#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - PWM Clock Register"]
pub clk: CLK,
#[doc = "0x04 - PWM Enable Register"]
pub ena: ENA,
#[doc = "0x08 - PWM Disable Register"]
pub dis: DIS,
#[doc = "0x0c - PWM Status Register"]
pub sr: SR,
#[doc = "0x10 - PWM Interrupt Enable Register 1"]
pub ier1: IER1,
#[doc = "0x14 - PWM Interrupt Disable Register 1"]
pub idr1: IDR1,
#[doc = "0x18 - PWM Interrupt Mask Register 1"]
pub imr1: IMR1,
#[doc = "0x1c - PWM Interrupt Status Register 1"]
pub isr1: ISR1,
#[doc = "0x20 - PWM Sync Channels Mode Register"]
pub scm: SCM,
#[doc = "0x24 - PWM DMA Register"]
pub dmar: DMAR,
#[doc = "0x28 - PWM Sync Channels Update Control Register"]
pub scuc: SCUC,
#[doc = "0x2c - PWM Sync Channels Update Period Register"]
pub scup: SCUP,
#[doc = "0x30 - PWM Sync Channels Update Period Update Register"]
pub scupupd: SCUPUPD,
#[doc = "0x34 - PWM Interrupt Enable Register 2"]
pub ier2: IER2,
#[doc = "0x38 - PWM Interrupt Disable Register 2"]
pub idr2: IDR2,
#[doc = "0x3c - PWM Interrupt Mask Register 2"]
pub imr2: IMR2,
#[doc = "0x40 - PWM Interrupt Status Register 2"]
pub isr2: ISR2,
#[doc = "0x44 - PWM Output Override Value Register"]
pub oov: OOV,
#[doc = "0x48 - PWM Output Selection Register"]
pub os: OS,
#[doc = "0x4c - PWM Output Selection Set Register"]
pub oss: OSS,
#[doc = "0x50 - PWM Output Selection Clear Register"]
pub osc: OSC,
#[doc = "0x54 - PWM Output Selection Set Update Register"]
pub ossupd: OSSUPD,
#[doc = "0x58 - PWM Output Selection Clear Update Register"]
pub oscupd: OSCUPD,
#[doc = "0x5c - PWM Fault Mode Register"]
pub fmr: FMR,
#[doc = "0x60 - PWM Fault Status Register"]
pub fsr: FSR,
#[doc = "0x64 - PWM Fault Clear Register"]
pub fcr: FCR,
#[doc = "0x68 - PWM Fault Protection Value Register 1"]
pub fpv1: FPV1,
#[doc = "0x6c - PWM Fault Protection Enable Register"]
pub fpe: FPE,
_reserved28: [u8; 0x0c],
#[doc = "0x7c..0x84 - PWM Event Line 0 Mode Register 0"]
pub elmr: [ELMR; 2],
_reserved29: [u8; 0x1c],
#[doc = "0xa0 - PWM Spread Spectrum Register"]
pub sspr: SSPR,
#[doc = "0xa4 - PWM Spread Spectrum Update Register"]
pub sspup: SSPUP,
_reserved31: [u8; 0x08],
#[doc = "0xb0 - PWM Stepper Motor Mode Register"]
pub smmr: SMMR,
_reserved32: [u8; 0x0c],
#[doc = "0xc0 - PWM Fault Protection Value 2 Register"]
pub fpv2: FPV2,
_reserved33: [u8; 0x20],
#[doc = "0xe4 - PWM Write Protection Control Register"]
pub wpcr: WPCR,
#[doc = "0xe8 - PWM Write Protection Status Register"]
pub wpsr: WPSR,
_reserved35: [u8; 0x44],
#[doc = "0x130..0x1b0 - PWM Comparison 0 Value Register"]
pub pwm_cmp: [PWM_CMP; 8],
_reserved36: [u8; 0x50],
#[doc = "0x200..0x280 - PWM Channel Mode Register"]
pub pwm_ch_num: [PWM_CH_NUM; 4],
_reserved37: [u8; 0x0180],
#[doc = "0x400 - PWM Channel Mode Update Register (ch_num = 0)"]
pub cmupd0: CMUPD0,
_reserved38: [u8; 0x1c],
