apimock-config 6.2.0

//! `Workspace::save()` and `has_unsaved_changes()`, plus the
//! atomic-write helper they depend on.
//!
//! # Atomic write strategy
//!
//! `std::fs::write` is two syscalls (truncate + write); a concurrent
//! reader can catch an empty file between them. We instead route every
//! write through `tempfile::NamedTempFile::persist`, which writes the
//! new contents to a sibling tempfile, syncs, and renames onto the
//! destination. POSIX `rename(2)` is atomic at the directory-entry
//! level; `tempfile` does the right thing on Windows via
//! `MoveFileExW`. A reader either sees the old file or the new file —
//! never a partial one.
//!
//! # Why diff is computed before refreshing baseline
//!
//! The diff summary describes "what this save just flushed to disk",
//! computed against the previous baseline. We capture it before the
//! baseline refresh in `save()` so there's still something to compare
//! against; once `baseline_files` is updated to the freshly-written
//! contents, the diff would always come back empty.

use std::collections::HashMap;
use std::path::{Path, PathBuf};

use crate::error::SaveError;
use crate::view::SaveResult;

use super::Workspace;

impl Workspace {
    /// Save the workspace back to disk.
    ///
    /// # Algorithm
    ///
    /// 1. Render each editable file (root + each rule set) to a
    ///    canonical TOML string *and* an editable-subset `Table`.
    /// 2. Compare the canonical string against `baseline_files`. Files
    ///    whose canonical output is byte-identical to the baseline are
    ///    skipped entirely — nothing about them changed.
    /// 3. For files that *do* differ: first confirm none of them
    ///    changed on disk since we last saw them (RFC 056 §2 Q3) —
    ///    checked for every file before any write, so a conflict on
    ///    one file can't leave another half-written.
    /// 4. Mutate each file's own previous text in place
    ///    (`toml_writer::apply_in_place`) rather than rebuilding it, so
    ///    comments, blank lines and key order survive; only the values
    ///    that actually changed do. Write atomically via
    ///    `tempfile::NamedTempFile::persist` (same-directory rename(2)
    ///    on POSIX, `MoveFileExW` on Windows). On any single-file
    ///    write failure, the partial state is whatever rename(2)s have
    ///    already succeeded — see the type-level docstring on
    ///    `SaveError` for the rationale.
    /// 5. After all writes succeed, refresh `baseline_files` (to the
    ///    canonical string) and `original_text` (to the just-written
    ///    text) so a subsequent save() and conflict check both compare
    ///    against what's now actually on disk.
    /// 6. Compute `DiffItem`s by node, comparing the in-memory state
    ///    to the load-time baseline (parsed; not text-diff).
    /// 7. Compute `requires_reload` / `requires_restart` from the set
    ///    of changed files: changes to `[listener]` need a restart,
    ///    everything else just a reload.
    pub fn save(&mut self) -> Result<SaveResult, SaveError> {
        // --- Render every file's canonical text + editable-subset
        // target table -------------------------------------------------
        let root_target = crate::toml_writer::root_table(&self.config);
        let new_root_toml = crate::toml_writer::render_apimock_toml(&self.config);

        let mut rule_set_renders: Vec<(PathBuf, toml::value::Table, String)> = Vec::new();
        for rule_set in self.config.service.rule_sets.iter() {
            let path = PathBuf::from(rule_set.file_path.as_str());
            let target = crate::toml_writer::rule_set_table(rule_set);
            let text = crate::toml_writer::render_rule_set_toml(rule_set);
            rule_set_renders.push((path, target, text));
        }

        // --- Compute changed-file set ---------------------------------
        // Unchanged in spirit from before RFC 056: compares the
        // canonical render to the canonical baseline, so hand
        // formatting on a never-edited file is never "changed".
        let mut to_write: Vec<(PathBuf, toml::value::Table, String)> = Vec::new();

        let baseline_root = self.baseline_files.get(&self.root_path);
        if baseline_root.map(String::as_str) != Some(new_root_toml.as_str()) {
            to_write.push((self.root_path.clone(), root_target, new_root_toml));
        }
        for (path, target, text) in rule_set_renders {
            let baseline = self.baseline_files.get(&path);
            if baseline.map(String::as_str) != Some(text.as_str()) {
                to_write.push((path, target, text));
            }
        }

        // --- Q3: refuse rather than overwrite a file that changed on
        // disk since load()/save() last saw it. Checked for every file
        // up front, before any write. A read failure (permission
        // denied, the file deleted) is reported as `Read`, not folded
        // into `Conflict` — the two need different remedies, and
        // `Conflict`'s message ("reload before saving") would be
        // actively wrong advice for a permission error. --------------
        for (path, _, _) in &to_write {
            if let Some(original) = self.original_text.get(path) {
                match std::fs::read_to_string(path) {
                    Ok(current) if &current != original => {
                        return Err(SaveError::Conflict { path: path.clone() });
                    }
                    Ok(_) => {}
                    Err(source) => {
                        return Err(SaveError::Read {
                            path: path.clone(),
                            source,
                        });
                    }
                }
            }
        }

