2 = Rc::clone(ex);
            sched.schedule(Box::new(move || Self::flush_instance(&ex2)));
        }
    }

    /// Run a full flush cycle on this executor instance.
    ///
    /// Mirrors the global flush cycle but operates on an
    /// isolated executor (used for SSR).  Includes all the same
    /// protections: `catch_unwind`, suspend checks, time-budget
    /// yielding, and callback-drain budget.
    #[allow(clippy::too_many_lines)]
    pub fn flush_instance(ex: &Rc<RefCell<Executor>>) {
        // Guard against re-entrant flushes.
        {
            let mut e = ex.borrow_mut();
            if e.in_flush {
                #[cfg(debug_assertions)]
                {
                    eprintln!(
                        "[auralis-task] WARNING: Executor::flush_instance called \
                         re-entrantly (already inside a flush). This is a no-op. \
                         Check for nested flush() calls in signal callbacks or \
                         ScheduleFlush implementations."
                    );
                }
                return;
            }
            e.in_flush = true;
        }

        // Set this executor as the current one so that TaskWaker
        // (which cannot hold an Rc) can discover it via thread-local.
        // Restore on scope exit (including early returns for time-budget
        // yielding and re-entrancy).
        let prev_executor = CURRENT_EXECUTOR.with(|c| c.borrow_mut().replace(Rc::clone(ex)));
        let _restore = RestoreExecutor(prev_executor);

        // Step 0: drain expired timers.
        {
            let mut e = ex.borrow_mut();
            let now = e.now_ms();
            // When no TimeSource is registered (now == 0), expire all
            // timers — they've already been woken via wake_by_ref and
            // just need to be re-polled.
            if now == 0 {
                for (_, tasks) in std::mem::take(&mut e.timers) {
                    for tid in tasks {
                        // Clear the reverse index since the timer has fired.
                        if let Some(Some(ref mut t)) = e.tasks.get_mut(tid as usize) {
                            t.timer_deadline = 0;
                        }
                        e.enqueue(tid);
                    }
                }
            } else {
                let expired: Vec<u64> =
                    e.timers.keys().copied().take_while(|&d| d <= now).collect();
                for deadline in expired {
                    if let Some(tasks) = e.timers.remove(&deadline) {
                        for tid in tasks {
                            if let Some(Some(ref mut t)) = e.tasks.get_mut(tid as usize) {
                                t.timer_deadline = 0;
                            }
                            e.enqueue(tid);
                        }
                    }
                }
            }
        }

        // Step 1: deferred ops.
        let deferred = std::mem::take(&mut ex.borrow_mut().deferred_ops);
        for op in deferred {
            (op.f)();
        }

        // Steps 2+3 may need to re-run if task polling queues new
        // signal callbacks (re-entrant cross-scope propagation).
        for _pass in 0..3_u8 {
            {
                let cb_start = ex.borrow().now_ms();
                loop {
                    let callbacks = std::mem::take(&mut ex.borrow_mut().deferred_callbacks);
                    if callbacks.is_empty() {
                        break;
                    }
                    for cb in callbacks {
                        // Isolate each callback so a panic in one subscriber
                        // doesn't block the remaining notifications or wedge
                        // the executor (in_flush stays true on unwind).
                        let _ = std::panic::catch_unwind(std::panic::AssertUnwindSafe(cb));
                    }
                    if ex.borrow().now_ms().saturating_sub(cb_start) >= ex.borrow().time_budget_ms {
                        if !ex.borrow().deferred_callbacks.is_empty() {
                            let (sched, ex2) = {
                                let mut e = ex.borrow_mut();
                                e.in_flush = false;
                                e.is_flush_scheduled = false;
                                (e.try_schedule_flush(), Rc::clone(ex))
                            };
                            if let Some(sched) = sched {
                                sched.schedule(Box::new(move || Self::flush_instance(&ex2)));
                            }
                            return;
                        }
                        break;
                    }
                }
            }

            // Step 3: main poll loop with time-budget check.
            let poll_start = ex.borrow().now_ms();
            loop {
                let task_id = ex.borrow_mut().dequeue();
                let Some(tid) = task_id else {
                    let mut e = ex.borrow_mut();
                    e.is_flush_scheduled = false;
                    e.in_flush = false;
                    break;
                };