#[doc = "0x420 - PWM Channel Mode Update Register (ch_num = 1)"]
pub cmupd1: CMUPD1,
_reserved39: [u8; 0x08],
#[doc = "0x42c - PWM External Trigger Register (trg_num = 1)"]
pub etrg1: ETRG1,
#[doc = "0x430 - PWM Leading-Edge Blanking Register (trg_num = 1)"]
pub lebr1: LEBR1,
_reserved41: [u8; 0x0c],
#[doc = "0x440 - PWM Channel Mode Update Register (ch_num = 2)"]
pub cmupd2: CMUPD2,
_reserved42: [u8; 0x08],
#[doc = "0x44c - PWM External Trigger Register (trg_num = 2)"]
pub etrg2: ETRG2,
#[doc = "0x450 - PWM Leading-Edge Blanking Register (trg_num = 2)"]
pub lebr2: LEBR2,
_reserved44: [u8; 0x0c],
#[doc = "0x460 - PWM Channel Mode Update Register (ch_num = 3)"]
pub cmupd3: CMUPD3,
}
#[doc = "CLK (rw) register accessor: an alias for `Reg<CLK_SPEC>`"]
pub type CLK = crate::Reg<clk::CLK_SPEC>;
#[doc = "PWM Clock Register"]
pub mod clk;
#[doc = "ENA (w) register accessor: an alias for `Reg<ENA_SPEC>`"]
pub type ENA = crate::Reg<ena::ENA_SPEC>;
#[doc = "PWM Enable Register"]
pub mod ena;
#[doc = "DIS (w) register accessor: an alias for `Reg<DIS_SPEC>`"]
pub type DIS = crate::Reg<dis::DIS_SPEC>;
#[doc = "PWM Disable Register"]
pub mod dis;
#[doc = "SR (r) register accessor: an alias for `Reg<SR_SPEC>`"]
pub type SR = crate::Reg<sr::SR_SPEC>;
#[doc = "PWM Status Register"]
pub mod sr;
#[doc = "IER1 (w) register accessor: an alias for `Reg<IER1_SPEC>`"]
pub type IER1 = crate::Reg<ier1::IER1_SPEC>;
#[doc = "PWM Interrupt Enable Register 1"]
pub mod ier1;
#[doc = "IDR1 (w) register accessor: an alias for `Reg<IDR1_SPEC>`"]
pub type IDR1 = crate::Reg<idr1::IDR1_SPEC>;
#[doc = "PWM Interrupt Disable Register 1"]
pub mod idr1;
#[doc = "IMR1 (r) register accessor: an alias for `Reg<IMR1_SPEC>`"]
pub type IMR1 = crate::Reg<imr1::IMR1_SPEC>;
#[doc = "PWM Interrupt Mask Register 1"]
pub mod imr1;
#[doc = "ISR1 (r) register accessor: an alias for `Reg<ISR1_SPEC>`"]
pub type ISR1 = crate::Reg<isr1::ISR1_SPEC>;
#[doc = "PWM Interrupt Status Register 1"]
pub mod isr1;
#[doc = "SCM (rw) register accessor: an alias for `Reg<SCM_SPEC>`"]
pub type SCM = crate::Reg<scm::SCM_SPEC>;
#[doc = "PWM Sync Channels Mode Register"]
pub mod scm;
#[doc = "DMAR (w) register accessor: an alias for `Reg<DMAR_SPEC>`"]
pub type DMAR = crate::Reg<dmar::DMAR_SPEC>;
#[doc = "PWM DMA Register"]
pub mod dmar;
#[doc = "SCUC (rw) register accessor: an alias for `Reg<SCUC_SPEC>`"]
pub type SCUC = crate::Reg<scuc::SCUC_SPEC>;
#[doc = "PWM Sync Channels Update Control Register"]
pub mod scuc;
#[doc = "SCUP (rw) register accessor: an alias for `Reg<SCUP_SPEC>`"]
pub type SCUP = crate::Reg<scup::SCUP_SPEC>;
#[doc = "PWM Sync Channels Update Period Register"]
pub mod scup;
#[doc = "SCUPUPD (w) register accessor: an alias for `Reg<SCUPUPD_SPEC>`"]
pub type SCUPUPD = crate::Reg<scupupd::SCUPUPD_SPEC>;
#[doc = "PWM Sync Channels Update Period Update Register"]
