agentplane 0.26.0

//! Retry policy — how many times, how long apart, and when not at all.
//!
//! # Retrying is a safety decision before it is a reliability one
//!
//! Most runtimes treat retry as a reliability knob: the call failed, try again,
//! and push idempotency onto whoever wrote the tool. That is a defensible
//! trade when the worst case is a duplicate log line. It is the wrong trade
//! when the worst case is a duplicate payment, and it is wrong in a way that
//! only shows up in production, on the one call that timed out.
//!
//! So a policy here never decides alone. Three things do, in order:
//!
//! 1. The failure's [`Disposition`](crate::core::Disposition) — did the call
//!    reach the outside world? A refused connection and a timed-out request are
//!    both transient, and only one of them is safe to repeat.
//! 2. The effect's [`Recovery`](crate::core::Recovery) — for an in-doubt
//!    failure, is guessing permitted at all?
//! 3. This policy — and only then, how many times and how far apart.
//!
//! A policy cannot authorise a repeat that the first two refuse. Raising
//! `max_attempts` never makes a mutating in-doubt call retryable.
//!
//! # Backoff waits in-process, and that is deliberate
//!
//! A retry's backoff is a `tokio` sleep, so it holds the worker for its
//! duration. `max_backoff` is therefore not just a schedule ceiling — it is the
//! bound on how long one effect can occupy a frame, and it is why the default
//! is seconds rather than minutes.
//!
//! Suspending instead would be strictly worse here. Waking a suspended run
//! replays it from the beginning, so a run fifty steps deep pays fifty steps of
//! replay to avoid a five-second sleep. Durable suspension wins for waits
//! measured in minutes and hours; in-process wins for the seconds-scale jitter
//! that retry actually needs.
//!
//! So the boundary is drawn by purpose, not by duration:
//!
//! * **Retrying a flaky call** — this module. Bounded by `max_backoff`.
//! * **Waiting for the world** — a settlement date, five Werktage — is not a
//!   retry. Use [`StepCtx::sleep`](crate::runtime::StepCtx::sleep), which
//!   suspends the run and costs a row rather than a thread.
//!
//! Setting `max_backoff` to an hour is legal and will hold a worker for an
//! hour. That is stated rather than prevented, because a deployment that knows
//! its own concurrency may want exactly that.
//!
//! # Backoff is computed, not drawn — unless the peer names it
//!
//! The runtime forbids ambient randomness, so jitter cannot come from an RNG.
//! It is derived instead from the hash of the run, the effect key, and the
//! attempt number — which decorrelates concurrent runs the way jitter is
//! supposed to, while staying a pure function of things already in the journal.
//!
//! A computed schedule is a **guess about when a service recovers**, and one
//! failure does not need guessing at: a peer that answers *rate limited* and
//! names its own window. So advice wins where a peer gives it, bounded by
//! [`max_advice`](RetryPolicy::max_advice). The parsing rule is
//! [`retry_after_seconds`], shared by every wire here so no surface acts on
//! advice another would refuse.

use std::time::Duration;

use serde::{Deserialize, Serialize};

use crate::core::{Digest, EffectKey, RunId};