                // Take the task out so the poll doesn't hold an executor borrow.
                let maybe_state = ex.borrow_mut().tasks[tid as usize].take();
                if let Some(mut state) = maybe_state {
                    let priority = state.priority;
                    let scope_id = state.scope_id;

                    // Check if the owning scope is suspended.
                    let scope = crate::scope::find_scope(scope_id);
                    if let Some(ref s) = scope {
                        if s.is_suspended() {
                            let mut e = ex.borrow_mut();
                            if e.tasks[tid as usize].is_none() {
                                e.tasks[tid as usize] = Some(state);
                            }
                            continue;
                        }
                    }

                    // Ensure the executor is registered in the slot table.
                    // Must not call ensure_global_registered while holding
                    // a borrow on ex (it borrows the global EXECUTOR).
                    let (slot_id, gen) = {
                        let e = ex.borrow();
                        if e.registered {
                            (e.slot_id, e.generation)
                        } else {
                            drop(e);
                            ensure_global_registered()
                        }
                    };
                    let waker = Waker::from(Arc::new(TaskWaker {
                        task_id: tid,
                        priority,
                        slot_id,
                        generation: gen,
                    }));
                    let mut cx = Context::from_waker(&waker);

                    // Inject owning scope.
                    let prev_scope = crate::scope::get_scope_direct();
                    if scope.is_some() {
                        crate::scope::set_scope_direct(scope);
                    }

                    // Let futures discover their task id (used by timer::sleep).
                    // Save and restore so that a nested flush (sync scheduler)
                    // doesn't leave the outer task without its id afterward.
                    let prev_polling = CURRENT_POLLING_TASK.with(|c| c.replace(Some(tid)));

                    // Task isolation + timing.
                    state.total_poll_count = state.total_poll_count.wrapping_add(1);
                    let t0 = auralis_signal::now_us();
                    let result: Result<Poll<()>, Box<dyn std::any::Any + Send>> =
                        std::panic::catch_unwind(std::panic::AssertUnwindSafe(|| {
                            state.future.as_mut().poll(&mut cx)
                        }));
                    let elapsed = auralis_signal::now_us().saturating_sub(t0);

                    CURRENT_POLLING_TASK.with(|c| c.set(prev_polling));
                    crate::scope::set_scope_direct(prev_scope);

                    // Extract timer_deadline before state is dropped, so
                    // we can clean up the timer entry (free_slot can't
                    // read it because the slot is already None).
                    let timer_dl = state.timer_deadline;

                    state.last_poll_duration_us = elapsed;
                    match result {
                        Ok(Poll::Ready(())) => {
                            if timer_dl != 0 {
                                ex.borrow_mut().cleanup_timer(tid, timer_dl);
                            }
                            ex.borrow_mut().free_slot(tid);
                        }
                        Err(payload) => {
                            if timer_dl != 0 {
                                ex.borrow_mut().cleanup_timer(tid, timer_dl);
                            }
                            let hook = ex.borrow().panic_hook.clone();
                            if let Some(h) = hook {
                                h(PanicInfo {
                                    task_id: tid,
                                    scope_id,
                                    payload,
                                });
                            }
                            ex.borrow_mut().free_slot(tid);
                        }
                        Ok(Poll::Pending) => {
                            let mut e = ex.borrow_mut();
                            if e.tasks[tid as usize].is_none() {
                                e.tasks[tid as usize] = Some(state);
                            }
                        }
                    }
                }

                // Time budget check.
                {
                    let elapsed = ex.borrow().now_ms().saturating_sub(poll_start);
                    if elapsed >= ex.borrow().time_budget_ms {
                        let (maybe_sched, ex_clone) = {
                            let mut e = ex.borrow_mut();
                            e.is_flush_scheduled = false;
                            e.in_flush = false;
                            let sched = if !e.high_queue.is_empty() || !e.low_queue.is_empty() {
                                e.try_schedule_flush()
                            } else {
                                None
                            };
                            (sched, Rc::clone(ex))
                        };
                        if let Some(sched) = maybe_sched {
                            sched.schedule(Box::new(move || Self::flush_instance(&ex_clone)));
                        }
                        break;
                    }
                }
            }

