atsaml21j16b/eic/
config.rs

1#[doc = "Register `CONFIG%s` reader"]
2pub struct R(crate::R<CONFIG_SPEC>);
3impl core::ops::Deref for R {
4    type Target = crate::R<CONFIG_SPEC>;
5    #[inline(always)]
6    fn deref(&self) -> &Self::Target {
7        &self.0
8    }
9}
10impl From<crate::R<CONFIG_SPEC>> for R {
11    #[inline(always)]
12    fn from(reader: crate::R<CONFIG_SPEC>) -> Self {
13        R(reader)
14    }
15}
16#[doc = "Register `CONFIG%s` writer"]
17pub struct W(crate::W<CONFIG_SPEC>);
18impl core::ops::Deref for W {
19    type Target = crate::W<CONFIG_SPEC>;
20    #[inline(always)]
21    fn deref(&self) -> &Self::Target {
22        &self.0
23    }
24}
25impl core::ops::DerefMut for W {
26    #[inline(always)]
27    fn deref_mut(&mut self) -> &mut Self::Target {
28        &mut self.0
29    }
30}
31impl From<crate::W<CONFIG_SPEC>> for W {
32    #[inline(always)]
33    fn from(writer: crate::W<CONFIG_SPEC>) -> Self {
34        W(writer)
35    }
36}
37#[doc = "Field `SENSE0` reader - Input Sense Configuration 0"]
38pub type SENSE0_R = crate::FieldReader<u8, SENSE0SELECT_A>;
39#[doc = "Input Sense Configuration 0\n\nValue on reset: 0"]
40#[derive(Clone, Copy, Debug, PartialEq, Eq)]
41#[repr(u8)]
42pub enum SENSE0SELECT_A {
43    #[doc = "0: No detection"]
44    NONE = 0,
45    #[doc = "1: Rising edge detection"]
46    RISE = 1,
47    #[doc = "2: Falling edge detection"]
48    FALL = 2,
49    #[doc = "3: Both edges detection"]
50    BOTH = 3,
51    #[doc = "4: High level detection"]
52    HIGH = 4,
53    #[doc = "5: Low level detection"]
54    LOW = 5,
55}
56impl From<SENSE0SELECT_A> for u8 {
57    #[inline(always)]
58    fn from(variant: SENSE0SELECT_A) -> Self {
59        variant as _
60    }
61}
62impl SENSE0_R {
63    #[doc = "Get enumerated values variant"]
64    #[inline(always)]
65    pub fn variant(&self) -> Option<SENSE0SELECT_A> {
66        match self.bits {
67            0 => Some(SENSE0SELECT_A::NONE),
68            1 => Some(SENSE0SELECT_A::RISE),
69            2 => Some(SENSE0SELECT_A::FALL),
70            3 => Some(SENSE0SELECT_A::BOTH),
71            4 => Some(SENSE0SELECT_A::HIGH),
72            5 => Some(SENSE0SELECT_A::LOW),
73            _ => None,
74        }
75    }
76    #[doc = "Checks if the value of the field is `NONE`"]
77    #[inline(always)]
78    pub fn is_none(&self) -> bool {
79        *self == SENSE0SELECT_A::NONE
80    }
81    #[doc = "Checks if the value of the field is `RISE`"]
82    #[inline(always)]
83    pub fn is_rise(&self) -> bool {
84        *self == SENSE0SELECT_A::RISE
85    }
86    #[doc = "Checks if the value of the field is `FALL`"]
87    #[inline(always)]
88    pub fn is_fall(&self) -> bool {
89        *self == SENSE0SELECT_A::FALL
90    }
91    #[doc = "Checks if the value of the field is `BOTH`"]
92    #[inline(always)]
93    pub fn is_both(&self) -> bool {
94        *self == SENSE0SELECT_A::BOTH
95    }
96    #[doc = "Checks if the value of the field is `HIGH`"]
97    #[inline(always)]
98    pub fn is_high(&self) -> bool {
99        *self == SENSE0SELECT_A::HIGH
100    }
101    #[doc = "Checks if the value of the field is `LOW`"]
102    #[inline(always)]
103    pub fn is_low(&self) -> bool {
104        *self == SENSE0SELECT_A::LOW
105    }
106}
107#[doc = "Field `SENSE0` writer - Input Sense Configuration 0"]
108pub type SENSE0_W<'a, const O: u8> =
109    crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, SENSE0SELECT_A, 3, O>;
110impl<'a, const O: u8> SENSE0_W<'a, O> {
111    #[doc = "No detection"]
112    #[inline(always)]
113    pub fn none(self) -> &'a mut W {
114        self.variant(SENSE0SELECT_A::NONE)
115    }
116    #[doc = "Rising edge detection"]
117    #[inline(always)]
118    pub fn rise(self) -> &'a mut W {
119        self.variant(SENSE0SELECT_A::RISE)
120    }
121    #[doc = "Falling edge detection"]
122    #[inline(always)]
123    pub fn fall(self) -> &'a mut W {
124        self.variant(SENSE0SELECT_A::FALL)
125    }
126    #[doc = "Both edges detection"]
127    #[inline(always)]
128    pub fn both(self) -> &'a mut W {
129        self.variant(SENSE0SELECT_A::BOTH)
130    }
131    #[doc = "High level detection"]
132    #[inline(always)]
133    pub fn high(self) -> &'a mut W {
134        self.variant(SENSE0SELECT_A::HIGH)
135    }
136    #[doc = "Low level detection"]
137    #[inline(always)]
138    pub fn low(self) -> &'a mut W {
139        self.variant(SENSE0SELECT_A::LOW)
140    }
141}
142#[doc = "Field `FILTEN0` reader - Filter Enable 0"]
143pub type FILTEN0_R = crate::BitReader<bool>;
144#[doc = "Field `FILTEN0` writer - Filter Enable 0"]
145pub type FILTEN0_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
146#[doc = "Field `SENSE1` reader - Input Sense Configuration 1"]