/// How many times to repeat a failed effect, and how far apart.
///
/// The defaults are safe rather than timid: three attempts with exponential
/// backoff. They are safe *because* [`Disposition`](crate::core::Disposition)
/// gates them — an effect whose failure is in-doubt is not repeated under this
/// policy unless its [`Recovery`](crate::core::Recovery) permits guessing, no
/// matter what `max_attempts` says.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize)]
pub struct RetryPolicy {
    /// Total attempts including the first. `1` means "never repeat".
    pub max_attempts: u32,
    /// Delay before the second attempt.
    pub initial_backoff: Duration,
    /// Ceiling on the delay, however many attempts have passed.
    ///
    /// Also the bound on how long one effect holds a worker — see the module
    /// docs. For waits longer than a few seconds, the run should suspend
    /// instead: that is [`StepCtx::sleep`](crate::runtime::StepCtx::sleep), not
    /// a retry policy.
    pub max_backoff: Duration,
    /// Growth factor per attempt. An integer, so the schedule is exactly
    /// reproducible on any platform without depending on float rounding.
    pub multiplier: u32,
    /// Whether to spread the delay across runs. See the module docs — this is
    /// derived from a hash, not drawn from an RNG.
    pub jitter: bool,
    /// The longest this run will wait because a *peer* named a time.
    ///
    /// A separate ceiling from [`max_backoff`](Self::max_backoff), because the
    /// two bound different risks. `max_backoff` bounds a **guess**: nobody knows
    /// when the service recovers, so waiting long is waste. This bounds
    /// **somebody else's word** — a `Retry-After` from the one party with an
    /// interest in never being called again — and the number that makes the
    /// wait useful is theirs, not ours. Sharing one ceiling would mean either
    /// guessing for as long as a peer may demand, or discarding advice that is
    /// merely longer than a guess would have been.
    ///
    /// A minute covers every published provider rate-limit window and is short
    /// enough that a hostile or broken value costs one wasted minute of one
    /// worker. Advice past it is **clamped, not discarded**: waiting part of a
    /// window is closer to right than ignoring it, and if the window really was
    /// longer the next refusal names what is left.
    ///
    /// Raising it holds a worker for that long. A rate limit measured in more
    /// than minutes is not a retry at all — that is
    /// [`StepCtx::sleep`](crate::runtime::StepCtx::sleep), which costs a row.
    pub max_advice: Duration,
}

impl Default for RetryPolicy {
    fn default() -> Self {
        Self {
            max_attempts: 3,
            initial_backoff: Duration::from_millis(100),
            max_backoff: Duration::from_secs(10),
            multiplier: 2,
            jitter: true,
            max_advice: Duration::from_secs(60),
        }
    }
}

impl RetryPolicy {
    /// Never repeat. The first failure is final.
    ///
    /// The right choice for an effect that is expensive, externally rate
    /// limited, or whose driver already retries internally — a policy stacked
    /// on a driver that retries is a multiplication, not an addition.
    #[must_use]
    pub const fn never() -> Self {
        Self {
            max_attempts: 1,
            initial_backoff: Duration::ZERO,
            max_backoff: Duration::ZERO,
            multiplier: 1,
            jitter: false,
            // Nothing to advise: there is no second attempt to schedule.
            max_advice: Duration::ZERO,
        }
    }

    /// `n` total attempts with the default backoff schedule.
    #[must_use]
    pub fn attempts(n: u32) -> Self {
        Self {
            max_attempts: n.max(1),
            ..Self::default()
        }
    }

    /// Replace the backoff schedule, keeping the attempt count.
    #[must_use]
    pub fn with_backoff(mut self, initial: Duration, max: Duration) -> Self {
        self.initial_backoff = initial;
        self.max_backoff = max;
        self
    }

    /// Turn jitter off, making the schedule identical across runs.
    #[must_use]
    pub fn without_jitter(mut self) -> Self {
        self.jitter = false;
        self
    }

    /// Change how long a peer's own `Retry-After` may hold a worker.
    ///
    /// See [`max_advice`](Self::max_advice) for why this is not `max_backoff`.
    #[must_use]
    pub const fn wait_at_most(mut self, advice: Duration) -> Self {
        self.max_advice = advice;
        self
    }

    /// How long to wait before `attempt`, given whatever the peer said.
    ///
    /// `advice` wins when present, clamped to [`max_advice`](Self::max_advice),
    /// **including when it is shorter** than the computed backoff: the peer is
    /// describing its own recovery, and waiting longer than it asked buys
    /// nothing.
    #[must_use]
    pub fn wait_before(
        &self,
        run: RunId,
        key: EffectKey,
        attempt: u32,
        advice: Option<Duration>,
    ) -> Duration {
        // Attempt 1 is not a retry, so nothing schedules it — not even a peer.
        // Advice can only arrive attached to a failure, so this guard is
        // belt-and-braces rather than reachable, and it keeps the one property
        // every caller relies on: the first attempt is immediate.
        if attempt <= 1 {
            return Duration::ZERO;
        }
        match advice {
            Some(named) if !named.is_zero() => named.min(self.max_advice),
            _ => self.backoff(run, key, attempt),
        }
    }

