atsams70j20b/usbhs/
devctrl.rs#[doc = "Register `DEVCTRL` reader"]
pub struct R(crate::R<DEVCTRL_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<DEVCTRL_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<DEVCTRL_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<DEVCTRL_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `DEVCTRL` writer"]
pub struct W(crate::W<DEVCTRL_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<DEVCTRL_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<DEVCTRL_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<DEVCTRL_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `UADD` reader - USB Address"]
pub type UADD_R = crate::FieldReader<u8, u8>;
#[doc = "Field `UADD` writer - USB Address"]
pub type UADD_W<'a, const O: u8> = crate::FieldWriter<'a, u32, DEVCTRL_SPEC, u8, u8, 7, O>;
#[doc = "Field `ADDEN` reader - Address Enable"]
pub type ADDEN_R = crate::BitReader<bool>;
#[doc = "Field `ADDEN` writer - Address Enable"]
pub type ADDEN_W<'a, const O: u8> = crate::BitWriter<'a, u32, DEVCTRL_SPEC, bool, O>;
#[doc = "Field `DETACH` reader - Detach"]
pub type DETACH_R = crate::BitReader<bool>;
#[doc = "Field `DETACH` writer - Detach"]
pub type DETACH_W<'a, const O: u8> = crate::BitWriter<'a, u32, DEVCTRL_SPEC, bool, O>;
#[doc = "Field `RMWKUP` reader - Remote Wake-Up"]
pub type RMWKUP_R = crate::BitReader<bool>;
#[doc = "Field `RMWKUP` writer - Remote Wake-Up"]
pub type RMWKUP_W<'a, const O: u8> = crate::BitWriter<'a, u32, DEVCTRL_SPEC, bool, O>;
#[doc = "Field `SPDCONF` reader - Mode Configuration"]
pub type SPDCONF_R = crate::FieldReader<u8, SPDCONFSELECT_A>;
#[doc = "Mode Configuration\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum SPDCONFSELECT_A {
#[doc = "0: The peripheral starts in Full-speed mode and performs a high-speed reset to switch to High-speed mode if the host is high-speed-capable."]
NORMAL = 0,
#[doc = "1: For a better consumption, if high speed is not needed."]
LOW_POWER = 1,
#[doc = "2: Forced high speed."]
HIGH_SPEED = 2,
#[doc = "3: The peripheral remains in Full-speed mode whatever the host speed capability."]
FORCED_FS = 3,
}
impl From<SPDCONFSELECT_A> for u8 {
#[inline(always)]
fn from(variant: SPDCONFSELECT_A) -> Self {
variant as _
}
}
impl SPDCONF_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> SPDCONFSELECT_A {
match self.bits {
0 => SPDCONFSELECT_A::NORMAL,
1 => SPDCONFSELECT_A::LOW_POWER,
2 => SPDCONFSELECT_A::HIGH_SPEED,
3 => SPDCONFSELECT_A::FORCED_FS,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `NORMAL`"]
#[inline(always)]
pub fn is_normal(&self) -> bool {
*self == SPDCONFSELECT_A::NORMAL
}
#[doc = "Checks if the value of the field is `LOW_POWER`"]
#[inline(always)]
pub fn is_low_power(&self) -> bool {
*self == SPDCONFSELECT_A::LOW_POWER
}
#[doc = "Checks if the value of the field is `HIGH_SPEED`"]
#[inline(always)]
pub fn is_high_speed(&self) -> bool {
*self == SPDCONFSELECT_A::HIGH_SPEED
}
#[doc = "Checks if the value of the field is `FORCED_FS`"]
#[inline(always)]
pub fn is_forced_fs(&self) -> bool {
*self == SPDCONFSELECT_A::FORCED_FS
}
}
#[doc = "Field `SPDCONF` writer - Mode Configuration"]
pub type SPDCONF_W<'a, const O: u8> =
crate::FieldWriterSafe<'a, u32, DEVCTRL_SPEC, u8, SPDCONFSELECT_A, 2, O>;
impl<'a, const O: u8> SPDCONF_W<'a, O> {
#[doc = "The peripheral starts in Full-speed mode and performs a high-speed reset to switch to High-speed mode if the host is high-speed-capable."]
#[inline(always)]
pub fn normal(self) -> &'a mut W {
self.variant(SPDCONFSELECT_A::NORMAL)
}
#[doc = "For a better consumption, if high speed is not needed."]
#[inline(always)]
pub fn low_power(self) -> &'a mut W {
self.variant(SPDCONFSELECT_A::LOW_POWER)
}
#[doc = "Forced high speed."]
#[inline(always)]
pub fn high_speed(self) -> &'a mut W {
self.variant(SPDCONFSELECT_A::HIGH_SPEED)
}
#[doc = "The peripheral remains in Full-speed mode whatever the host speed capability."]