147pub type SENSE1_R = crate::FieldReader<u8, SENSE1SELECT_A>;
148#[doc = "Input Sense Configuration 1\n\nValue on reset: 0"]
149#[derive(Clone, Copy, Debug, PartialEq, Eq)]
150#[repr(u8)]
151pub enum SENSE1SELECT_A {
152    #[doc = "0: No detection"]
153    NONE = 0,
154    #[doc = "1: Rising edge detection"]
155    RISE = 1,
156    #[doc = "2: Falling edge detection"]
157    FALL = 2,
158    #[doc = "3: Both edges detection"]
159    BOTH = 3,
160    #[doc = "4: High level detection"]
161    HIGH = 4,
162    #[doc = "5: Low level detection"]
163    LOW = 5,
164}
165impl From<SENSE1SELECT_A> for u8 {
166    #[inline(always)]
167    fn from(variant: SENSE1SELECT_A) -> Self {
168        variant as _
169    }
170}
171impl SENSE1_R {
172    #[doc = "Get enumerated values variant"]
173    #[inline(always)]
174    pub fn variant(&self) -> Option<SENSE1SELECT_A> {
175        match self.bits {
176            0 => Some(SENSE1SELECT_A::NONE),
177            1 => Some(SENSE1SELECT_A::RISE),
178            2 => Some(SENSE1SELECT_A::FALL),
179            3 => Some(SENSE1SELECT_A::BOTH),
180            4 => Some(SENSE1SELECT_A::HIGH),
181            5 => Some(SENSE1SELECT_A::LOW),
182            _ => None,
183        }
184    }
185    #[doc = "Checks if the value of the field is `NONE`"]
186    #[inline(always)]
187    pub fn is_none(&self) -> bool {
188        *self == SENSE1SELECT_A::NONE
189    }
190    #[doc = "Checks if the value of the field is `RISE`"]
191    #[inline(always)]
192    pub fn is_rise(&self) -> bool {
193        *self == SENSE1SELECT_A::RISE
194    }
195    #[doc = "Checks if the value of the field is `FALL`"]
196    #[inline(always)]
197    pub fn is_fall(&self) -> bool {
198        *self == SENSE1SELECT_A::FALL
199    }
200    #[doc = "Checks if the value of the field is `BOTH`"]
201    #[inline(always)]
202    pub fn is_both(&self) -> bool {
203        *self == SENSE1SELECT_A::BOTH
204    }
205    #[doc = "Checks if the value of the field is `HIGH`"]
206    #[inline(always)]
207    pub fn is_high(&self) -> bool {
208        *self == SENSE1SELECT_A::HIGH
209    }
210    #[doc = "Checks if the value of the field is `LOW`"]
211    #[inline(always)]
212    pub fn is_low(&self) -> bool {
213        *self == SENSE1SELECT_A::LOW
214    }
215}
216#[doc = "Field `SENSE1` writer - Input Sense Configuration 1"]
217pub type SENSE1_W<'a, const O: u8> =
218    crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, SENSE1SELECT_A, 3, O>;
219impl<'a, const O: u8> SENSE1_W<'a, O> {
220    #[doc = "No detection"]
221    #[inline(always)]
222    pub fn none(self) -> &'a mut W {
223        self.variant(SENSE1SELECT_A::NONE)
224    }
225    #[doc = "Rising edge detection"]
226    #[inline(always)]
227    pub fn rise(self) -> &'a mut W {
228        self.variant(SENSE1SELECT_A::RISE)
229    }
230    #[doc = "Falling edge detection"]
231    #[inline(always)]
232    pub fn fall(self) -> &'a mut W {
233        self.variant(SENSE1SELECT_A::FALL)
234    }
235    #[doc = "Both edges detection"]
236    #[inline(always)]
237    pub fn both(self) -> &'a mut W {
238        self.variant(SENSE1SELECT_A::BOTH)
239    }
240    #[doc = "High level detection"]
241    #[inline(always)]
242    pub fn high(self) -> &'a mut W {
243        self.variant(SENSE1SELECT_A::HIGH)
244    }
245    #[doc = "Low level detection"]
246    #[inline(always)]
247    pub fn low(self) -> &'a mut W {
248        self.variant(SENSE1SELECT_A::LOW)
249    }
250}
251#[doc = "Field `FILTEN1` reader - Filter Enable 1"]
252pub type FILTEN1_R = crate::BitReader<bool>;
253#[doc = "Field `FILTEN1` writer - Filter Enable 1"]
254pub type FILTEN1_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
255#[doc = "Field `SENSE2` reader - Input Sense Configuration 2"]
256pub type SENSE2_R = crate::FieldReader<u8, SENSE2SELECT_A>;
257#[doc = "Input Sense Configuration 2\n\nValue on reset: 0"]
258#[derive(Clone, Copy, Debug, PartialEq, Eq)]
259#[repr(u8)]
260pub enum SENSE2SELECT_A {
261    #[doc = "0: No detection"]
262    NONE = 0,
263    #[doc = "1: Rising edge detection"]
264    RISE = 1,
265    #[doc = "2: Falling edge detection"]
266    FALL = 2,
267    #[doc = "3: Both edges detection"]
268    BOTH = 3,
269    #[doc = "4: High level detection"]
270    HIGH = 4,
271    #[doc = "5: Low level detection"]
272    LOW = 5,
273}
274impl From<SENSE2SELECT_A> for u8 {
275    #[inline(always)]
276    fn from(variant: SENSE2SELECT_A) -> Self {
277        variant as _
278    }
279}
280impl SENSE2_R {
281    #[doc = "Get enumerated values variant"]
282    #[inline(always)]
283    pub fn variant(&self) -> Option<SENSE2SELECT_A> {
284        match self.bits {
285            0 => Some(SENSE2SELECT_A::NONE),
286            1 => Some(SENSE2SELECT_A::RISE),