            // Drain any wakes that were buffered while the executor RefCell
            // was borrowed (PENDING_WAKES fallback in TaskWaker::wake).
            drain_pending_wakes();

            // Continue only if signal callbacks accumulated during
            // polling and there are tasks to wake.
            if ex.borrow().deferred_callbacks.is_empty() {
                break;
            }
        } // end passes loop
    }
}

// ---------------------------------------------------------------------------
// Current-executor storage — injectable, defaults to thread-local
// ---------------------------------------------------------------------------

pub(crate) type ExecutorRef = Rc<RefCell<Executor>>;

/// RAII guard that restores the previous executor when dropped.
struct RestoreExecutor(Option<ExecutorRef>);

impl Drop for RestoreExecutor {
    fn drop(&mut self) {
        CURRENT_EXECUTOR.with(|c| {
            *c.borrow_mut() = self.0.take();
        });
    }
}

thread_local! {
    static CURRENT_EXECUTOR: RefCell<Option<ExecutorRef>> = const { RefCell::new(None) };
}

/// Run `f` with `ex` set as the current executor.
///
/// Signal callbacks and `spawn_global` calls inside `f` will be routed
/// to `ex` instead of the global thread-local executor.  Restores the
/// previous executor afterward.
///
/// # Signal routing constraints
///
/// Auralis uses a **single global schedule hook** (installed once by the
/// first call to [`init_flush_scheduler`]) that decides where signal
/// notifications land by checking the current executor **at the time the
/// notification fires**, not at the time `Signal::set` is called.
///
/// This design implies two hard requirements for multi-instance users:
///
/// 1. **`init_flush_scheduler` must be called at least once** — without
///    it, `Signal::set` falls back to synchronous callback execution,
///    which breaks the deferred-notification model and can cause
///    re-entrant borrow panics.
/// 2. **The instance executor must still be "current" when the flush
///    runs** — if `with_executor` has already exited, deferred callbacks
///    from signals set inside `f` will be routed to the global executor
///    (or synchronously if no global hook is installed).
///
/// For the typical single-threaded case (Wasm, game loop, CLI), both
/// requirements are satisfied trivially: call `init_flush_scheduler`
/// once at startup and never use `with_executor`.  For SSR / multi-tenant
/// servers, ensure that `with_executor` wraps the entire request
/// lifecycle — from signal creation through the final flush.
///
/// # Example
///
/// ```rust,ignore
/// use auralis_task::Executor;
///
/// let ex = Executor::new_instance();
/// Executor::install_flush_scheduler(&ex, my_scheduler);
/// auralis_task::with_executor(&ex, || {
///     // Signal notifications and task spawns here go to `ex`.
/// });
/// ```
pub fn with_executor<R>(ex: &ExecutorRef, f: impl FnOnce() -> R) -> R {
    CURRENT_EXECUTOR.with(|exec| {
        let prev = exec.borrow_mut().replace(Rc::clone(ex));
        let result = f();
        *exec.borrow_mut() = prev;
        result
    })
}

/// Return the current executor, if any.
///
/// If no executor has been set via [`with_executor`], returns `None` —
/// callers should fall back to the global thread-local executor.
fn current_executor() -> Option<ExecutorRef> {
    CURRENT_EXECUTOR.with(|exec| exec.borrow().clone())
}

/// Return the currently active executor instance.
///
/// If [`with_executor`] was used to set an instance executor, returns
/// that; otherwise returns the global thread-local executor.
pub(crate) fn current_executor_instance() -> ExecutorRef {
    current_executor().unwrap_or_else(|| EXECUTOR.with(Rc::clone))
}

/// Return the current time in milliseconds from the active executor's
/// [`TimeSource`], or 0 if none is installed.
pub(crate) fn current_time_ms() -> u64 {
    current_executor_instance().borrow().now_ms()
}

// ---------------------------------------------------------------------------
// Helpers — use thread_local EXECUTOR
// ---------------------------------------------------------------------------

