#[repr(C)]
#[doc = "Register block"]
pub struct RegisterBlock {
ctrla: Ctrla,
config: Config,
ewctrl: Ewctrl,
_reserved3: [u8; 0x01],
intenclr: Intenclr,
intenset: Intenset,
intflag: Intflag,
_reserved6: [u8; 0x01],
syncbusy: Syncbusy,
clear: Clear,
}
impl RegisterBlock {
#[doc = "0x00 - Control"]
#[inline(always)]
pub const fn ctrla(&self) -> &Ctrla {
&self.ctrla
}
#[doc = "0x01 - Configuration"]
#[inline(always)]
pub const fn config(&self) -> &Config {
&self.config
}
#[doc = "0x02 - Early Warning Interrupt Control"]
#[inline(always)]
pub const fn ewctrl(&self) -> &Ewctrl {
&self.ewctrl
}
#[doc = "0x04 - Interrupt Enable Clear"]
#[inline(always)]
pub const fn intenclr(&self) -> &Intenclr {
&self.intenclr
}
#[doc = "0x05 - Interrupt Enable Set"]
#[inline(always)]
pub const fn intenset(&self) -> &Intenset {
&self.intenset
}
#[doc = "0x06 - Interrupt Flag Status and Clear"]
#[inline(always)]
pub const fn intflag(&self) -> &Intflag {
&self.intflag
}
#[doc = "0x08 - Synchronization Busy"]
#[inline(always)]
pub const fn syncbusy(&self) -> &Syncbusy {
&self.syncbusy
}
#[doc = "0x0c - Clear"]
#[inline(always)]
pub const fn clear(&self) -> &Clear {
&self.clear
}
}
#[doc = "CTRLA (rw) register accessor: Control\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrla::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
#[doc(alias = "CTRLA")]
pub type Ctrla = crate::Reg<ctrla::CtrlaSpec>;
#[doc = "Control"]
pub mod ctrla;
#[doc = "CONFIG (rw) register accessor: Configuration\n\nYou can [`read`](crate::Reg::read) this register and get [`config::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`config::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@config`]
module"]
#[doc(alias = "CONFIG")]
pub type Config = crate::Reg<config::ConfigSpec>;
#[doc = "Configuration"]
pub mod config;
#[doc = "EWCTRL (rw) register accessor: Early Warning Interrupt Control\n\nYou can [`read`](crate::Reg::read) this register and get [`ewctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ewctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ewctrl`]
module"]
#[doc(alias = "EWCTRL")]
pub type Ewctrl = crate::Reg<ewctrl::EwctrlSpec>;
#[doc = "Early Warning Interrupt Control"]
pub mod ewctrl;
#[doc = "INTENCLR (rw) register accessor: Interrupt Enable Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
#[doc(alias = "INTENCLR")]
pub type Intenclr = crate::Reg<intenclr::IntenclrSpec>;
#[doc = "Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: Interrupt Enable Set\n\nYou can [`read`](crate::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
#[doc(alias = "INTENSET")]
pub type Intenset = crate::Reg<intenset::IntensetSpec>;
#[doc = "Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: Interrupt Flag Status and Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
#[doc(alias = "INTFLAG")]
pub type Intflag = crate::Reg<intflag::IntflagSpec>;
#[doc = "Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "SYNCBUSY (r) register accessor: Synchronization Busy\n\nYou can [`read`](crate::Reg::read) this register and get [`syncbusy::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@syncbusy`]
module"]
#[doc(alias = "SYNCBUSY")]
pub type Syncbusy = crate::Reg<syncbusy::SyncbusySpec>;
#[doc = "Synchronization Busy"]
pub mod syncbusy;
#[doc = "CLEAR (w) register accessor: Clear\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`clear::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@clear`]
module"]
#[doc(alias = "CLEAR")]
pub type Clear = crate::Reg<clear::ClearSpec>;
#[doc = "Clear"]
pub mod clear;