287            2 => Some(SENSE2SELECT_A::FALL),
288            3 => Some(SENSE2SELECT_A::BOTH),
289            4 => Some(SENSE2SELECT_A::HIGH),
290            5 => Some(SENSE2SELECT_A::LOW),
291            _ => None,
292        }
293    }
294    #[doc = "Checks if the value of the field is `NONE`"]
295    #[inline(always)]
296    pub fn is_none(&self) -> bool {
297        *self == SENSE2SELECT_A::NONE
298    }
299    #[doc = "Checks if the value of the field is `RISE`"]
300    #[inline(always)]
301    pub fn is_rise(&self) -> bool {
302        *self == SENSE2SELECT_A::RISE
303    }
304    #[doc = "Checks if the value of the field is `FALL`"]
305    #[inline(always)]
306    pub fn is_fall(&self) -> bool {
307        *self == SENSE2SELECT_A::FALL
308    }
309    #[doc = "Checks if the value of the field is `BOTH`"]
310    #[inline(always)]
311    pub fn is_both(&self) -> bool {
312        *self == SENSE2SELECT_A::BOTH
313    }
314    #[doc = "Checks if the value of the field is `HIGH`"]
315    #[inline(always)]
316    pub fn is_high(&self) -> bool {
317        *self == SENSE2SELECT_A::HIGH
318    }
319    #[doc = "Checks if the value of the field is `LOW`"]
320    #[inline(always)]
321    pub fn is_low(&self) -> bool {
322        *self == SENSE2SELECT_A::LOW
323    }
324}
325#[doc = "Field `SENSE2` writer - Input Sense Configuration 2"]
326pub type SENSE2_W<'a, const O: u8> =
327    crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, SENSE2SELECT_A, 3, O>;
328impl<'a, const O: u8> SENSE2_W<'a, O> {
329    #[doc = "No detection"]
330    #[inline(always)]
331    pub fn none(self) -> &'a mut W {
332        self.variant(SENSE2SELECT_A::NONE)
333    }
334    #[doc = "Rising edge detection"]
335    #[inline(always)]
336    pub fn rise(self) -> &'a mut W {
337        self.variant(SENSE2SELECT_A::RISE)
338    }
339    #[doc = "Falling edge detection"]
340    #[inline(always)]
341    pub fn fall(self) -> &'a mut W {
342        self.variant(SENSE2SELECT_A::FALL)
343    }
344    #[doc = "Both edges detection"]
345    #[inline(always)]
346    pub fn both(self) -> &'a mut W {
347        self.variant(SENSE2SELECT_A::BOTH)
348    }
349    #[doc = "High level detection"]
350    #[inline(always)]
351    pub fn high(self) -> &'a mut W {
352        self.variant(SENSE2SELECT_A::HIGH)
353    }
354    #[doc = "Low level detection"]
355    #[inline(always)]
356    pub fn low(self) -> &'a mut W {
357        self.variant(SENSE2SELECT_A::LOW)
358    }
359}
360#[doc = "Field `FILTEN2` reader - Filter Enable 2"]
361pub type FILTEN2_R = crate::BitReader<bool>;
362#[doc = "Field `FILTEN2` writer - Filter Enable 2"]
363pub type FILTEN2_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
364#[doc = "Field `SENSE3` reader - Input Sense Configuration 3"]
365pub type SENSE3_R = crate::FieldReader<u8, SENSE3SELECT_A>;
366#[doc = "Input Sense Configuration 3\n\nValue on reset: 0"]
367#[derive(Clone, Copy, Debug, PartialEq, Eq)]
368#[repr(u8)]
369pub enum SENSE3SELECT_A {
370    #[doc = "0: No detection"]
371    NONE = 0,
372    #[doc = "1: Rising edge detection"]
373    RISE = 1,
374    #[doc = "2: Falling edge detection"]
375    FALL = 2,
376    #[doc = "3: Both edges detection"]
377    BOTH = 3,
378    #[doc = "4: High level detection"]
379    HIGH = 4,
380    #[doc = "5: Low level detection"]
381    LOW = 5,
382}
383impl From<SENSE3SELECT_A> for u8 {
384    #[inline(always)]
385    fn from(variant: SENSE3SELECT_A) -> Self {
386        variant as _
387    }
388}
389impl SENSE3_R {
390    #[doc = "Get enumerated values variant"]
391    #[inline(always)]
392    pub fn variant(&self) -> Option<SENSE3SELECT_A> {
393        match self.bits {
394            0 => Some(SENSE3SELECT_A::NONE),
395            1 => Some(SENSE3SELECT_A::RISE),
396            2 => Some(SENSE3SELECT_A::FALL),
397            3 => Some(SENSE3SELECT_A::BOTH),
398            4 => Some(SENSE3SELECT_A::HIGH),
399            5 => Some(SENSE3SELECT_A::LOW),
400            _ => None,
401        }
402    }
403    #[doc = "Checks if the value of the field is `NONE`"]
404    #[inline(always)]
405    pub fn is_none(&self) -> bool {
406        *self == SENSE3SELECT_A::NONE
407    }
408    #[doc = "Checks if the value of the field is `RISE`"]
409    #[inline(always)]
410    pub fn is_rise(&self) -> bool {
411        *self == SENSE3SELECT_A::RISE
412    }
413    #[doc = "Checks if the value of the field is `FALL`"]
414    #[inline(always)]
415    pub fn is_fall(&self) -> bool {
416        *self == SENSE3SELECT_A::FALL
417    }
418    #[doc = "Checks if the value of the field is `BOTH`"]
419    #[inline(always)]
420    pub fn is_both(&self) -> bool {
421        *self == SENSE3SELECT_A::BOTH
422    }
423    #[doc = "Checks if the value of the field is `HIGH`"]
424    #[inline(always)]