pub mod scupupd;
#[doc = "IER2 (w) register accessor: an alias for `Reg<IER2_SPEC>`"]
pub type IER2 = crate::Reg<ier2::IER2_SPEC>;
#[doc = "PWM Interrupt Enable Register 2"]
pub mod ier2;
#[doc = "IDR2 (w) register accessor: an alias for `Reg<IDR2_SPEC>`"]
pub type IDR2 = crate::Reg<idr2::IDR2_SPEC>;
#[doc = "PWM Interrupt Disable Register 2"]
pub mod idr2;
#[doc = "IMR2 (r) register accessor: an alias for `Reg<IMR2_SPEC>`"]
pub type IMR2 = crate::Reg<imr2::IMR2_SPEC>;
#[doc = "PWM Interrupt Mask Register 2"]
pub mod imr2;
#[doc = "ISR2 (r) register accessor: an alias for `Reg<ISR2_SPEC>`"]
pub type ISR2 = crate::Reg<isr2::ISR2_SPEC>;
#[doc = "PWM Interrupt Status Register 2"]
pub mod isr2;
#[doc = "OOV (rw) register accessor: an alias for `Reg<OOV_SPEC>`"]
pub type OOV = crate::Reg<oov::OOV_SPEC>;
#[doc = "PWM Output Override Value Register"]
pub mod oov;
#[doc = "OS (rw) register accessor: an alias for `Reg<OS_SPEC>`"]
pub type OS = crate::Reg<os::OS_SPEC>;
#[doc = "PWM Output Selection Register"]
pub mod os;
#[doc = "OSS (w) register accessor: an alias for `Reg<OSS_SPEC>`"]
pub type OSS = crate::Reg<oss::OSS_SPEC>;
#[doc = "PWM Output Selection Set Register"]
pub mod oss;
#[doc = "OSC (w) register accessor: an alias for `Reg<OSC_SPEC>`"]
pub type OSC = crate::Reg<osc::OSC_SPEC>;
#[doc = "PWM Output Selection Clear Register"]
pub mod osc;
#[doc = "OSSUPD (w) register accessor: an alias for `Reg<OSSUPD_SPEC>`"]
pub type OSSUPD = crate::Reg<ossupd::OSSUPD_SPEC>;
#[doc = "PWM Output Selection Set Update Register"]
pub mod ossupd;
#[doc = "OSCUPD (w) register accessor: an alias for `Reg<OSCUPD_SPEC>`"]
pub type OSCUPD = crate::Reg<oscupd::OSCUPD_SPEC>;
#[doc = "PWM Output Selection Clear Update Register"]
pub mod oscupd;
#[doc = "FMR (rw) register accessor: an alias for `Reg<FMR_SPEC>`"]
pub type FMR = crate::Reg<fmr::FMR_SPEC>;
#[doc = "PWM Fault Mode Register"]
pub mod fmr;
#[doc = "FSR (r) register accessor: an alias for `Reg<FSR_SPEC>`"]
pub type FSR = crate::Reg<fsr::FSR_SPEC>;
#[doc = "PWM Fault Status Register"]
pub mod fsr;
#[doc = "FCR (w) register accessor: an alias for `Reg<FCR_SPEC>`"]
pub type FCR = crate::Reg<fcr::FCR_SPEC>;
#[doc = "PWM Fault Clear Register"]
pub mod fcr;
#[doc = "FPV1 (rw) register accessor: an alias for `Reg<FPV1_SPEC>`"]
pub type FPV1 = crate::Reg<fpv1::FPV1_SPEC>;
#[doc = "PWM Fault Protection Value Register 1"]
pub mod fpv1;
#[doc = "FPE (rw) register accessor: an alias for `Reg<FPE_SPEC>`"]
pub type FPE = crate::Reg<fpe::FPE_SPEC>;
#[doc = "PWM Fault Protection Enable Register"]
pub mod fpe;
#[doc = "ELMR (rw) register accessor: an alias for `Reg<ELMR_SPEC>`"]
pub type ELMR = crate::Reg<elmr::ELMR_SPEC>;
#[doc = "PWM Event Line 0 Mode Register 0"]
pub mod elmr;
#[doc = "SSPR (rw) register accessor: an alias for `Reg<SSPR_SPEC>`"]