    /// Whether another attempt is left after `attempt` has failed.
    ///
    /// `attempt` is 1-based, matching what the journal records.
    #[must_use]
    pub fn permits(&self, attempt: u32) -> bool {
        attempt < self.max_attempts
    }

    /// How long to wait before `attempt` (1-based; attempt 1 never waits).
    ///
    /// Exponential with an integer multiplier and a ceiling, then optionally
    /// spread by a hash-derived factor in `[0.5, 1.0]` of the computed delay.
    /// Halving rather than scaling from zero keeps a floor under the schedule:
    /// full jitter can pick a near-zero delay and hammer a service that is
    /// already struggling.
    #[must_use]
    pub fn backoff(&self, run: RunId, key: EffectKey, attempt: u32) -> Duration {
        if attempt <= 1 {
            return Duration::ZERO;
        }

        // Saturating throughout: a large multiplier and a large attempt count
        // must produce `max_backoff`, not an overflow panic.
        let steps = attempt - 2;
        let mut delay = self.initial_backoff;
        for _ in 0..steps {
            delay = delay
                .saturating_mul(self.multiplier.max(1))
                .min(self.max_backoff);
            if delay >= self.max_backoff {
                break;
            }
        }
        let delay = delay.min(self.max_backoff);

        if !self.jitter || delay.is_zero() {
            return delay;
        }

        // Deterministic stand-in for an RNG draw. Including the run id is what
        // decorrelates two runs of the same plan retrying the same effect —
        // without it, identical keys would produce identical schedules and
        // reconverge into exactly the thundering herd jitter exists to prevent.
        let mut seed = Vec::with_capacity(64);
        seed.extend_from_slice(run.to_string().as_bytes());
        seed.extend_from_slice(&key.to_hex().into_bytes());
        seed.extend_from_slice(&attempt.to_be_bytes());
        let digest = Digest::of(&seed);
        let spread = u64::from_be_bytes(digest.as_bytes()[..8].try_into().expect("8 bytes"));

        // Map into [0.5, 1.0] of the computed delay, in integer arithmetic.
        let half = delay.as_nanos() / 2;
        let extra = (half.saturating_mul(u128::from(spread))) / u128::from(u64::MAX);
        Duration::from_nanos(u64::try_from(half + extra).unwrap_or(u64::MAX))
    }
}

/// Parse a `Retry-After` value into seconds.
///
/// Only the delta-seconds form is read. The HTTP-date form is equally legal and
/// is deliberately ignored: acting on it means trusting the sender's clock
/// against ours, and a peer whose clock is a day fast would park a run for a
/// day. A value this cannot read is *no advice*, which is the same answer as an
/// absent header — the caller's own schedule applies.
///
/// Here rather than beside either caller because it is the same question on
/// every wire this crate speaks, and two spellings of a bound are two bounds:
/// the one that drifts is whichever surface nobody probed.
#[must_use]
pub fn retry_after_seconds(value: &str) -> Option<u64> {
    let seconds = value.trim().parse::<u64>().ok()?;
    // Zero is a legal encoding of "come back immediately", and taking it
    // literally would replace the caller's backoff with no wait at all — which
    // is the one schedule a rate limit must not produce.
    (seconds > 0).then_some(seconds)
}

#[cfg(test)]
mod tests {
    use super::*;
    use crate::core::StepId;

    fn key() -> EffectKey {
        EffectKey::derive(
            StepId(1),
            crate::core::Phase::Forward,
            0,
            1,
            "test.effect",
            b"{}",
        )
    }

    #[test]
    fn the_first_attempt_never_waits() {
        assert_eq!(
            RetryPolicy::default().backoff(RunId::generate(), key(), 1),
            Duration::ZERO
        );
    }