425    pub fn is_high(&self) -> bool {
426        *self == SENSE3SELECT_A::HIGH
427    }
428    #[doc = "Checks if the value of the field is `LOW`"]
429    #[inline(always)]
430    pub fn is_low(&self) -> bool {
431        *self == SENSE3SELECT_A::LOW
432    }
433}
434#[doc = "Field `SENSE3` writer - Input Sense Configuration 3"]
435pub type SENSE3_W<'a, const O: u8> =
436    crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, SENSE3SELECT_A, 3, O>;
437impl<'a, const O: u8> SENSE3_W<'a, O> {
438    #[doc = "No detection"]
439    #[inline(always)]
440    pub fn none(self) -> &'a mut W {
441        self.variant(SENSE3SELECT_A::NONE)
442    }
443    #[doc = "Rising edge detection"]
444    #[inline(always)]
445    pub fn rise(self) -> &'a mut W {
446        self.variant(SENSE3SELECT_A::RISE)
447    }
448    #[doc = "Falling edge detection"]
449    #[inline(always)]
450    pub fn fall(self) -> &'a mut W {
451        self.variant(SENSE3SELECT_A::FALL)
452    }
453    #[doc = "Both edges detection"]
454    #[inline(always)]
455    pub fn both(self) -> &'a mut W {
456        self.variant(SENSE3SELECT_A::BOTH)
457    }
458    #[doc = "High level detection"]
459    #[inline(always)]
460    pub fn high(self) -> &'a mut W {
461        self.variant(SENSE3SELECT_A::HIGH)
462    }
463    #[doc = "Low level detection"]
464    #[inline(always)]
465    pub fn low(self) -> &'a mut W {
466        self.variant(SENSE3SELECT_A::LOW)
467    }
468}
469#[doc = "Field `FILTEN3` reader - Filter Enable 3"]
470pub type FILTEN3_R = crate::BitReader<bool>;
471#[doc = "Field `FILTEN3` writer - Filter Enable 3"]
472pub type FILTEN3_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
473#[doc = "Field `SENSE4` reader - Input Sense Configuration 4"]
474pub type SENSE4_R = crate::FieldReader<u8, SENSE4SELECT_A>;
475#[doc = "Input Sense Configuration 4\n\nValue on reset: 0"]
476#[derive(Clone, Copy, Debug, PartialEq, Eq)]
477#[repr(u8)]
478pub enum SENSE4SELECT_A {
479    #[doc = "0: No detection"]
480    NONE = 0,
481    #[doc = "1: Rising edge detection"]
482    RISE = 1,
483    #[doc = "2: Falling edge detection"]
484    FALL = 2,
485    #[doc = "3: Both edges detection"]
486    BOTH = 3,
487    #[doc = "4: High level detection"]
488    HIGH = 4,
489    #[doc = "5: Low level detection"]
490    LOW = 5,
491}
492impl From<SENSE4SELECT_A> for u8 {
493    #[inline(always)]
494    fn from(variant: SENSE4SELECT_A) -> Self {
495        variant as _
496    }
497}
498impl SENSE4_R {
499    #[doc = "Get enumerated values variant"]
500    #[inline(always)]
501    pub fn variant(&self) -> Option<SENSE4SELECT_A> {
502        match self.bits {
503            0 => Some(SENSE4SELECT_A::NONE),
504            1 => Some(SENSE4SELECT_A::RISE),
505            2 => Some(SENSE4SELECT_A::FALL),
506            3 => Some(SENSE4SELECT_A::BOTH),
507            4 => Some(SENSE4SELECT_A::HIGH),
508            5 => Some(SENSE4SELECT_A::LOW),
509            _ => None,
510        }
511    }
512    #[doc = "Checks if the value of the field is `NONE`"]
513    #[inline(always)]
514    pub fn is_none(&self) -> bool {
515        *self == SENSE4SELECT_A::NONE
516    }
517    #[doc = "Checks if the value of the field is `RISE`"]
518    #[inline(always)]
519    pub fn is_rise(&self) -> bool {
520        *self == SENSE4SELECT_A::RISE
521    }
522    #[doc = "Checks if the value of the field is `FALL`"]
523    #[inline(always)]
524    pub fn is_fall(&self) -> bool {
525        *self == SENSE4SELECT_A::FALL
526    }
527    #[doc = "Checks if the value of the field is `BOTH`"]
528    #[inline(always)]
529    pub fn is_both(&self) -> bool {
530        *self == SENSE4SELECT_A::BOTH
531    }
532    #[doc = "Checks if the value of the field is `HIGH`"]
533    #[inline(always)]
534    pub fn is_high(&self) -> bool {
535        *self == SENSE4SELECT_A::HIGH
536    }
537    #[doc = "Checks if the value of the field is `LOW`"]
538    #[inline(always)]
539    pub fn is_low(&self) -> bool {
540        *self == SENSE4SELECT_A::LOW
541    }
542}
543#[doc = "Field `SENSE4` writer - Input Sense Configuration 4"]
544pub type SENSE4_W<'a, const O: u8> =
545    crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, SENSE4SELECT_A, 3, O>;
546impl<'a, const O: u8> SENSE4_W<'a, O> {
547    #[doc = "No detection"]
548    #[inline(always)]
549    pub fn none(self) -> &'a mut W {
550        self.variant(SENSE4SELECT_A::NONE)
551    }
552    #[doc = "Rising edge detection"]
553    #[inline(always)]
554    pub fn rise(self) -> &'a mut W {
555        self.variant(SENSE4SELECT_A::RISE)
556    }
557    #[doc = "Falling edge detection"]
558    #[inline(always)]
559    pub fn fall(self) -> &'a mut W {
560        self.variant(SENSE4SELECT_A::FALL)
561    }