        // --- Mutate each file's own previous text in place, so
        // comments / blank lines / key order survive. Falls back to
        // the canonical render only when we never captured original
        // text for a path (see the doc comment on `original_text`). --
        let mut written: Vec<PathBuf> = Vec::with_capacity(to_write.len());
        let mut fresh_text: HashMap<PathBuf, String> = HashMap::new();
        let mut fresh_baseline: HashMap<PathBuf, String> = HashMap::new();
        for (path, target, rendered) in &to_write {
            let text =
                match self.original_text.get(path) {
                    Some(original) => crate::toml_writer::apply_in_place(original, target)
                        .map_err(|source| SaveError::Inconsistent {
                            reason: format!(
                                "`{}` could not be re-parsed for an in-place save: {source}",
                                path.display()
                            ),
                        })?,
                    None => rendered.clone(),
                };
            atomic_write(path, &text)?;
            fresh_text.insert(path.clone(), text);
            fresh_baseline.insert(path.clone(), rendered.clone());
            written.push(path.clone());
        }

        // --- Build diff_summary BEFORE updating baseline ------------
        // The diff is "what did this save flush to disk", computed
        // against the *previous* baseline. Once we refresh the
        // baseline below, every node would compare equal again.
        let diff_summary = self.compute_diff_summary();

        // --- Refresh baselines ----------------------------------------
        for (path, rendered) in fresh_baseline {
            self.baseline_files.insert(path, rendered);
        }
        for (path, text) in fresh_text {
            self.original_text.insert(path, text);
        }
        // Refresh mtime snapshots so has_external_changes() doesn't
        // immediately fire for files we just wrote (RFC 024).
        for path in self.baseline_files.keys() {
            if let Ok(meta) = std::fs::metadata(path)
                && let Ok(modified) = meta.modified()
            {
                self.file_metas.insert(
                    path.clone(),
                    crate::workspace::FileMeta {
                        modified,
                        len: meta.len(),
                    },
                );
            }
        }

        // --- Reload hint --------------------------------------------
        // If the root file (which holds [listener]) was rewritten we
        // conservatively flag a restart. Otherwise rule-set-only changes
        // are a plain reload.
        let listener_changed = written.contains(&self.root_path);
        let requires_reload = listener_changed || !written.is_empty();

        Ok(SaveResult {
            changed_files: written,
            diff_summary,
            requires_reload,
        })
    }
    /// True when at least one editable file's rendered output differs
    /// from its load-time baseline.
    ///
    /// # Use case
    ///
    /// A GUI's "unsaved changes" indicator polls this. Cheap relative
    /// to a full save (no file I/O, just renders + string compares).
    pub fn has_unsaved_changes(&self) -> bool {
        let root_text = crate::toml_writer::render_apimock_toml(&self.config);
        if self.baseline_files.get(&self.root_path).map(|s| s.as_str()) != Some(root_text.as_str())
        {
            return true;
        }
        for rule_set in self.config.service.rule_sets.iter() {
            let path = PathBuf::from(rule_set.file_path.as_str());
            let text = crate::toml_writer::render_rule_set_toml(rule_set);
            if self.baseline_files.get(&path).map(|s| s.as_str()) != Some(text.as_str()) {
                return true;
            }
        }
        false
    }
}

/// Write `text` to `path` atomically.
///
/// # Why a tempfile + persist instead of a direct write
///
/// `std::fs::write` is two syscalls (truncate + write) with a window
/// between them where a concurrent reader can see an empty file. The
/// running apimock server reads its own config files when (eventually)
/// it supports reload; if it picks a moment in the middle of
/// `std::fs::write`, it can fail to parse a half-written TOML.
///
/// `tempfile::NamedTempFile::persist` writes to `<dir>/.tmpXXXX`,
/// `fsync`s, then `rename(2)`s onto the destination — a single
/// directory-entry update that the kernel guarantees is atomic. On
/// Windows, `tempfile` translates this into `MoveFileExW` with the
/// replace-existing flag for the same effect.
///
/// # Error mapping
///
/// `tempfile`'s persist returns a `PersistError` that wraps both the
/// `NamedTempFile` and the underlying `io::Error`. We unwrap the
/// `io::Error` and surface it as `SaveError::Write`. The temp file
/// is dropped automatically (and removed) when the persist error
/// returns.
fn atomic_write(path: &Path, text: &str) -> Result<(), SaveError> {
    let parent = path
        .parent()
        .filter(|p| !p.as_os_str().is_empty())
        .map(Path::to_path_buf)
        .unwrap_or_else(|| PathBuf::from("."));

    let mut tmp = tempfile::NamedTempFile::new_in(&parent).map_err(|e| SaveError::Write {
        path: path.to_path_buf(),
        source: e,
    })?;

    use std::io::Write;
    tmp.write_all(text.as_bytes())
        .map_err(|e| SaveError::Write {
            path: path.to_path_buf(),
            source: e,
        })?;
    tmp.flush().map_err(|e| SaveError::Write {
        path: path.to_path_buf(),
        source: e,
    })?;

    tmp.persist(path).map_err(|persist_err| SaveError::Write {
        path: path.to_path_buf(),
        source: persist_err.error,
    })?;
    Ok(())
}