#[inline(always)]
pub fn forced_fs(self) -> &'a mut W {
self.variant(SPDCONFSELECT_A::FORCED_FS)
}
}
#[doc = "Field `LS` reader - Low-Speed Mode Force"]
pub type LS_R = crate::BitReader<bool>;
#[doc = "Field `LS` writer - Low-Speed Mode Force"]
pub type LS_W<'a, const O: u8> = crate::BitWriter<'a, u32, DEVCTRL_SPEC, bool, O>;
#[doc = "Field `TSTJ` reader - Test mode J"]
pub type TSTJ_R = crate::BitReader<bool>;
#[doc = "Field `TSTJ` writer - Test mode J"]
pub type TSTJ_W<'a, const O: u8> = crate::BitWriter<'a, u32, DEVCTRL_SPEC, bool, O>;
#[doc = "Field `TSTK` reader - Test mode K"]
pub type TSTK_R = crate::BitReader<bool>;
#[doc = "Field `TSTK` writer - Test mode K"]
pub type TSTK_W<'a, const O: u8> = crate::BitWriter<'a, u32, DEVCTRL_SPEC, bool, O>;
#[doc = "Field `TSTPCKT` reader - Test packet mode"]
pub type TSTPCKT_R = crate::BitReader<bool>;
#[doc = "Field `TSTPCKT` writer - Test packet mode"]
pub type TSTPCKT_W<'a, const O: u8> = crate::BitWriter<'a, u32, DEVCTRL_SPEC, bool, O>;
#[doc = "Field `OPMODE2` reader - Specific Operational mode"]
pub type OPMODE2_R = crate::BitReader<bool>;
#[doc = "Field `OPMODE2` writer - Specific Operational mode"]
pub type OPMODE2_W<'a, const O: u8> = crate::BitWriter<'a, u32, DEVCTRL_SPEC, bool, O>;
impl R {
#[doc = "Bits 0:6 - USB Address"]
#[inline(always)]
pub fn uadd(&self) -> UADD_R {
UADD_R::new((self.bits & 0x7f) as u8)
}
#[doc = "Bit 7 - Address Enable"]
#[inline(always)]
pub fn adden(&self) -> ADDEN_R {
ADDEN_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - Detach"]
#[inline(always)]
pub fn detach(&self) -> DETACH_R {
DETACH_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - Remote Wake-Up"]
#[inline(always)]
pub fn rmwkup(&self) -> RMWKUP_R {
RMWKUP_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bits 10:11 - Mode Configuration"]
#[inline(always)]
pub fn spdconf(&self) -> SPDCONF_R {
SPDCONF_R::new(((self.bits >> 10) & 3) as u8)
}
#[doc = "Bit 12 - Low-Speed Mode Force"]
#[inline(always)]
pub fn ls(&self) -> LS_R {
LS_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 13 - Test mode J"]
#[inline(always)]
pub fn tstj(&self) -> TSTJ_R {
TSTJ_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 14 - Test mode K"]
#[inline(always)]
pub fn tstk(&self) -> TSTK_R {
TSTK_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15 - Test packet mode"]
#[inline(always)]
pub fn tstpckt(&self) -> TSTPCKT_R {
TSTPCKT_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16 - Specific Operational mode"]
#[inline(always)]
pub fn opmode2(&self) -> OPMODE2_R {
OPMODE2_R::new(((self.bits >> 16) & 1) != 0)
}
}
impl W {
#[doc = "Bits 0:6 - USB Address"]
#[inline(always)]
pub fn uadd(&mut self) -> UADD_W<0> {
UADD_W::new(self)
}
#[doc = "Bit 7 - Address Enable"]
#[inline(always)]
pub fn adden(&mut self) -> ADDEN_W<7> {
ADDEN_W::new(self)
}
#[doc = "Bit 8 - Detach"]
#[inline(always)]
pub fn detach(&mut self) -> DETACH_W<8> {
DETACH_W::new(self)
}
#[doc = "Bit 9 - Remote Wake-Up"]
#[inline(always)]
pub fn rmwkup(&mut self) -> RMWKUP_W<9> {
RMWKUP_W::new(self)
}
#[doc = "Bits 10:11 - Mode Configuration"]
#[inline(always)]
pub fn spdconf(&mut self) -> SPDCONF_W<10> {
SPDCONF_W::new(self)
}
#[doc = "Bit 12 - Low-Speed Mode Force"]
#[inline(always)]
pub fn ls(&mut self) -> LS_W<12> {
LS_W::new(self)
}
#[doc = "Bit 13 - Test mode J"]
#[inline(always)]
pub fn tstj(&mut self) -> TSTJ_W<13> {
TSTJ_W::new(self)
}
#[doc = "Bit 14 - Test mode K"]
#[inline(always)]
pub fn tstk(&mut self) -> TSTK_W<14> {
TSTK_W::new(self)
}
#[doc = "Bit 15 - Test packet mode"]
#[inline(always)]
pub fn tstpckt(&mut self) -> TSTPCKT_W<15> {
TSTPCKT_W::new(self)
}
#[doc = "Bit 16 - Specific Operational mode"]
#[inline(always)]
pub fn opmode2(&mut self) -> OPMODE2_W<16> {
OPMODE2_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "Device General Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [devctrl](index.html) module"]
pub struct DEVCTRL_SPEC;
impl crate::RegisterSpec for DEVCTRL_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [devctrl::R](R) reader structure"]
impl crate::Readable for DEVCTRL_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [devctrl::W](W) writer structure"]
impl crate::Writable for DEVCTRL_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets DEVCTRL to value 0"]
impl crate::Resettable for DEVCTRL_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}