562    #[doc = "Both edges detection"]
563    #[inline(always)]
564    pub fn both(self) -> &'a mut W {
565        self.variant(SENSE4SELECT_A::BOTH)
566    }
567    #[doc = "High level detection"]
568    #[inline(always)]
569    pub fn high(self) -> &'a mut W {
570        self.variant(SENSE4SELECT_A::HIGH)
571    }
572    #[doc = "Low level detection"]
573    #[inline(always)]
574    pub fn low(self) -> &'a mut W {
575        self.variant(SENSE4SELECT_A::LOW)
576    }
577}
578#[doc = "Field `FILTEN4` reader - Filter Enable 4"]
579pub type FILTEN4_R = crate::BitReader<bool>;
580#[doc = "Field `FILTEN4` writer - Filter Enable 4"]
581pub type FILTEN4_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
582#[doc = "Field `SENSE5` reader - Input Sense Configuration 5"]
583pub type SENSE5_R = crate::FieldReader<u8, SENSE5SELECT_A>;
584#[doc = "Input Sense Configuration 5\n\nValue on reset: 0"]
585#[derive(Clone, Copy, Debug, PartialEq, Eq)]
586#[repr(u8)]
587pub enum SENSE5SELECT_A {
588    #[doc = "0: No detection"]
589    NONE = 0,
590    #[doc = "1: Rising edge detection"]
591    RISE = 1,
592    #[doc = "2: Falling edge detection"]
593    FALL = 2,
594    #[doc = "3: Both edges detection"]
595    BOTH = 3,
596    #[doc = "4: High level detection"]
597    HIGH = 4,
598    #[doc = "5: Low level detection"]
599    LOW = 5,
600}
601impl From<SENSE5SELECT_A> for u8 {
602    #[inline(always)]
603    fn from(variant: SENSE5SELECT_A) -> Self {
604        variant as _
605    }
606}
607impl SENSE5_R {
608    #[doc = "Get enumerated values variant"]
609    #[inline(always)]
610    pub fn variant(&self) -> Option<SENSE5SELECT_A> {
611        match self.bits {
612            0 => Some(SENSE5SELECT_A::NONE),
613            1 => Some(SENSE5SELECT_A::RISE),
614            2 => Some(SENSE5SELECT_A::FALL),
615            3 => Some(SENSE5SELECT_A::BOTH),
616            4 => Some(SENSE5SELECT_A::HIGH),
617            5 => Some(SENSE5SELECT_A::LOW),
618            _ => None,
619        }
620    }
621    #[doc = "Checks if the value of the field is `NONE`"]
622    #[inline(always)]
623    pub fn is_none(&self) -> bool {
624        *self == SENSE5SELECT_A::NONE
625    }
626    #[doc = "Checks if the value of the field is `RISE`"]
627    #[inline(always)]
628    pub fn is_rise(&self) -> bool {
629        *self == SENSE5SELECT_A::RISE
630    }
631    #[doc = "Checks if the value of the field is `FALL`"]
632    #[inline(always)]
633    pub fn is_fall(&self) -> bool {
634        *self == SENSE5SELECT_A::FALL
635    }
636    #[doc = "Checks if the value of the field is `BOTH`"]
637    #[inline(always)]
638    pub fn is_both(&self) -> bool {
639        *self == SENSE5SELECT_A::BOTH
640    }
641    #[doc = "Checks if the value of the field is `HIGH`"]
642    #[inline(always)]
643    pub fn is_high(&self) -> bool {
644        *self == SENSE5SELECT_A::HIGH
645    }
646    #[doc = "Checks if the value of the field is `LOW`"]
647    #[inline(always)]
648    pub fn is_low(&self) -> bool {
649        *self == SENSE5SELECT_A::LOW
650    }
651}
652#[doc = "Field `SENSE5` writer - Input Sense Configuration 5"]
653pub type SENSE5_W<'a, const O: u8> =
654    crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, SENSE5SELECT_A, 3, O>;
655impl<'a, const O: u8> SENSE5_W<'a, O> {
656    #[doc = "No detection"]
657    #[inline(always)]
658    pub fn none(self) -> &'a mut W {
659        self.variant(SENSE5SELECT_A::NONE)
660    }
661    #[doc = "Rising edge detection"]
662    #[inline(always)]
663    pub fn rise(self) -> &'a mut W {
664        self.variant(SENSE5SELECT_A::RISE)
665    }
666    #[doc = "Falling edge detection"]
667    #[inline(always)]
668    pub fn fall(self) -> &'a mut W {
669        self.variant(SENSE5SELECT_A::FALL)
670    }
671    #[doc = "Both edges detection"]
672    #[inline(always)]
673    pub fn both(self) -> &'a mut W {
674        self.variant(SENSE5SELECT_A::BOTH)
675    }
676    #[doc = "High level detection"]
677    #[inline(always)]
678    pub fn high(self) -> &'a mut W {
679        self.variant(SENSE5SELECT_A::HIGH)
680    }
681    #[doc = "Low level detection"]
682    #[inline(always)]
683    pub fn low(self) -> &'a mut W {
684        self.variant(SENSE5SELECT_A::LOW)
685    }
686}
687#[doc = "Field `FILTEN5` reader - Filter Enable 5"]
688pub type FILTEN5_R = crate::BitReader<bool>;
689#[doc = "Field `FILTEN5` writer - Filter Enable 5"]
690pub type FILTEN5_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
691#[doc = "Field `SENSE6` reader - Input Sense Configuration 6"]
692pub type SENSE6_R = crate::FieldReader<u8, SENSE6SELECT_A>;
693#[doc = "Input Sense Configuration 6\n\nValue on reset: 0"]
694#[derive(Clone, Copy, Debug, PartialEq, Eq)]
695#[repr(u8)]
696pub enum SENSE6SELECT_A {
