#[doc = "Register `VREF` reader"]
pub type R = crate::R<VrefSpec>;
#[doc = "Register `VREF` writer"]
pub type W = crate::W<VrefSpec>;
#[doc = "Field `TSEN` reader - Temperature Sensor Output Enable"]
pub type TsenR = crate::BitReader;
#[doc = "Field `TSEN` writer - Temperature Sensor Output Enable"]
pub type TsenW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `VREFOE` reader - Voltage Reference Output Enable"]
pub type VrefoeR = crate::BitReader;
#[doc = "Field `VREFOE` writer - Voltage Reference Output Enable"]
pub type VrefoeW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TSSEL` reader - Temperature Sensor Selection"]
pub type TsselR = crate::BitReader;
#[doc = "Field `TSSEL` writer - Temperature Sensor Selection"]
pub type TsselW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RUNSTDBY` reader - Run during Standby"]
pub type RunstdbyR = crate::BitReader;
#[doc = "Field `RUNSTDBY` writer - Run during Standby"]
pub type RunstdbyW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `ONDEMAND` reader - On Demand Contrl"]
pub type OndemandR = crate::BitReader;
#[doc = "Field `ONDEMAND` writer - On Demand Contrl"]
pub type OndemandW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Voltage Reference Selection\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum Selselect {
#[doc = "0: 1.0V voltage reference typical value"]
_1v0 = 0,
#[doc = "1: 1.1V voltage reference typical value"]
_1v1 = 1,
#[doc = "2: 1.2V voltage reference typical value"]
_1v2 = 2,
#[doc = "3: 1.25V voltage reference typical value"]
_1v25 = 3,
#[doc = "4: 2.0V voltage reference typical value"]
_2v0 = 4,
#[doc = "5: 2.2V voltage reference typical value"]
_2v2 = 5,
#[doc = "6: 2.4V voltage reference typical value"]
_2v4 = 6,
#[doc = "7: 2.5V voltage reference typical value"]
_2v5 = 7,
}
impl From<Selselect> for u8 {
#[inline(always)]
fn from(variant: Selselect) -> Self {
variant as _
}
}
impl crate::FieldSpec for Selselect {
type Ux = u8;
}
impl crate::IsEnum for Selselect {}
#[doc = "Field `SEL` reader - Voltage Reference Selection"]
pub type SelR = crate::FieldReader<Selselect>;
impl SelR {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub const fn variant(&self) -> Option<Selselect> {
match self.bits {
0 => Some(Selselect::_1v0),
1 => Some(Selselect::_1v1),
2 => Some(Selselect::_1v2),
3 => Some(Selselect::_1v25),
4 => Some(Selselect::_2v0),
5 => Some(Selselect::_2v2),
6 => Some(Selselect::_2v4),
7 => Some(Selselect::_2v5),
_ => None,
}
}
#[doc = "1.0V voltage reference typical value"]
#[inline(always)]
pub fn is_1v0(&self) -> bool {
*self == Selselect::_1v0
}
#[doc = "1.1V voltage reference typical value"]
#[inline(always)]
pub fn is_1v1(&self) -> bool {
*self == Selselect::_1v1
}
#[doc = "1.2V voltage reference typical value"]
#[inline(always)]
pub fn is_1v2(&self) -> bool {
*self == Selselect::_1v2
}
#[doc = "1.25V voltage reference typical value"]
#[inline(always)]
pub fn is_1v25(&self) -> bool {
*self == Selselect::_1v25
}
#[doc = "2.0V voltage reference typical value"]
#[inline(always)]
pub fn is_2v0(&self) -> bool {
*self == Selselect::_2v0
}
#[doc = "2.2V voltage reference typical value"]
#[inline(always)]
pub fn is_2v2(&self) -> bool {
*self == Selselect::_2v2
}
#[doc = "2.4V voltage reference typical value"]
#[inline(always)]
pub fn is_2v4(&self) -> bool {
*self == Selselect::_2v4
}
#[doc = "2.5V voltage reference typical value"]
#[inline(always)]
pub fn is_2v5(&self) -> bool {
*self == Selselect::_2v5
}
}
#[doc = "Field `SEL` writer - Voltage Reference Selection"]
pub type SelW<'a, REG> = crate::FieldWriter<'a, REG, 4, Selselect>;
impl<'a, REG> SelW<'a, REG>
where