    /// `without_jitter` turns jitter off and changes nothing else.
    ///
    /// Every existing schedule test builds `RetryPolicy` by struct literal with
    /// `jitter: false`, so the builder a caller actually reaches for had no test
    /// at all — and a `without_jitter` that set the wrong field would leave the
    /// schedule non-deterministic while reading as though it had fixed it.
    #[test]
    fn without_jitter_makes_the_schedule_reproducible() {
        let jittered = RetryPolicy::default();
        let fixed = RetryPolicy::default().without_jitter();

        assert!(jittered.jitter, "the default is jittered");
        assert!(!fixed.jitter);
        assert_eq!(
            fixed.max_attempts, jittered.max_attempts,
            "turning jitter off must not move the attempt ceiling"
        );
        assert_eq!(fixed.initial_backoff, jittered.initial_backoff);
        assert_eq!(fixed.max_backoff, jittered.max_backoff);

        // The property jitter removal is *for*: two runs of the same effect now
        // wait the same amount. With jitter on, the run id decorrelates them.
        let key = key();
        let (a, b) = (RunId::generate(), RunId::generate());
        assert_eq!(fixed.backoff(a, key, 3), fixed.backoff(b, key, 3));
    }

    #[test]
    fn backoff_grows_and_then_stops_at_the_ceiling() {
        let p = RetryPolicy {
            max_attempts: 10,
            initial_backoff: Duration::from_millis(100),
            max_backoff: Duration::from_millis(800),
            multiplier: 2,
            jitter: false,
            ..RetryPolicy::default()
        };
        let run = RunId::generate();
        let at = |n| p.backoff(run, key(), n);
        assert_eq!(at(2), Duration::from_millis(100));
        assert_eq!(at(3), Duration::from_millis(200));
        assert_eq!(at(4), Duration::from_millis(400));
        assert_eq!(at(5), Duration::from_millis(800));
        assert_eq!(at(6), Duration::from_millis(800), "ceiling holds");
        assert_eq!(at(50), Duration::from_millis(800), "and keeps holding");
    }

    #[test]
    fn an_absurd_schedule_saturates_instead_of_panicking() {
        let p = RetryPolicy {
            max_attempts: u32::MAX,
            initial_backoff: Duration::from_secs(1),
            max_backoff: Duration::from_mins(1),
            multiplier: u32::MAX,
            jitter: true,
            ..RetryPolicy::default()
        };
        assert!(p.backoff(RunId::generate(), key(), u32::MAX) <= Duration::from_mins(1));
    }

    #[test]
    fn jitter_stays_within_half_the_delay() {
        let p = RetryPolicy {
            jitter: true,
            ..RetryPolicy::default()
        };
        let run = RunId::generate();
        for attempt in 2..8 {
            let d = p.backoff(run, key(), attempt);
            let plain = RetryPolicy { jitter: false, ..p }.backoff(run, key(), attempt);
            assert!(
                d >= plain / 2 && d <= plain,
                "attempt {attempt}: {d:?} outside [{:?}, {plain:?}]",
                plain / 2
            );
        }
    }

    #[test]
    fn jitter_decorrelates_runs_but_repeats_for_one_run() {
        let (a, b) = (RunId::generate(), RunId::generate());
        let p = RetryPolicy::default();
        assert_ne!(
            p.backoff(a, key(), 3),
            p.backoff(b, key(), 3),
            "two runs retrying the same effect must not reconverge"
        );
        assert_eq!(
            p.backoff(a, key(), 3),
            p.backoff(a, key(), 3),
            "and the schedule must be a pure function, not a draw"
        );
    }

    #[test]
    fn never_permits_no_second_attempt() {
        assert!(!RetryPolicy::never().permits(1));
        assert!(RetryPolicy::attempts(3).permits(1));
        assert!(RetryPolicy::attempts(3).permits(2));
        assert!(!RetryPolicy::attempts(3).permits(3));
    }
}