697    #[doc = "0: No detection"]
698    NONE = 0,
699    #[doc = "1: Rising edge detection"]
700    RISE = 1,
701    #[doc = "2: Falling edge detection"]
702    FALL = 2,
703    #[doc = "3: Both edges detection"]
704    BOTH = 3,
705    #[doc = "4: High level detection"]
706    HIGH = 4,
707    #[doc = "5: Low level detection"]
708    LOW = 5,
709}
710impl From<SENSE6SELECT_A> for u8 {
711    #[inline(always)]
712    fn from(variant: SENSE6SELECT_A) -> Self {
713        variant as _
714    }
715}
716impl SENSE6_R {
717    #[doc = "Get enumerated values variant"]
718    #[inline(always)]
719    pub fn variant(&self) -> Option<SENSE6SELECT_A> {
720        match self.bits {
721            0 => Some(SENSE6SELECT_A::NONE),
722            1 => Some(SENSE6SELECT_A::RISE),
723            2 => Some(SENSE6SELECT_A::FALL),
724            3 => Some(SENSE6SELECT_A::BOTH),
725            4 => Some(SENSE6SELECT_A::HIGH),
726            5 => Some(SENSE6SELECT_A::LOW),
727            _ => None,
728        }
729    }
730    #[doc = "Checks if the value of the field is `NONE`"]
731    #[inline(always)]
732    pub fn is_none(&self) -> bool {
733        *self == SENSE6SELECT_A::NONE
734    }
735    #[doc = "Checks if the value of the field is `RISE`"]
736    #[inline(always)]
737    pub fn is_rise(&self) -> bool {
738        *self == SENSE6SELECT_A::RISE
739    }
740    #[doc = "Checks if the value of the field is `FALL`"]
741    #[inline(always)]
742    pub fn is_fall(&self) -> bool {
743        *self == SENSE6SELECT_A::FALL
744    }
745    #[doc = "Checks if the value of the field is `BOTH`"]
746    #[inline(always)]
747    pub fn is_both(&self) -> bool {
748        *self == SENSE6SELECT_A::BOTH
749    }
750    #[doc = "Checks if the value of the field is `HIGH`"]
751    #[inline(always)]
752    pub fn is_high(&self) -> bool {
753        *self == SENSE6SELECT_A::HIGH
754    }
755    #[doc = "Checks if the value of the field is `LOW`"]
756    #[inline(always)]
757    pub fn is_low(&self) -> bool {
758        *self == SENSE6SELECT_A::LOW
759    }
760}
761#[doc = "Field `SENSE6` writer - Input Sense Configuration 6"]
762pub type SENSE6_W<'a, const O: u8> =
763    crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, SENSE6SELECT_A, 3, O>;
764impl<'a, const O: u8> SENSE6_W<'a, O> {
765    #[doc = "No detection"]
766    #[inline(always)]
767    pub fn none(self) -> &'a mut W {
768        self.variant(SENSE6SELECT_A::NONE)
769    }
770    #[doc = "Rising edge detection"]
771    #[inline(always)]
772    pub fn rise(self) -> &'a mut W {
773        self.variant(SENSE6SELECT_A::RISE)
774    }
775    #[doc = "Falling edge detection"]
776    #[inline(always)]
777    pub fn fall(self) -> &'a mut W {
778        self.variant(SENSE6SELECT_A::FALL)
779    }
780    #[doc = "Both edges detection"]
781    #[inline(always)]
782    pub fn both(self) -> &'a mut W {
783        self.variant(SENSE6SELECT_A::BOTH)
784    }
785    #[doc = "High level detection"]
786    #[inline(always)]
787    pub fn high(self) -> &'a mut W {
788        self.variant(SENSE6SELECT_A::HIGH)
789    }
790    #[doc = "Low level detection"]
791    #[inline(always)]
792    pub fn low(self) -> &'a mut W {
793        self.variant(SENSE6SELECT_A::LOW)
794    }
795}
796#[doc = "Field `FILTEN6` reader - Filter Enable 6"]
797pub type FILTEN6_R = crate::BitReader<bool>;
798#[doc = "Field `FILTEN6` writer - Filter Enable 6"]
799pub type FILTEN6_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
800#[doc = "Field `SENSE7` reader - Input Sense Configuration 7"]
801pub type SENSE7_R = crate::FieldReader<u8, SENSE7SELECT_A>;
802#[doc = "Input Sense Configuration 7\n\nValue on reset: 0"]
803#[derive(Clone, Copy, Debug, PartialEq, Eq)]
804#[repr(u8)]
805pub enum SENSE7SELECT_A {
806    #[doc = "0: No detection"]
807    NONE = 0,
808    #[doc = "1: Rising edge detection"]
809    RISE = 1,
810    #[doc = "2: Falling edge detection"]
811    FALL = 2,
812    #[doc = "3: Both edges detection"]
813    BOTH = 3,
814    #[doc = "4: High level detection"]
815    HIGH = 4,
816    #[doc = "5: Low level detection"]
817    LOW = 5,
818}
819impl From<SENSE7SELECT_A> for u8 {
820    #[inline(always)]
821    fn from(variant: SENSE7SELECT_A) -> Self {
822        variant as _
823    }
824}
825impl SENSE7_R {
826    #[doc = "Get enumerated values variant"]
827    #[inline(always)]
828    pub fn variant(&self) -> Option<SENSE7SELECT_A> {
829        match self.bits {
830            0 => Some(SENSE7SELECT_A::NONE),
831            1 => Some(SENSE7SELECT_A::RISE),
832            2 => Some(SENSE7SELECT_A::FALL),
833            3 => Some(SENSE7SELECT_A::BOTH),
834            4 => Some(SENSE7SELECT_A::HIGH),
835            5 => Some(SENSE7SELECT_A::LOW),
836            _ => None,
837        }