/// Drain wakes that were buffered into [`PENDING_WAKES`] because the
/// executor's `RefCell` was borrowed at the time [`TaskWaker::wake`]
/// fired.  Called at the end of every [`Executor::flush_instance`].
fn drain_pending_wakes() {
    PENDING_WAKES.with(|pw| {
        let wakes = std::mem::take(&mut *pw.borrow_mut());
        for (tid, slot_id, gen) in wakes {
            let Some(exec) = lookup_executor(slot_id, gen) else {
                continue;
            };
            // Use enqueue() for the stale-task-id safety check.
            exec.borrow_mut().enqueue(tid);
            let maybe_sched = exec.borrow_mut().try_schedule_flush();
            if let Some(sched) = maybe_sched {
                let sid = slot_id;
                let g = gen;
                sched.schedule(Box::new(move || {
                    if let Some(ex) = lookup_executor(sid, g) {
                        Executor::flush_instance(&ex);
                    }
                }));
            }
        }
    });
}

// ---------------------------------------------------------------------------
// Flush
// ---------------------------------------------------------------------------

fn flush() {
    EXECUTOR.with(Executor::flush_instance);
}

// ---------------------------------------------------------------------------
// Public API
// ---------------------------------------------------------------------------

/// Check the deferred callback limit before pushing.
fn check_callback_limit(ex: &Executor) {
    if let Some(limit) = ex.max_deferred_callbacks {
        assert!(
            ex.deferred_callbacks.len() < limit,
            "deferred callback limit exceeded ({limit}). \
             This usually indicates an unbounded signal-set loop. \
             Increase the limit via set_max_deferred_callbacks() \
             or disable it with None."
        );
    }
}

/// Set the platform flush scheduler and install the signal deferred-
/// callback hook.
///
/// Idempotent — subsequent calls are no-ops (the hook is installed via
/// [`std::sync::OnceLock`], so it fires exactly once per process).
///
/// # Threading constraint
///
/// The hook is **per-process** and routes signal notifications to the
/// executor that is "current" when the notification fires (see
/// [`with_executor`]).  For single-threaded use (Wasm, CLI) this is
/// transparent.  For multi-threaded SSR, enable the `ssr-tokio` feature
/// and call [`init_scope_store_tokio`](crate::init_scope_store_tokio).
/// See [`with_executor`] for the full routing contract.
pub fn init_flush_scheduler(sched: Rc<dyn ScheduleFlush>) {
    EXECUTOR.with(|exec| exec.borrow_mut().flush_scheduler = Some(sched));
    install_signal_hook_once();
}

/// Check whether a flush scheduler has already been installed on the
/// global executor.
///
/// Used by [`auralis_devtools::init`] to decide whether to auto-install
/// a [`DeferredScheduler`](crate::scheduler::DeferredScheduler).
#[must_use]
pub fn has_flush_scheduler() -> bool {
    EXECUTOR.with(|exec| exec.borrow().flush_scheduler.is_some())
}

/// Drain pending deferred signal callbacks on the global executor.
///
/// Unlike [`Executor::flush_instance`], this does **not** poll tasks or
/// expire timers — it only processes callbacks that [`Signal::set`]
/// pushed before a scheduler was installed.  Snapshot and diagnostic
/// tools call this to ensure memo dirty state is consistent before
/// reading the registry.
///
/// Safe to call when no scheduler is installed (no-op).  Callbacks are
/// [`catch_unwind`]-isolated so a panic in one subscriber doesn't block
/// the rest.  Uses [`RefCell::try_borrow_mut`] so that calling this from
/// within an in-progress flush (re-entrant snapshot) is a safe no-op
/// instead of a panic.
///
/// [`RefCell::try_borrow_mut`]: std::cell::RefCell::try_borrow_mut
pub fn drain_deferred_signal_callbacks() {
    loop {
        let callbacks = EXECUTOR.with(|ex| {
            ex.try_borrow_mut()
                .map(|mut e| std::mem::take(&mut e.deferred_callbacks))
                .unwrap_or_default()
        });
        if callbacks.is_empty() {
            break;
        }
        for cb in callbacks {
            let _ = std::panic::catch_unwind(std::panic::AssertUnwindSafe(cb));
        }
    }
}

