#[repr(C)]
#[doc = "16-bit Counter with Two 16-bit Compares"]
#[doc(alias = "MODE1")]
pub struct Mode1 {
ctrl: Ctrl,
readreq: Readreq,
evctrl: Evctrl,
intenclr: Intenclr,
intenset: Intenset,
intflag: Intflag,
_reserved6: [u8; 0x01],
status: Status,
dbgctrl: Dbgctrl,
freqcorr: Freqcorr,
_reserved9: [u8; 0x03],
count: Count,
_reserved10: [u8; 0x02],
per: Per,
_reserved11: [u8; 0x02],
comp: [Comp; 2],
}
impl Mode1 {
#[doc = "0x00 - MODE1 Control"]
#[inline(always)]
pub const fn ctrl(&self) -> &Ctrl {
&self.ctrl
}
#[doc = "0x02 - Read Request"]
#[inline(always)]
pub const fn readreq(&self) -> &Readreq {
&self.readreq
}
#[doc = "0x04 - MODE1 Event Control"]
#[inline(always)]
pub const fn evctrl(&self) -> &Evctrl {
&self.evctrl
}
#[doc = "0x06 - MODE1 Interrupt Enable Clear"]
#[inline(always)]
pub const fn intenclr(&self) -> &Intenclr {
&self.intenclr
}
#[doc = "0x07 - MODE1 Interrupt Enable Set"]
#[inline(always)]
pub const fn intenset(&self) -> &Intenset {
&self.intenset
}
#[doc = "0x08 - MODE1 Interrupt Flag Status and Clear"]
#[inline(always)]
pub const fn intflag(&self) -> &Intflag {
&self.intflag
}
#[doc = "0x0a - Status"]
#[inline(always)]
pub const fn status(&self) -> &Status {
&self.status
}
#[doc = "0x0b - Debug Control"]
#[inline(always)]
pub const fn dbgctrl(&self) -> &Dbgctrl {
&self.dbgctrl
}
#[doc = "0x0c - Frequency Correction"]
#[inline(always)]
pub const fn freqcorr(&self) -> &Freqcorr {
&self.freqcorr
}
#[doc = "0x10 - MODE1 Counter Value"]
#[inline(always)]
pub const fn count(&self) -> &Count {
&self.count
}
#[doc = "0x14 - MODE1 Counter Period"]
#[inline(always)]
pub const fn per(&self) -> &Per {
&self.per
}
#[doc = "0x18 - MODE1 Compare n Value"]
#[inline(always)]
pub const fn comp(&self, n: usize) -> &Comp {
&self.comp[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x18 - MODE1 Compare n Value"]
#[inline(always)]
pub fn comp_iter(&self) -> impl Iterator<Item = &Comp> {
self.comp.iter()
}
}
#[doc = "CTRL (rw) register accessor: MODE1 Control\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrl`]
module"]
#[doc(alias = "CTRL")]
pub type Ctrl = crate::Reg<ctrl::CtrlSpec>;
#[doc = "MODE1 Control"]
pub mod ctrl;
#[doc = "READREQ (rw) register accessor: Read Request\n\nYou can [`read`](crate::Reg::read) this register and get [`readreq::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`readreq::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@readreq`]
module"]
#[doc(alias = "READREQ")]
pub type Readreq = crate::Reg<readreq::ReadreqSpec>;
#[doc = "Read Request"]
pub mod readreq;
#[doc = "EVCTRL (rw) register accessor: MODE1 Event Control\n\nYou can [`read`](crate::Reg::read) this register and get [`evctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`evctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@evctrl`]
module"]
#[doc(alias = "EVCTRL")]
pub type Evctrl = crate::Reg<evctrl::EvctrlSpec>;
#[doc = "MODE1 Event Control"]
pub mod evctrl;
#[doc = "INTENCLR (rw) register accessor: MODE1 Interrupt Enable Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
#[doc(alias = "INTENCLR")]
pub type Intenclr = crate::Reg<intenclr::IntenclrSpec>;
#[doc = "MODE1 Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: MODE1 Interrupt Enable Set\n\nYou can [`read`](crate::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
#[doc(alias = "INTENSET")]
pub type Intenset = crate::Reg<intenset::IntensetSpec>;
#[doc = "MODE1 Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: MODE1 Interrupt Flag Status and Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
#[doc(alias = "INTFLAG")]
pub type Intflag = crate::Reg<intflag::IntflagSpec>;
#[doc = "MODE1 Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "STATUS (rw) register accessor: Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
#[doc(alias = "STATUS")]
pub type Status = crate::Reg<status::StatusSpec>;
#[doc = "Status"]
pub mod status;
#[doc = "DBGCTRL (rw) register accessor: Debug Control\n\nYou can [`read`](crate::Reg::read) this register and get [`dbgctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dbgctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dbgctrl`]
module"]
#[doc(alias = "DBGCTRL")]
pub type Dbgctrl = crate::Reg<dbgctrl::DbgctrlSpec>;
#[doc = "Debug Control"]
pub mod dbgctrl;
#[doc = "FREQCORR (rw) register accessor: Frequency Correction\n\nYou can [`read`](crate::Reg::read) this register and get [`freqcorr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`freqcorr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@freqcorr`]
module"]
#[doc(alias = "FREQCORR")]
pub type Freqcorr = crate::Reg<freqcorr::FreqcorrSpec>;
#[doc = "Frequency Correction"]
pub mod freqcorr;
#[doc = "COUNT (rw) register accessor: MODE1 Counter Value\n\nYou can [`read`](crate::Reg::read) this register and get [`count::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`count::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@count`]
module"]
#[doc(alias = "COUNT")]
pub type Count = crate::Reg<count::CountSpec>;
#[doc = "MODE1 Counter Value"]
pub mod count;
#[doc = "PER (rw) register accessor: MODE1 Counter Period\n\nYou can [`read`](crate::Reg::read) this register and get [`per::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`per::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@per`]
module"]
#[doc(alias = "PER")]
pub type Per = crate::Reg<per::PerSpec>;
#[doc = "MODE1 Counter Period"]
pub mod per;
#[doc = "COMP (rw) register accessor: MODE1 Compare n Value\n\nYou can [`read`](crate::Reg::read) this register and get [`comp::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`comp::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@comp`]
module"]
#[doc(alias = "COMP")]
pub type Comp = crate::Reg<comp::CompSpec>;
#[doc = "MODE1 Compare n Value"]
pub mod comp;