#[repr(C)]
#[doc = "SPI Master Mode"]
#[doc(alias = "SPIM")]
pub struct Spim {
ctrla: Ctrla,
ctrlb: Ctrlb,
ctrlc: Ctrlc,
baud: Baud,
_reserved4: [u8; 0x07],
intenclr: Intenclr,
_reserved5: [u8; 0x01],
intenset: Intenset,
_reserved6: [u8; 0x01],
intflag: Intflag,
_reserved7: [u8; 0x01],
status: Status,
syncbusy: Syncbusy,
_reserved9: [u8; 0x02],
length: Length,
addr: Addr,
data: Data,
_reserved12: [u8; 0x04],
dbgctrl: Dbgctrl,
}
impl Spim {
#[doc = "0x00 - SPIM Control A"]
#[inline(always)]
pub const fn ctrla(&self) -> &Ctrla {
&self.ctrla
}
#[doc = "0x04 - SPIM Control B"]
#[inline(always)]
pub const fn ctrlb(&self) -> &Ctrlb {
&self.ctrlb
}
#[doc = "0x08 - SPIM Control C"]
#[inline(always)]
pub const fn ctrlc(&self) -> &Ctrlc {
&self.ctrlc
}
#[doc = "0x0c - SPIM Baud Rate"]
#[inline(always)]
pub const fn baud(&self) -> &Baud {
&self.baud
}
#[doc = "0x14 - SPIM Interrupt Enable Clear"]
#[inline(always)]
pub const fn intenclr(&self) -> &Intenclr {
&self.intenclr
}
#[doc = "0x16 - SPIM Interrupt Enable Set"]
#[inline(always)]
pub const fn intenset(&self) -> &Intenset {
&self.intenset
}
#[doc = "0x18 - SPIM Interrupt Flag Status and Clear"]
#[inline(always)]
pub const fn intflag(&self) -> &Intflag {
&self.intflag
}
#[doc = "0x1a - SPIM Status"]
#[inline(always)]
pub const fn status(&self) -> &Status {
&self.status
}
#[doc = "0x1c - SPIM Synchronization Busy"]
#[inline(always)]
pub const fn syncbusy(&self) -> &Syncbusy {
&self.syncbusy
}
#[doc = "0x22 - SPIM Length"]
#[inline(always)]
pub const fn length(&self) -> &Length {
&self.length
}
#[doc = "0x24 - SPIM Address"]
#[inline(always)]
pub const fn addr(&self) -> &Addr {
&self.addr
}
#[doc = "0x28 - SPIM Data"]
#[inline(always)]
pub const fn data(&self) -> &Data {
&self.data
}
#[doc = "0x30 - SPIM Debug Control"]
#[inline(always)]
pub const fn dbgctrl(&self) -> &Dbgctrl {
&self.dbgctrl
}
}
#[doc = "CTRLA (rw) register accessor: SPIM Control A\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrla::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
#[doc(alias = "CTRLA")]
pub type Ctrla = crate::Reg<ctrla::CtrlaSpec>;
#[doc = "SPIM Control A"]
pub mod ctrla;
#[doc = "CTRLB (rw) register accessor: SPIM Control B\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrlb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrlb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlb`]
module"]
#[doc(alias = "CTRLB")]
pub type Ctrlb = crate::Reg<ctrlb::CtrlbSpec>;
#[doc = "SPIM Control B"]
pub mod ctrlb;
#[doc = "CTRLC (rw) register accessor: SPIM Control C\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrlc::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrlc::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlc`]
module"]
#[doc(alias = "CTRLC")]
pub type Ctrlc = crate::Reg<ctrlc::CtrlcSpec>;
#[doc = "SPIM Control C"]
pub mod ctrlc;
#[doc = "BAUD (rw) register accessor: SPIM Baud Rate\n\nYou can [`read`](crate::Reg::read) this register and get [`baud::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`baud::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@baud`]
module"]
#[doc(alias = "BAUD")]
pub type Baud = crate::Reg<baud::BaudSpec>;
#[doc = "SPIM Baud Rate"]
pub mod baud;
#[doc = "INTENCLR (rw) register accessor: SPIM Interrupt Enable Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
#[doc(alias = "INTENCLR")]
pub type Intenclr = crate::Reg<intenclr::IntenclrSpec>;
#[doc = "SPIM Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: SPIM Interrupt Enable Set\n\nYou can [`read`](crate::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
#[doc(alias = "INTENSET")]
pub type Intenset = crate::Reg<intenset::IntensetSpec>;
#[doc = "SPIM Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: SPIM Interrupt Flag Status and Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
#[doc(alias = "INTFLAG")]
pub type Intflag = crate::Reg<intflag::IntflagSpec>;
#[doc = "SPIM Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "STATUS (rw) register accessor: SPIM Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
#[doc(alias = "STATUS")]
pub type Status = crate::Reg<status::StatusSpec>;
#[doc = "SPIM Status"]
pub mod status;
#[doc = "SYNCBUSY (r) register accessor: SPIM Synchronization Busy\n\nYou can [`read`](crate::Reg::read) this register and get [`syncbusy::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@syncbusy`]
module"]
#[doc(alias = "SYNCBUSY")]
pub type Syncbusy = crate::Reg<syncbusy::SyncbusySpec>;
#[doc = "SPIM Synchronization Busy"]
pub mod syncbusy;
#[doc = "LENGTH (rw) register accessor: SPIM Length\n\nYou can [`read`](crate::Reg::read) this register and get [`length::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`length::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@length`]
module"]
#[doc(alias = "LENGTH")]
pub type Length = crate::Reg<length::LengthSpec>;
#[doc = "SPIM Length"]
pub mod length;
#[doc = "ADDR (rw) register accessor: SPIM Address\n\nYou can [`read`](crate::Reg::read) this register and get [`addr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`addr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@addr`]
module"]
#[doc(alias = "ADDR")]
pub type Addr = crate::Reg<addr::AddrSpec>;
#[doc = "SPIM Address"]
pub mod addr;
#[doc = "DATA (rw) register accessor: SPIM Data\n\nYou can [`read`](crate::Reg::read) this register and get [`data::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data`]
module"]
#[doc(alias = "DATA")]
pub type Data = crate::Reg<data::DataSpec>;
#[doc = "SPIM Data"]
pub mod data;
#[doc = "DBGCTRL (rw) register accessor: SPIM Debug Control\n\nYou can [`read`](crate::Reg::read) this register and get [`dbgctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dbgctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dbgctrl`]
module"]
#[doc(alias = "DBGCTRL")]
pub type Dbgctrl = crate::Reg<dbgctrl::DbgctrlSpec>;
#[doc = "SPIM Debug Control"]
pub mod dbgctrl;