/// Install the hook that bridges `auralis_signal::Signal::set` to the
/// executor's deferred-callback queue.
///
/// Idempotent — safe to call multiple times.
fn install_signal_hook_once() {
    use std::sync::OnceLock;
    static INSTALLED: OnceLock<()> = OnceLock::new();
    INSTALLED.get_or_init(|| {
        auralis_signal::install_schedule_hook(Box::new(|cb: Box<dyn FnOnce()>| {
            // Prefer the current executor (set via `with_executor`) for
            // SSR multi-request isolation; fall back to the global one.
            if let Some(ex) = current_executor() {
                let maybe_sched = {
                    let mut e = ex.borrow_mut();
                    check_callback_limit(&e);
                    e.deferred_callbacks.push(cb);
                    if e.in_flush {
                        None
                    } else {
                        e.try_schedule_flush()
                    }
                };
                if let Some(sched) = maybe_sched {
                    let ex2 = Rc::clone(&ex);
                    sched.schedule(Box::new(move || Executor::flush_instance(&ex2)));
                }
            } else {
                EXECUTOR.with(|exec| {
                    let maybe_sched = {
                        let mut ex = exec.borrow_mut();
                        check_callback_limit(&ex);
                        ex.deferred_callbacks.push(cb);
                        if ex.in_flush {
                            None
                        } else {
                            ex.try_schedule_flush()
                        }
                    };
                    if let Some(sched) = maybe_sched {
                        sched.schedule(Box::new(flush));
                    }
                });
            }
        }));
    });
}

/// Set the platform time source used for time-budget accounting.
///
/// If no [`TimeSource`] is registered the executor runs every flush to
/// completion without yielding, which is acceptable for short-running
/// workloads but may cause frame drops in the browser.
pub fn init_time_source(ts: Rc<dyn TimeSource>) {
    EXECUTOR.with(|exec| exec.borrow_mut().time_source = Some(ts));
}

/// Set the per-flush time budget on the **global** thread-local executor.
///
/// This does **not** affect instance executors created via
/// [`Executor::new_instance`] — those carry their own budget (default
/// 8 ms) and must be configured via [`Executor::set_time_budget`].
///
/// See [`Executor::set_time_budget`] for the full semantics.
pub fn set_global_time_budget(budget_ms: u64) {
    EXECUTOR.with(|exec| exec.borrow_mut().time_budget_ms = budget_ms);
}

/// Set the deferred callback safety cap on the global executor.
///
/// See [`Executor::set_max_deferred_callbacks`] for details.
pub fn set_global_max_deferred_callbacks(limit: Option<usize>) {
    EXECUTOR.with(|exec| exec.borrow_mut().max_deferred_callbacks = limit);
}

/// Register a global panic hook called when any globally-spawned
/// task panics.
///
/// See [`Executor::set_panic_hook`] for details.
pub fn set_panic_hook(hook: Rc<dyn Fn(PanicInfo)>) {
    EXECUTOR.with(|exec| exec.borrow_mut().panic_hook = Some(hook));
}

/// Remove the global panic hook, restoring the default silent
/// behaviour.
pub fn remove_panic_hook() {
    EXECUTOR.with(|exec| exec.borrow_mut().panic_hook = None);
}

/// Spawn a future on the global executor at low priority.
///
/// **Important:** [`init_flush_scheduler`] must be called before spawning
/// any tasks.  Without a flush scheduler, spawned tasks will sit in the
/// queue indefinitely because the executor has no way to schedule a flush
/// cycle.
pub fn spawn_global(future: impl Future<Output = ()> + 'static) {
    spawn_global_with_priority(Priority::Low, future);
}

/// Spawn a future on the global executor at the given priority.
pub fn spawn_global_with_priority(priority: Priority, future: impl Future<Output = ()> + 'static) {
    spawn_inner_on(&EXECUTOR.with(Rc::clone), Box::pin(future), priority, 0);
}