REG: crate::Writable + crate::RegisterSpec,
REG::Ux: From<u8>,
{
#[doc = "1.0V voltage reference typical value"]
#[inline(always)]
pub fn _1v0(self) -> &'a mut crate::W<REG> {
self.variant(Selselect::_1v0)
}
#[doc = "1.1V voltage reference typical value"]
#[inline(always)]
pub fn _1v1(self) -> &'a mut crate::W<REG> {
self.variant(Selselect::_1v1)
}
#[doc = "1.2V voltage reference typical value"]
#[inline(always)]
pub fn _1v2(self) -> &'a mut crate::W<REG> {
self.variant(Selselect::_1v2)
}
#[doc = "1.25V voltage reference typical value"]
#[inline(always)]
pub fn _1v25(self) -> &'a mut crate::W<REG> {
self.variant(Selselect::_1v25)
}
#[doc = "2.0V voltage reference typical value"]
#[inline(always)]
pub fn _2v0(self) -> &'a mut crate::W<REG> {
self.variant(Selselect::_2v0)
}
#[doc = "2.2V voltage reference typical value"]
#[inline(always)]
pub fn _2v2(self) -> &'a mut crate::W<REG> {
self.variant(Selselect::_2v2)
}
#[doc = "2.4V voltage reference typical value"]
#[inline(always)]
pub fn _2v4(self) -> &'a mut crate::W<REG> {
self.variant(Selselect::_2v4)
}
#[doc = "2.5V voltage reference typical value"]
#[inline(always)]
pub fn _2v5(self) -> &'a mut crate::W<REG> {
self.variant(Selselect::_2v5)
}
}
impl R {
#[doc = "Bit 1 - Temperature Sensor Output Enable"]
#[inline(always)]
pub fn tsen(&self) -> TsenR {
TsenR::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - Voltage Reference Output Enable"]
#[inline(always)]
pub fn vrefoe(&self) -> VrefoeR {
VrefoeR::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - Temperature Sensor Selection"]
#[inline(always)]
pub fn tssel(&self) -> TsselR {
TsselR::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 6 - Run during Standby"]
#[inline(always)]
pub fn runstdby(&self) -> RunstdbyR {
RunstdbyR::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - On Demand Contrl"]
#[inline(always)]
pub fn ondemand(&self) -> OndemandR {
OndemandR::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bits 16:19 - Voltage Reference Selection"]
#[inline(always)]
pub fn sel(&self) -> SelR {
SelR::new(((self.bits >> 16) & 0x0f) as u8)
}
}
impl W {
#[doc = "Bit 1 - Temperature Sensor Output Enable"]
#[inline(always)]
#[must_use]
pub fn tsen(&mut self) -> TsenW<VrefSpec> {
TsenW::new(self, 1)
}
#[doc = "Bit 2 - Voltage Reference Output Enable"]
#[inline(always)]
#[must_use]
pub fn vrefoe(&mut self) -> VrefoeW<VrefSpec> {
VrefoeW::new(self, 2)
}
#[doc = "Bit 3 - Temperature Sensor Selection"]
#[inline(always)]
#[must_use]
pub fn tssel(&mut self) -> TsselW<VrefSpec> {
TsselW::new(self, 3)
}
#[doc = "Bit 6 - Run during Standby"]
#[inline(always)]
#[must_use]
pub fn runstdby(&mut self) -> RunstdbyW<VrefSpec> {
RunstdbyW::new(self, 6)
}
#[doc = "Bit 7 - On Demand Contrl"]
#[inline(always)]
#[must_use]
pub fn ondemand(&mut self) -> OndemandW<VrefSpec> {
OndemandW::new(self, 7)
}
#[doc = "Bits 16:19 - Voltage Reference Selection"]
#[inline(always)]
#[must_use]
pub fn sel(&mut self) -> SelW<VrefSpec> {
SelW::new(self, 16)
}
}
#[doc = "VREF Control\n\nYou can [`read`](crate::Reg::read) this register and get [`vref::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`vref::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct VrefSpec;
impl crate::RegisterSpec for VrefSpec {
type Ux = u32;
}
#[doc = "`read()` method returns [`vref::R`](R) reader structure"]
impl crate::Readable for VrefSpec {}
#[doc = "`write(|w| ..)` method takes [`vref::W`](W) writer structure"]
impl crate::Writable for VrefSpec {
type Safety = crate::Unsafe;
const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets VREF to value 0"]
impl crate::Resettable for VrefSpec {
const RESET_VALUE: u32 = 0;
}