#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - Control A"]
pub ctrla: CTRLA,
#[doc = "0x02 - Event Control"]
pub evctrl: EVCTRL,
#[doc = "0x03 - Debug Control"]
pub dbgctrl: DBGCTRL,
#[doc = "0x04 - Input Control"]
pub inputctrl: INPUTCTRL,
#[doc = "0x06 - Control B"]
pub ctrlb: CTRLB,
#[doc = "0x08 - Reference Control"]
pub refctrl: REFCTRL,
_reserved6: [u8; 0x01],
#[doc = "0x0a - Average Control"]
pub avgctrl: AVGCTRL,
#[doc = "0x0b - Sample Time Control"]
pub sampctrl: SAMPCTRL,
#[doc = "0x0c - Window Monitor Lower Threshold"]
pub winlt: WINLT,
#[doc = "0x0e - Window Monitor Upper Threshold"]
pub winut: WINUT,
#[doc = "0x10 - Gain Correction"]
pub gaincorr: GAINCORR,
#[doc = "0x12 - Offset Correction"]
pub offsetcorr: OFFSETCORR,
#[doc = "0x14 - Software Trigger"]
pub swtrig: SWTRIG,
_reserved13: [u8; 0x17],
#[doc = "0x2c - Interrupt Enable Clear"]
pub intenclr: INTENCLR,
#[doc = "0x2d - Interrupt Enable Set"]
pub intenset: INTENSET,
#[doc = "0x2e - Interrupt Flag Status and Clear"]
pub intflag: INTFLAG,
#[doc = "0x2f - Status"]
pub status: STATUS,
#[doc = "0x30 - Synchronization Busy"]
pub syncbusy: SYNCBUSY,
#[doc = "0x34 - DMA Sequencial Data"]
pub dseqdata: DSEQDATA,
#[doc = "0x38 - DMA Sequential Control"]
pub dseqctrl: DSEQCTRL,
#[doc = "0x3c - DMA Sequencial Status"]
pub dseqstat: DSEQSTAT,
#[doc = "0x40 - Result Conversion Value"]
pub result: RESULT,
_reserved22: [u8; 0x02],
#[doc = "0x44 - Last Sample Result"]
pub ress: RESS,
_reserved23: [u8; 0x02],
#[doc = "0x48 - Calibration"]
pub calib: CALIB,
}
#[doc = "CTRLA (rw) register accessor: Control A\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrla::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
pub type CTRLA = crate::Reg<ctrla::CTRLA_SPEC>;
#[doc = "Control A"]
pub mod ctrla;
#[doc = "EVCTRL (rw) register accessor: Event Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`evctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`evctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@evctrl`]
module"]
pub type EVCTRL = crate::Reg<evctrl::EVCTRL_SPEC>;
#[doc = "Event Control"]
pub mod evctrl;
#[doc = "DBGCTRL (rw) register accessor: Debug Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dbgctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dbgctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dbgctrl`]
module"]
pub type DBGCTRL = crate::Reg<dbgctrl::DBGCTRL_SPEC>;
#[doc = "Debug Control"]
pub mod dbgctrl;
#[doc = "INPUTCTRL (rw) register accessor: Input Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`inputctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`inputctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@inputctrl`]
module"]
pub type INPUTCTRL = crate::Reg<inputctrl::INPUTCTRL_SPEC>;
#[doc = "Input Control"]
pub mod inputctrl;
#[doc = "CTRLB (rw) register accessor: Control B\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrlb::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrlb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlb`]
module"]
pub type CTRLB = crate::Reg<ctrlb::CTRLB_SPEC>;
#[doc = "Control B"]
pub mod ctrlb;
#[doc = "REFCTRL (rw) register accessor: Reference Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`refctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`refctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@refctrl`]
module"]
pub type REFCTRL = crate::Reg<refctrl::REFCTRL_SPEC>;
#[doc = "Reference Control"]
pub mod refctrl;
#[doc = "AVGCTRL (rw) register accessor: Average Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`avgctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`avgctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@avgctrl`]
module"]
pub type AVGCTRL = crate::Reg<avgctrl::AVGCTRL_SPEC>;
#[doc = "Average Control"]
pub mod avgctrl;
#[doc = "SAMPCTRL (rw) register accessor: Sample Time Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`sampctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sampctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sampctrl`]
module"]
pub type SAMPCTRL = crate::Reg<sampctrl::SAMPCTRL_SPEC>;
#[doc = "Sample Time Control"]
pub mod sampctrl;
#[doc = "WINLT (rw) register accessor: Window Monitor Lower Threshold\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`winlt::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`winlt::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@winlt`]
module"]
pub type WINLT = crate::Reg<winlt::WINLT_SPEC>;