/// Spawn a future on a specific executor and scope.
pub(crate) fn spawn_scoped_on(
    ex: &Rc<RefCell<Executor>>,
    priority: Priority,
    scope_id: u64,
    future: impl Future<Output = ()> + 'static,
) -> TaskId {
    spawn_inner_on(ex, Box::pin(future), priority, scope_id)
}

fn spawn_inner_on(
    ex: &Rc<RefCell<Executor>>,
    future: Pin<Box<dyn Future<Output = ()> + 'static>>,
    priority: Priority,
    scope_id: u64,
) -> TaskId {
    let (task_id, maybe_sched) = {
        let mut e = ex.borrow_mut();
        let task_id = e.allocate_id();
        e.tasks[task_id as usize] = Some(TaskState {
            future,
            priority,
            scope_id,
            timer_deadline: 0,
            total_poll_count: 0,
            last_poll_duration_us: 0,
        });
        e.enqueue(task_id);
        let sched = e.try_schedule_flush();
        (task_id, sched)
    };
    if let Some(sched) = maybe_sched {
        let ex2 = Rc::clone(ex);
        sched.schedule(Box::new(move || Executor::flush_instance(&ex2)));
    }
    task_id
}

/// Enqueue all tasks belonging to `scope_id` on a given executor.
///
/// Used by [`TaskScope::resume`] to restart tasks after a suspend.
pub(crate) fn enqueue_scope_tasks_on(ex: &ExecutorRef, task_ids: &[TaskId]) {
    if task_ids.is_empty() {
        return;
    }
    let maybe_sched = {
        let mut e = ex.borrow_mut();
        for tid in task_ids {
            e.enqueue(*tid);
        }
        if e.in_flush {
            None
        } else {
            e.try_schedule_flush()
        }
    };
    if let Some(sched) = maybe_sched {
        let ex2 = Rc::clone(ex);
        sched.schedule(Box::new(move || Executor::flush_instance(&ex2)));
    }
}
/// Cancel all tasks belonging to `scope_id` on a specific executor.
pub(crate) fn cancel_scope_tasks_on(
    ex: &Rc<RefCell<Executor>>,
    task_ids: &[TaskId],
) -> Vec<Pin<Box<dyn Future<Output = ()>>>> {
    if task_ids.is_empty() {
        return Vec::new();
    }

    let mut e = ex.borrow_mut();
    let mut dropped = Vec::with_capacity(task_ids.len());

    // Collect timer deadlines before mutating.
    let mut timer_deadlines: Vec<(u64, TaskId)> = Vec::new();
    for &tid in task_ids {
        let idx = tid as usize;
        if idx < e.tasks.len() {
            if let Some(ref t) = e.tasks[idx] {
                if t.timer_deadline != 0 {
                    timer_deadlines.push((t.timer_deadline, tid));
                }
            }
        }
    }
    for (dl, tid) in &timer_deadlines {
        e.cleanup_timer(*tid, *dl);
    }

    // Cancel each task by id (direct lookup, no full-table scan).
    // Only push to free_slots for slots we actually took.
    for &tid in task_ids {
        let idx = tid as usize;
        if idx < e.tasks.len() {
            if let Some(state) = e.tasks[idx].take() {
                dropped.push(state.future);
                e.free_slots.push(tid);
            }
        }
    }
    e.free_slots.sort_unstable();
    e.free_slots.dedup();

    // Filter queues to remove cancelled tasks.
    let high: Vec<TaskId> = e
        .high_queue
        .iter()
        .copied()
        .filter(|&id| {
            let idx = id as usize;
            idx < e.tasks.len() && e.tasks[idx].is_some()
        })
        .collect();
    e.high_queue.clear();
    e.high_queue.extend(high);

    let low: Vec<TaskId> = e
        .low_queue
        .iter()
        .copied()
        .filter(|&id| {
            let idx = id as usize;
            idx < e.tasks.len() && e.tasks[idx].is_some()
        })
        .collect();
    e.low_queue.clear();
    e.low_queue.extend(low);

