#[repr(C)]
#[doc = "USB is Host"]
#[doc(alias = "HOST")]
pub struct Host {
ctrla: Ctrla,
_reserved1: [u8; 0x01],
syncbusy: Syncbusy,
qosctrl: Qosctrl,
_reserved3: [u8; 0x04],
ctrlb: Ctrlb,
hsofc: Hsofc,
_reserved5: [u8; 0x01],
status: Status,
fsmstatus: Fsmstatus,
_reserved7: [u8; 0x02],
fnum: Fnum,
flenhigh: Flenhigh,
_reserved9: [u8; 0x01],
intenclr: Intenclr,
_reserved10: [u8; 0x02],
intenset: Intenset,
_reserved11: [u8; 0x02],
intflag: Intflag,
_reserved12: [u8; 0x02],
pintsmry: Pintsmry,
_reserved13: [u8; 0x02],
descadd: Descadd,
padcal: Padcal,
_reserved15: [u8; 0xd6],
host_pipe: (),
}
impl Host {
#[doc = "0x00 - Control A"]
#[inline(always)]
pub const fn ctrla(&self) -> &Ctrla {
&self.ctrla
}
#[doc = "0x02 - Synchronization Busy"]
#[inline(always)]
pub const fn syncbusy(&self) -> &Syncbusy {
&self.syncbusy
}
#[doc = "0x03 - USB Quality Of Service"]
#[inline(always)]
pub const fn qosctrl(&self) -> &Qosctrl {
&self.qosctrl
}
#[doc = "0x08 - HOST Control B"]
#[inline(always)]
pub const fn ctrlb(&self) -> &Ctrlb {
&self.ctrlb
}
#[doc = "0x0a - HOST Host Start Of Frame Control"]
#[inline(always)]
pub const fn hsofc(&self) -> &Hsofc {
&self.hsofc
}
#[doc = "0x0c - HOST Status"]
#[inline(always)]
pub const fn status(&self) -> &Status {
&self.status
}
#[doc = "0x0d - Finite State Machine Status"]
#[inline(always)]
pub const fn fsmstatus(&self) -> &Fsmstatus {
&self.fsmstatus
}
#[doc = "0x10 - HOST Host Frame Number"]
#[inline(always)]
pub const fn fnum(&self) -> &Fnum {
&self.fnum
}
#[doc = "0x12 - HOST Host Frame Length"]
#[inline(always)]
pub const fn flenhigh(&self) -> &Flenhigh {
&self.flenhigh
}
#[doc = "0x14 - HOST Host Interrupt Enable Clear"]
#[inline(always)]
pub const fn intenclr(&self) -> &Intenclr {
&self.intenclr
}
#[doc = "0x18 - HOST Host Interrupt Enable Set"]
#[inline(always)]
pub const fn intenset(&self) -> &Intenset {
&self.intenset
}
#[doc = "0x1c - HOST Host Interrupt Flag"]
#[inline(always)]
pub const fn intflag(&self) -> &Intflag {
&self.intflag
}
#[doc = "0x20 - HOST Pipe Interrupt Summary"]
#[inline(always)]
pub const fn pintsmry(&self) -> &Pintsmry {
&self.pintsmry
}
#[doc = "0x24 - Descriptor Address"]
#[inline(always)]
pub const fn descadd(&self) -> &Descadd {
&self.descadd
}
#[doc = "0x28 - USB PAD Calibration"]
#[inline(always)]
pub const fn padcal(&self) -> &Padcal {
&self.padcal
}
#[doc = "0x100..0x150 - HOST_PIPE\\[%s\\]"]
#[inline(always)]
pub const fn host_pipe(&self, n: usize) -> &HostPipe {
#[allow(clippy::no_effect)]
[(); 8][n];
unsafe {
&*(self as *const Self)
.cast::<u8>()
.add(256)
.add(32 * n)
.cast()
}
}
#[doc = "Iterator for array of:"]
#[doc = "0x100..0x150 - HOST_PIPE\\[%s\\]"]
#[inline(always)]
pub fn host_pipe_iter(&self) -> impl Iterator<Item = &HostPipe> {
(0..8).map(move |n| unsafe {
&*(self as *const Self)
.cast::<u8>()
.add(256)
.add(32 * n)
.cast()
})
}
}
#[doc = "CTRLA (rw) register accessor: Control A\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrla::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
#[doc(alias = "CTRLA")]
pub type Ctrla = crate::Reg<ctrla::CtrlaSpec>;
#[doc = "Control A"]
pub mod ctrla;
#[doc = "SYNCBUSY (r) register accessor: Synchronization Busy\n\nYou can [`read`](crate::Reg::read) this register and get [`syncbusy::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@syncbusy`]
module"]
#[doc(alias = "SYNCBUSY")]
pub type Syncbusy = crate::Reg<syncbusy::SyncbusySpec>;
#[doc = "Synchronization Busy"]
pub mod syncbusy;
#[doc = "QOSCTRL (rw) register accessor: USB Quality Of Service\n\nYou can [`read`](crate::Reg::read) this register and get [`qosctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`qosctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@qosctrl`]
module"]
#[doc(alias = "QOSCTRL")]
pub type Qosctrl = crate::Reg<qosctrl::QosctrlSpec>;
#[doc = "USB Quality Of Service"]
pub mod qosctrl;
#[doc = "CTRLB (rw) register accessor: HOST Control B\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrlb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrlb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlb`]