838    }
839    #[doc = "Checks if the value of the field is `NONE`"]
840    #[inline(always)]
841    pub fn is_none(&self) -> bool {
842        *self == SENSE7SELECT_A::NONE
843    }
844    #[doc = "Checks if the value of the field is `RISE`"]
845    #[inline(always)]
846    pub fn is_rise(&self) -> bool {
847        *self == SENSE7SELECT_A::RISE
848    }
849    #[doc = "Checks if the value of the field is `FALL`"]
850    #[inline(always)]
851    pub fn is_fall(&self) -> bool {
852        *self == SENSE7SELECT_A::FALL
853    }
854    #[doc = "Checks if the value of the field is `BOTH`"]
855    #[inline(always)]
856    pub fn is_both(&self) -> bool {
857        *self == SENSE7SELECT_A::BOTH
858    }
859    #[doc = "Checks if the value of the field is `HIGH`"]
860    #[inline(always)]
861    pub fn is_high(&self) -> bool {
862        *self == SENSE7SELECT_A::HIGH
863    }
864    #[doc = "Checks if the value of the field is `LOW`"]
865    #[inline(always)]
866    pub fn is_low(&self) -> bool {
867        *self == SENSE7SELECT_A::LOW
868    }
869}
870#[doc = "Field `SENSE7` writer - Input Sense Configuration 7"]
871pub type SENSE7_W<'a, const O: u8> =
872    crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, SENSE7SELECT_A, 3, O>;
873impl<'a, const O: u8> SENSE7_W<'a, O> {
874    #[doc = "No detection"]
875    #[inline(always)]
876    pub fn none(self) -> &'a mut W {
877        self.variant(SENSE7SELECT_A::NONE)
878    }
879    #[doc = "Rising edge detection"]
880    #[inline(always)]
881    pub fn rise(self) -> &'a mut W {
882        self.variant(SENSE7SELECT_A::RISE)
883    }
884    #[doc = "Falling edge detection"]
885    #[inline(always)]
886    pub fn fall(self) -> &'a mut W {
887        self.variant(SENSE7SELECT_A::FALL)
888    }
889    #[doc = "Both edges detection"]
890    #[inline(always)]
891    pub fn both(self) -> &'a mut W {
892        self.variant(SENSE7SELECT_A::BOTH)
893    }
894    #[doc = "High level detection"]
895    #[inline(always)]
896    pub fn high(self) -> &'a mut W {
897        self.variant(SENSE7SELECT_A::HIGH)
898    }
899    #[doc = "Low level detection"]
900    #[inline(always)]
901    pub fn low(self) -> &'a mut W {
902        self.variant(SENSE7SELECT_A::LOW)
903    }
904}
905#[doc = "Field `FILTEN7` reader - Filter Enable 7"]
906pub type FILTEN7_R = crate::BitReader<bool>;
907#[doc = "Field `FILTEN7` writer - Filter Enable 7"]
908pub type FILTEN7_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
909impl R {
910    #[doc = "Bits 0:2 - Input Sense Configuration 0"]
911    #[inline(always)]
912    pub fn sense0(&self) -> SENSE0_R {
913        SENSE0_R::new((self.bits & 7) as u8)
914    }
915    #[doc = "Bit 3 - Filter Enable 0"]
916    #[inline(always)]
917    pub fn filten0(&self) -> FILTEN0_R {
918        FILTEN0_R::new(((self.bits >> 3) & 1) != 0)
919    }
920    #[doc = "Bits 4:6 - Input Sense Configuration 1"]
921    #[inline(always)]
922    pub fn sense1(&self) -> SENSE1_R {
923        SENSE1_R::new(((self.bits >> 4) & 7) as u8)
924    }
925    #[doc = "Bit 7 - Filter Enable 1"]
926    #[inline(always)]
927    pub fn filten1(&self) -> FILTEN1_R {
928        FILTEN1_R::new(((self.bits >> 7) & 1) != 0)
929    }
930    #[doc = "Bits 8:10 - Input Sense Configuration 2"]
931    #[inline(always)]
932    pub fn sense2(&self) -> SENSE2_R {
933        SENSE2_R::new(((self.bits >> 8) & 7) as u8)
934    }
935    #[doc = "Bit 11 - Filter Enable 2"]
936    #[inline(always)]
937    pub fn filten2(&self) -> FILTEN2_R {
938        FILTEN2_R::new(((self.bits >> 11) & 1) != 0)
939    }
940    #[doc = "Bits 12:14 - Input Sense Configuration 3"]
941    #[inline(always)]
942    pub fn sense3(&self) -> SENSE3_R {
943        SENSE3_R::new(((self.bits >> 12) & 7) as u8)
944    }
945    #[doc = "Bit 15 - Filter Enable 3"]
946    #[inline(always)]
947    pub fn filten3(&self) -> FILTEN3_R {
948        FILTEN3_R::new(((self.bits >> 15) & 1) != 0)
949    }
950    #[doc = "Bits 16:18 - Input Sense Configuration 4"]
951    #[inline(always)]
952    pub fn sense4(&self) -> SENSE4_R {
953        SENSE4_R::new(((self.bits >> 16) & 7) as u8)
954    }
955    #[doc = "Bit 19 - Filter Enable 4"]
956    #[inline(always)]
957    pub fn filten4(&self) -> FILTEN4_R {
958        FILTEN4_R::new(((self.bits >> 19) & 1) != 0)
959    }
960    #[doc = "Bits 20:22 - Input Sense Configuration 5"]
961    #[inline(always)]
962    pub fn sense5(&self) -> SENSE5_R {
963        SENSE5_R::new(((self.bits >> 20) & 7) as u8)
964    }
965    #[doc = "Bit 23 - Filter Enable 5"]
966    #[inline(always)]
967    pub fn filten5(&self) -> FILTEN5_R {
968        FILTEN5_R::new(((self.bits >> 23) & 1) != 0)
969    }
970    #[doc = "Bits 24:26 - Input Sense Configuration 6"]
971    #[inline(always)]