    dropped
}

/// Cancel a single task by its id, dropping its future and cleaning up
/// its timer if any.  No-op if the task has already completed.
pub(crate) fn cancel_task(ex: &Rc<RefCell<Executor>>, task_id: TaskId) {
    let mut e = ex.borrow_mut();
    let idx = task_id as usize;
    if idx >= e.tasks.len() {
        return;
    }
    let deadline = e.tasks[idx].as_ref().map_or(0, |t| t.timer_deadline);
    if deadline != 0 {
        e.cleanup_timer(task_id, deadline);
    }
    let slot = e.tasks[idx].take();
    if slot.is_some() {
        e.free_slots.push(task_id);
        e.high_queue.retain(|&id| id != task_id);
        e.low_queue.retain(|&id| id != task_id);
    }
}

/// Check whether a task slot is empty (task completed or was cancelled).
pub(crate) fn is_task_finished(ex: &Rc<RefCell<Executor>>, task_id: TaskId) -> bool {
    let e = ex.borrow();
    let idx = task_id as usize;
    idx >= e.tasks.len() || e.tasks[idx].is_none()
}

// ---------------------------------------------------------------------------
// yield_now
// ---------------------------------------------------------------------------

/// Return a [`Future`] that yields control back to the executor once.
#[must_use = "yield_now() does nothing unless awaited"]
pub fn yield_now() -> YieldNow {
    YieldNow { yielded: false }
}

/// Future returned by [`yield_now`].
#[derive(Debug)]
#[must_use = "futures do nothing unless polled"]
pub struct YieldNow {
    yielded: bool,
}

impl Future for YieldNow {
    type Output = ();

    fn poll(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Self::Output> {
        if self.yielded {
            Poll::Ready(())
        } else {
            self.yielded = true;
            cx.waker().wake_by_ref();
            Poll::Pending
        }
    }
}

// ---------------------------------------------------------------------------
// schedule_callback — hook for auralis-signal's deferred callback model
// ---------------------------------------------------------------------------

/// Schedule a closure to run at the start of the next executor flush.
///
/// Used internally by `auralis_signal` to defer subscriber callback
/// execution.  The closure is drained before the main poll loop.
///
/// Routes to the current executor (via [`with_executor`]) when one is
/// active; falls back to the global thread-local executor.
pub fn schedule_callback(f: Box<dyn FnOnce()>) {
    let exec = current_executor_instance();
    let maybe_sched = {
        let mut ex = exec.borrow_mut();
        check_callback_limit(&ex);
        ex.deferred_callbacks.push(f);
        if ex.in_flush {
            None
        } else {
            ex.try_schedule_flush()
        }
    };
    if let Some(sched) = maybe_sched {
        let ex2 = Rc::clone(&exec);
        sched.schedule(Box::new(move || Executor::flush_instance(&ex2)));
    }
}

// ---------------------------------------------------------------------------
// set_deferred
// ---------------------------------------------------------------------------

/// Schedule a [`Signal::set`] call for the **next** executor flush.
///
/// Safe to call from inside [`Drop`] — the actual `signal.set(value)` is
/// deferred to a subsequent flush, avoiding re-entrant borrow panics.
///
/// Routes to the current executor (via [`with_executor`]) when one is
/// active; falls back to the global thread-local executor.
pub fn set_deferred<T: 'static>(signal: &Signal<T>, value: T) {
    let signal = signal.clone();
    let exec = current_executor_instance();
    let maybe_sched = {
        let mut ex = exec.borrow_mut();
        ex.deferred_ops.push(DeferredOp {
            f: Box::new(move || signal.set(value)),
        });
        ex.try_schedule_flush()
    };
    if let Some(sched) = maybe_sched {
        let ex2 = Rc::clone(&exec);
        sched.schedule(Box::new(move || Executor::flush_instance(&ex2)));
    }
}

// ---------------------------------------------------------------------------
// Test / debug helpers
// ---------------------------------------------------------------------------