module"]
#[doc(alias = "CTRLB")]
pub type Ctrlb = crate::Reg<ctrlb::CtrlbSpec>;
#[doc = "HOST Control B"]
pub mod ctrlb;
#[doc = "HSOFC (rw) register accessor: HOST Host Start Of Frame Control\n\nYou can [`read`](crate::Reg::read) this register and get [`hsofc::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`hsofc::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@hsofc`]
module"]
#[doc(alias = "HSOFC")]
pub type Hsofc = crate::Reg<hsofc::HsofcSpec>;
#[doc = "HOST Host Start Of Frame Control"]
pub mod hsofc;
#[doc = "STATUS (rw) register accessor: HOST Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
#[doc(alias = "STATUS")]
pub type Status = crate::Reg<status::StatusSpec>;
#[doc = "HOST Status"]
pub mod status;
#[doc = "FSMSTATUS (r) register accessor: Finite State Machine Status\n\nYou can [`read`](crate::Reg::read) this register and get [`fsmstatus::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fsmstatus`]
module"]
#[doc(alias = "FSMSTATUS")]
pub type Fsmstatus = crate::Reg<fsmstatus::FsmstatusSpec>;
#[doc = "Finite State Machine Status"]
pub mod fsmstatus;
#[doc = "FNUM (rw) register accessor: HOST Host Frame Number\n\nYou can [`read`](crate::Reg::read) this register and get [`fnum::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`fnum::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fnum`]
module"]
#[doc(alias = "FNUM")]
pub type Fnum = crate::Reg<fnum::FnumSpec>;
#[doc = "HOST Host Frame Number"]
pub mod fnum;
#[doc = "FLENHIGH (r) register accessor: HOST Host Frame Length\n\nYou can [`read`](crate::Reg::read) this register and get [`flenhigh::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@flenhigh`]
module"]
#[doc(alias = "FLENHIGH")]
pub type Flenhigh = crate::Reg<flenhigh::FlenhighSpec>;
#[doc = "HOST Host Frame Length"]
pub mod flenhigh;
#[doc = "INTENCLR (rw) register accessor: HOST Host Interrupt Enable Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
#[doc(alias = "INTENCLR")]
pub type Intenclr = crate::Reg<intenclr::IntenclrSpec>;
#[doc = "HOST Host Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: HOST Host Interrupt Enable Set\n\nYou can [`read`](crate::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
#[doc(alias = "INTENSET")]
pub type Intenset = crate::Reg<intenset::IntensetSpec>;
#[doc = "HOST Host Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: HOST Host Interrupt Flag\n\nYou can [`read`](crate::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
#[doc(alias = "INTFLAG")]
pub type Intflag = crate::Reg<intflag::IntflagSpec>;
#[doc = "HOST Host Interrupt Flag"]
pub mod intflag;
#[doc = "PINTSMRY (r) register accessor: HOST Pipe Interrupt Summary\n\nYou can [`read`](crate::Reg::read) this register and get [`pintsmry::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pintsmry`]
module"]
#[doc(alias = "PINTSMRY")]
pub type Pintsmry = crate::Reg<pintsmry::PintsmrySpec>;
#[doc = "HOST Pipe Interrupt Summary"]
pub mod pintsmry;
#[doc = "DESCADD (rw) register accessor: Descriptor Address\n\nYou can [`read`](crate::Reg::read) this register and get [`descadd::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`descadd::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@descadd`]
module"]
#[doc(alias = "DESCADD")]
pub type Descadd = crate::Reg<descadd::DescaddSpec>;
#[doc = "Descriptor Address"]
pub mod descadd;
#[doc = "PADCAL (rw) register accessor: USB PAD Calibration\n\nYou can [`read`](crate::Reg::read) this register and get [`padcal::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`padcal::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@padcal`]
module"]
#[doc(alias = "PADCAL")]
pub type Padcal = crate::Reg<padcal::PadcalSpec>;
#[doc = "USB PAD Calibration"]
pub mod padcal;
#[doc = "HOST_PIPE\\[%s\\]"]
pub use self::host_pipe::HostPipe;
#[doc = r"Cluster"]
#[doc = "HOST_PIPE\\[%s\\]"]
pub mod host_pipe;