#[doc = "Window Monitor Lower Threshold"]
pub mod winlt;
#[doc = "WINUT (rw) register accessor: Window Monitor Upper Threshold\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`winut::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`winut::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@winut`]
module"]
pub type WINUT = crate::Reg<winut::WINUT_SPEC>;
#[doc = "Window Monitor Upper Threshold"]
pub mod winut;
#[doc = "GAINCORR (rw) register accessor: Gain Correction\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gaincorr::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gaincorr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gaincorr`]
module"]
pub type GAINCORR = crate::Reg<gaincorr::GAINCORR_SPEC>;
#[doc = "Gain Correction"]
pub mod gaincorr;
#[doc = "OFFSETCORR (rw) register accessor: Offset Correction\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`offsetcorr::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`offsetcorr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@offsetcorr`]
module"]
pub type OFFSETCORR = crate::Reg<offsetcorr::OFFSETCORR_SPEC>;
#[doc = "Offset Correction"]
pub mod offsetcorr;
#[doc = "SWTRIG (rw) register accessor: Software Trigger\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`swtrig::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`swtrig::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@swtrig`]
module"]
pub type SWTRIG = crate::Reg<swtrig::SWTRIG_SPEC>;
#[doc = "Software Trigger"]
pub mod swtrig;
#[doc = "INTENCLR (rw) register accessor: Interrupt Enable Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
pub type INTENCLR = crate::Reg<intenclr::INTENCLR_SPEC>;
#[doc = "Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: Interrupt Enable Set\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
pub type INTENSET = crate::Reg<intenset::INTENSET_SPEC>;
#[doc = "Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: Interrupt Flag Status and Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
pub type INTFLAG = crate::Reg<intflag::INTFLAG_SPEC>;
#[doc = "Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "STATUS (r) register accessor: Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = "Status"]
pub mod status;
#[doc = "SYNCBUSY (r) register accessor: Synchronization Busy\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`syncbusy::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@syncbusy`]
module"]
pub type SYNCBUSY = crate::Reg<syncbusy::SYNCBUSY_SPEC>;
#[doc = "Synchronization Busy"]
pub mod syncbusy;
#[doc = "DSEQDATA (w) register accessor: DMA Sequencial Data\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dseqdata::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dseqdata`]
module"]
pub type DSEQDATA = crate::Reg<dseqdata::DSEQDATA_SPEC>;
#[doc = "DMA Sequencial Data"]
pub mod dseqdata;
#[doc = "DSEQCTRL (rw) register accessor: DMA Sequential Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dseqctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dseqctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dseqctrl`]
module"]
pub type DSEQCTRL = crate::Reg<dseqctrl::DSEQCTRL_SPEC>;
#[doc = "DMA Sequential Control"]
pub mod dseqctrl;
#[doc = "DSEQSTAT (r) register accessor: DMA Sequencial Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dseqstat::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dseqstat`]
module"]
pub type DSEQSTAT = crate::Reg<dseqstat::DSEQSTAT_SPEC>;
#[doc = "DMA Sequencial Status"]
pub mod dseqstat;
#[doc = "RESULT (r) register accessor: Result Conversion Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`result::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@result`]
module"]
pub type RESULT = crate::Reg<result::RESULT_SPEC>;
#[doc = "Result Conversion Value"]
pub mod result;
#[doc = "RESS (r) register accessor: Last Sample Result\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ress::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ress`]
module"]
pub type RESS = crate::Reg<ress::RESS_SPEC>;
#[doc = "Last Sample Result"]
pub mod ress;
#[doc = "CALIB (rw) register accessor: Calibration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`calib::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`calib::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@calib`]
module"]
pub type CALIB = crate::Reg<calib::CALIB_SPEC>;
#[doc = "Calibration"]
pub mod calib;