/// Completely reset the global executor to a pristine state.
///
/// Clears all task slots, queues, deferred ops, flush/scheduler flags,
/// and injected [`ScheduleFlush`]/[`TimeSource`].  Call at the start
/// of every test to prevent cross-test state leakage.
///
/// Note that the signal schedule hook (installed by
/// [`init_flush_scheduler`] via [`std::sync::OnceLock`]) **persists**
/// across resets — the hook references the global [`EXECUTOR`]
/// thread-local, and this function re-initialises that same executor
/// in place rather than replacing it.  This is correct behaviour:
/// after reset, signal notifications route to the freshly-cleared
/// global executor.
///
/// # Safety / usage
///
/// This function is intended **only** for testing.  Calling it while
/// the executor is processing tasks will silently drop all live
/// futures and may cause panics or undefined behavior in running
/// application code.
pub fn reset_executor_for_test() {
    PENDING_WAKES.with(|pw| pw.borrow_mut().clear());
    SLOTS.with(|s| s.borrow_mut().clear());
    CURRENT_EXECUTOR.with(|c| *c.borrow_mut() = None);
    EXECUTOR.with(|exec| {
        let mut ex = exec.borrow_mut();
        ex.high_queue.clear();
        ex.low_queue.clear();
        ex.tasks.clear();
        ex.free_slots.clear();
        ex.next_task_id = 0;
        ex.is_flush_scheduled = false;
        ex.in_flush = false;
        ex.deferred_ops.clear();
        ex.deferred_callbacks.clear();
        ex.flush_scheduler = None;
        ex.time_source = None;
        ex.slot_id = 0;
        ex.generation = 0;
        ex.registered = false;
    });
    crate::scope::clear_scope_registry();
}

#[cfg(any(test, feature = "debug"))]
pub(crate) fn debug_task_count() -> usize {
    EXECUTOR.with(|exec| exec.borrow().tasks.iter().filter(|t| t.is_some()).count())
}

/// Return timing info for all active tasks: `task_id` → (`total_poll_count`, `last_poll_us`).
#[cfg(feature = "debug")]
pub(crate) fn debug_task_timing() -> std::collections::HashMap<TaskId, (u64, u64)> {
    EXECUTOR.with(|exec| {
        let ex = exec.borrow();
        let mut map = std::collections::HashMap::new();
        for (idx, slot) in ex.tasks.iter().enumerate() {
            if let Some(ref t) = slot {
                map.insert(idx as u64, (t.total_poll_count, t.last_poll_duration_us));
            }
        }
        map
    })
}

/// Return a snapshot of all active tasks: `(task_id, priority, scope_id)`.
#[cfg(feature = "debug")]
pub(crate) fn debug_task_snapshot() -> Vec<(TaskId, Priority, u64)> {
    EXECUTOR.with(|exec| {
        let ex = exec.borrow();
        let mut snap = Vec::new();
        for (idx, slot) in ex.tasks.iter().enumerate() {
            if let Some(ref t) = slot {
                snap.push((idx as u64, t.priority, t.scope_id));
            }
        }
        snap
    })
}

/// Return the set of task IDs currently in the ready queues.
#[cfg(feature = "debug")]
pub(crate) fn debug_queued_task_ids() -> Vec<TaskId> {
    EXECUTOR.with(|exec| {
        let ex = exec.borrow();
        let mut ids: Vec<TaskId> = ex
            .high_queue
            .iter()
            .chain(ex.low_queue.iter())
            .copied()
            .collect();
        ids.sort_unstable();
        ids.dedup();
        ids
    })
}

/// Spawn a task without triggering an automatic flush.
/// Used in tests to batch multiple spawns before executing them.
#[cfg(test)]
pub(crate) fn spawn_no_auto_flush(
    priority: Priority,
    future: impl Future<Output = ()> + 'static,
) -> TaskId {
    EXECUTOR.with(|exec| {
        let mut ex = exec.borrow_mut();
        let task_id = ex.allocate_id();
        ex.tasks[task_id as usize] = Some(TaskState {
            future: Box::pin(future),
            priority,
            scope_id: 0,
            timer_deadline: 0,
            total_poll_count: 0,
            last_poll_duration_us: 0,
        });
        ex.enqueue(task_id);
        // Do NOT schedule flush.
        task_id
    })
}

/// Run a manual flush cycle (for tests that need to control timing).
#[cfg(test)]
pub(crate) fn flush_all() {
    flush();
}