pub type SSPR = crate::Reg<sspr::SSPR_SPEC>;
#[doc = "PWM Spread Spectrum Register"]
pub mod sspr;
#[doc = "SSPUP (w) register accessor: an alias for `Reg<SSPUP_SPEC>`"]
pub type SSPUP = crate::Reg<sspup::SSPUP_SPEC>;
#[doc = "PWM Spread Spectrum Update Register"]
pub mod sspup;
#[doc = "SMMR (rw) register accessor: an alias for `Reg<SMMR_SPEC>`"]
pub type SMMR = crate::Reg<smmr::SMMR_SPEC>;
#[doc = "PWM Stepper Motor Mode Register"]
pub mod smmr;
#[doc = "FPV2 (rw) register accessor: an alias for `Reg<FPV2_SPEC>`"]
pub type FPV2 = crate::Reg<fpv2::FPV2_SPEC>;
#[doc = "PWM Fault Protection Value 2 Register"]
pub mod fpv2;
#[doc = "WPCR (w) register accessor: an alias for `Reg<WPCR_SPEC>`"]
pub type WPCR = crate::Reg<wpcr::WPCR_SPEC>;
#[doc = "PWM Write Protection Control Register"]
pub mod wpcr;
#[doc = "WPSR (r) register accessor: an alias for `Reg<WPSR_SPEC>`"]
pub type WPSR = crate::Reg<wpsr::WPSR_SPEC>;
#[doc = "PWM Write Protection Status Register"]
pub mod wpsr;
#[doc = "PWM Comparison 0 Value Register"]
pub use pwm_cmp::PWM_CMP;
#[doc = r"Cluster"]
#[doc = "PWM Comparison 0 Value Register"]
pub mod pwm_cmp;
#[doc = "PWM Channel Mode Register"]
pub use pwm_ch_num::PWM_CH_NUM;
#[doc = r"Cluster"]
#[doc = "PWM Channel Mode Register"]
pub mod pwm_ch_num;
#[doc = "CMUPD0 (w) register accessor: an alias for `Reg<CMUPD0_SPEC>`"]
pub type CMUPD0 = crate::Reg<cmupd0::CMUPD0_SPEC>;
#[doc = "PWM Channel Mode Update Register (ch_num = 0)"]
pub mod cmupd0;
#[doc = "CMUPD1 (w) register accessor: an alias for `Reg<CMUPD1_SPEC>`"]
pub type CMUPD1 = crate::Reg<cmupd1::CMUPD1_SPEC>;
#[doc = "PWM Channel Mode Update Register (ch_num = 1)"]
pub mod cmupd1;
#[doc = "ETRG1 (rw) register accessor: an alias for `Reg<ETRG1_SPEC>`"]
pub type ETRG1 = crate::Reg<etrg1::ETRG1_SPEC>;
#[doc = "PWM External Trigger Register (trg_num = 1)"]
pub mod etrg1;
#[doc = "LEBR1 (rw) register accessor: an alias for `Reg<LEBR1_SPEC>`"]
pub type LEBR1 = crate::Reg<lebr1::LEBR1_SPEC>;
#[doc = "PWM Leading-Edge Blanking Register (trg_num = 1)"]
pub mod lebr1;
#[doc = "CMUPD2 (w) register accessor: an alias for `Reg<CMUPD2_SPEC>`"]
pub type CMUPD2 = crate::Reg<cmupd2::CMUPD2_SPEC>;
#[doc = "PWM Channel Mode Update Register (ch_num = 2)"]
pub mod cmupd2;
#[doc = "ETRG2 (rw) register accessor: an alias for `Reg<ETRG2_SPEC>`"]
pub type ETRG2 = crate::Reg<etrg2::ETRG2_SPEC>;
#[doc = "PWM External Trigger Register (trg_num = 2)"]
pub mod etrg2;
#[doc = "LEBR2 (rw) register accessor: an alias for `Reg<LEBR2_SPEC>`"]
pub type LEBR2 = crate::Reg<lebr2::LEBR2_SPEC>;
#[doc = "PWM Leading-Edge Blanking Register (trg_num = 2)"]
pub mod lebr2;
#[doc = "CMUPD3 (w) register accessor: an alias for `Reg<CMUPD3_SPEC>`"]
pub type CMUPD3 = crate::Reg<cmupd3::CMUPD3_SPEC>;
#[doc = "PWM Channel Mode Update Register (ch_num = 3)"]
pub mod cmupd3;