1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74

#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
    #[doc = "0x00 - Control"]
    pub ctrl: CTRL,
    #[doc = "0x01 - Status"]
    pub status: STATUS,
    #[doc = "0x02 - Non-Maskable Interrupt Control"]
    pub nmictrl: NMICTRL,
    #[doc = "0x03 - Non-Maskable Interrupt Flag Status and Clear"]
    pub nmiflag: NMIFLAG,
    #[doc = "0x04 - Event Control"]
    pub evctrl: EVCTRL,
    #[doc = "0x08 - Interrupt Enable Clear"]
    pub intenclr: INTENCLR,
    #[doc = "0x0c - Interrupt Enable Set"]
    pub intenset: INTENSET,
    #[doc = "0x10 - Interrupt Flag Status and Clear"]
    pub intflag: INTFLAG,
    #[doc = "0x14 - Wake-Up Enable"]
    pub wakeup: WAKEUP,
    #[doc = "0x18..0x20 - Configuration n"]
    pub config: [CONFIG; 2],
}
#[doc = "CTRL (rw) register accessor: Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrl`]
module"]
pub type CTRL = crate::Reg<ctrl::CTRL_SPEC>;
#[doc = "Control"]
pub mod ctrl;
#[doc = "STATUS (r) register accessor: Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = "Status"]
pub mod status;
#[doc = "NMICTRL (rw) register accessor: Non-Maskable Interrupt Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`nmictrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`nmictrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@nmictrl`]
module"]
pub type NMICTRL = crate::Reg<nmictrl::NMICTRL_SPEC>;
#[doc = "Non-Maskable Interrupt Control"]
pub mod nmictrl;
#[doc = "NMIFLAG (rw) register accessor: Non-Maskable Interrupt Flag Status and Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`nmiflag::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`nmiflag::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@nmiflag`]
module"]
pub type NMIFLAG = crate::Reg<nmiflag::NMIFLAG_SPEC>;
#[doc = "Non-Maskable Interrupt Flag Status and Clear"]
pub mod nmiflag;
#[doc = "EVCTRL (rw) register accessor: Event Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`evctrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`evctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@evctrl`]
module"]
pub type EVCTRL = crate::Reg<evctrl::EVCTRL_SPEC>;
#[doc = "Event Control"]
pub mod evctrl;
#[doc = "INTENCLR (rw) register accessor: Interrupt Enable Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenclr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
pub type INTENCLR = crate::Reg<intenclr::INTENCLR_SPEC>;
#[doc = "Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: Interrupt Enable Set\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenset::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
pub type INTENSET = crate::Reg<intenset::INTENSET_SPEC>;
#[doc = "Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: Interrupt Flag Status and Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intflag::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
pub type INTFLAG = crate::Reg<intflag::INTFLAG_SPEC>;
#[doc = "Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "WAKEUP (rw) register accessor: Wake-Up Enable\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wakeup::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wakeup::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wakeup`]
module"]
pub type WAKEUP = crate::Reg<wakeup::WAKEUP_SPEC>;
#[doc = "Wake-Up Enable"]
pub mod wakeup;
#[doc = "CONFIG (rw) register accessor: Configuration n\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`config::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`config::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@config`]
module"]
pub type CONFIG = crate::Reg<config::CONFIG_SPEC>;
#[doc = "Configuration n"]
pub mod config;