972    pub fn sense6(&self) -> SENSE6_R {
973        SENSE6_R::new(((self.bits >> 24) & 7) as u8)
974    }
975    #[doc = "Bit 27 - Filter Enable 6"]
976    #[inline(always)]
977    pub fn filten6(&self) -> FILTEN6_R {
978        FILTEN6_R::new(((self.bits >> 27) & 1) != 0)
979    }
980    #[doc = "Bits 28:30 - Input Sense Configuration 7"]
981    #[inline(always)]
982    pub fn sense7(&self) -> SENSE7_R {
983        SENSE7_R::new(((self.bits >> 28) & 7) as u8)
984    }
985    #[doc = "Bit 31 - Filter Enable 7"]
986    #[inline(always)]
987    pub fn filten7(&self) -> FILTEN7_R {
988        FILTEN7_R::new(((self.bits >> 31) & 1) != 0)
989    }
990}
991impl W {
992    #[doc = "Bits 0:2 - Input Sense Configuration 0"]
993    #[inline(always)]
994    #[must_use]
995    pub fn sense0(&mut self) -> SENSE0_W<0> {
996        SENSE0_W::new(self)
997    }
998    #[doc = "Bit 3 - Filter Enable 0"]
999    #[inline(always)]
1000    #[must_use]
1001    pub fn filten0(&mut self) -> FILTEN0_W<3> {
1002        FILTEN0_W::new(self)
1003    }
1004    #[doc = "Bits 4:6 - Input Sense Configuration 1"]
1005    #[inline(always)]
1006    #[must_use]
1007    pub fn sense1(&mut self) -> SENSE1_W<4> {
1008        SENSE1_W::new(self)
1009    }
1010    #[doc = "Bit 7 - Filter Enable 1"]
1011    #[inline(always)]
1012    #[must_use]
1013    pub fn filten1(&mut self) -> FILTEN1_W<7> {
1014        FILTEN1_W::new(self)
1015    }
1016    #[doc = "Bits 8:10 - Input Sense Configuration 2"]
1017    #[inline(always)]
1018    #[must_use]
1019    pub fn sense2(&mut self) -> SENSE2_W<8> {
1020        SENSE2_W::new(self)
1021    }
1022    #[doc = "Bit 11 - Filter Enable 2"]
1023    #[inline(always)]
1024    #[must_use]
1025    pub fn filten2(&mut self) -> FILTEN2_W<11> {
1026        FILTEN2_W::new(self)
1027    }
1028    #[doc = "Bits 12:14 - Input Sense Configuration 3"]
1029    #[inline(always)]
1030    #[must_use]
1031    pub fn sense3(&mut self) -> SENSE3_W<12> {
1032        SENSE3_W::new(self)
1033    }
1034    #[doc = "Bit 15 - Filter Enable 3"]
1035    #[inline(always)]
1036    #[must_use]
1037    pub fn filten3(&mut self) -> FILTEN3_W<15> {
1038        FILTEN3_W::new(self)
1039    }
1040    #[doc = "Bits 16:18 - Input Sense Configuration 4"]
1041    #[inline(always)]
1042    #[must_use]
1043    pub fn sense4(&mut self) -> SENSE4_W<16> {
1044        SENSE4_W::new(self)
1045    }
1046    #[doc = "Bit 19 - Filter Enable 4"]
1047    #[inline(always)]
1048    #[must_use]
1049    pub fn filten4(&mut self) -> FILTEN4_W<19> {
1050        FILTEN4_W::new(self)
1051    }
1052    #[doc = "Bits 20:22 - Input Sense Configuration 5"]
1053    #[inline(always)]
1054    #[must_use]
1055    pub fn sense5(&mut self) -> SENSE5_W<20> {
1056        SENSE5_W::new(self)
1057    }
1058    #[doc = "Bit 23 - Filter Enable 5"]
1059    #[inline(always)]
1060    #[must_use]
1061    pub fn filten5(&mut self) -> FILTEN5_W<23> {
1062        FILTEN5_W::new(self)
1063    }
1064    #[doc = "Bits 24:26 - Input Sense Configuration 6"]
1065    #[inline(always)]
1066    #[must_use]
1067    pub fn sense6(&mut self) -> SENSE6_W<24> {
1068        SENSE6_W::new(self)
1069    }
1070    #[doc = "Bit 27 - Filter Enable 6"]
1071    #[inline(always)]
1072    #[must_use]
1073    pub fn filten6(&mut self) -> FILTEN6_W<27> {
1074        FILTEN6_W::new(self)
1075    }
1076    #[doc = "Bits 28:30 - Input Sense Configuration 7"]
1077    #[inline(always)]
1078    #[must_use]
1079    pub fn sense7(&mut self) -> SENSE7_W<28> {
1080        SENSE7_W::new(self)
1081    }
1082    #[doc = "Bit 31 - Filter Enable 7"]
1083    #[inline(always)]
1084    #[must_use]
1085    pub fn filten7(&mut self) -> FILTEN7_W<31> {
1086        FILTEN7_W::new(self)
1087    }
1088    #[doc = "Writes raw bits to the register."]
1089    #[inline(always)]
1090    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
1091        self.0.bits(bits);
1092        self
1093    }
1094}
1095#[doc = "Configuration n\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [config](index.html) module"]
1096pub struct CONFIG_SPEC;
1097impl crate::RegisterSpec for CONFIG_SPEC {
1098    type Ux = u32;
1099}
1100#[doc = "`read()` method returns [config::R](R) reader structure"]
1101impl crate::Readable for CONFIG_SPEC {
1102    type Reader = R;
1103}
1104#[doc = "`write(|w| ..)` method takes [config::W](W) writer structure"]
1105impl crate::Writable for CONFIG_SPEC {
1106    type Writer = W;
1107    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
1108    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
1109}
1110#[doc = "`reset()` method sets CONFIG%s to value 0"]
1111impl crate::Resettable for CONFIG_SPEC {
1112    const RESET_VALUE: Self::Ux = 0;
1113}
atsaml21j16b/eic/config.rs

atsaml21j16b/eic/
config.rs
