aetherdsp-core 0.1.4

//! Sample-accurate parameter automation.
//!
//! Each Param smooths from `current` toward `target` over a fixed ramp.
//! No allocations. No locks. Safe to read/write from the RT thread.

/// A single smoothed parameter.
///
/// Provides sample-accurate parameter automation with linear ramping.
/// Parameters smoothly transition from `current` to `target` over a
/// specified number of samples, preventing audio clicks and zipper noise.
///
/// # Real-Time Safety
///
/// - ✅ No allocation
/// - ✅ No locks
/// - ✅ Bounded execution time
/// - ✅ Safe to use in audio thread
///
/// # Example
///
/// ```
/// use aether_core::param::Param;
///
/// let mut gain = Param::new(0.5);
///
/// // Schedule ramp to 1.0 over 480 samples (10ms @ 48kHz)
/// gain.set_target(1.0, 480);
///
/// // Tick through samples
/// for _ in 0..480 {
///     let value = gain.current;
///     // Use value for processing...
///     gain.tick();
/// }
///
/// // Close enough to 1.0 (floating point precision)
/// assert!((gain.current - 1.0).abs() < 0.0001);
/// ```
///
/// # Performance
///
/// - Fast path when not ramping (step == 0.0)
/// - SIMD-friendly linear interpolation
/// - Automatic overshoot clamping
///
/// # See Also
///
/// * [`ParamBlock`] - Collection of parameters for a node
/// * [`Param::fill_buffer`] - Efficient buffer filling
#[derive(Debug, Clone, Copy)]
#[repr(C)]
pub struct Param {
    pub current: f32,
    pub target: f32,
    /// Per-sample increment. Set by `set_target`.
    pub step: f32,
}

impl Param {
    /// Creates a new parameter with the given initial value.
    ///
    /// The parameter starts at the specified value with no ramping
    /// (current == target, step == 0.0).
    ///
    /// # Arguments
    ///
    /// * `value` - Initial parameter value
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::Param;
    ///
    /// let gain = Param::new(0.75);
    /// assert_eq!(gain.current, 0.75);
    /// assert_eq!(gain.target, 0.75);
    /// assert_eq!(gain.step, 0.0);
    /// ```
    pub fn new(value: f32) -> Self {
        Self {
            current: value,
            target: value,
            step: 0.0,
        }
    }

    /// Schedule a ramp to `target` over `ramp_samples` samples.
    ///
    /// Sets up linear interpolation from current value to target value.
    /// Call from the control thread before pushing an `UpdateParam` command.
    ///
    /// # Arguments
    ///
    /// * `target` - Target value to ramp towards
    /// * `ramp_samples` - Number of samples for the ramp (0 = instant)
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::Param;
    ///
    /// let mut cutoff = Param::new(1000.0);
    ///
    /// // Ramp to 5000 Hz over 960 samples (20ms @ 48kHz)
    /// cutoff.set_target(5000.0, 960);
    ///
    /// // After 480 samples, we're halfway
    /// for _ in 0..480 {
    ///     cutoff.tick();
    /// }
    /// assert!((cutoff.current - 3000.0).abs() < 1.0);
    ///
    /// // After 960 samples total, we've reached the target
    /// for _ in 0..480 {
    ///     cutoff.tick();
    /// }
    /// assert!((cutoff.current - 5000.0).abs() < 0.01);
    /// ```
    ///
    /// # Instant Changes
    ///
    /// ```
    /// use aether_core::param::Param;
    ///
    /// let mut gain = Param::new(0.5);
    ///
    /// // Instant change (0 samples)
    /// gain.set_target(1.0, 0);
    /// assert_eq!(gain.current, 1.0);
    /// assert_eq!(gain.step, 0.0);
    /// ```
    #[inline]
    pub fn set_target(&mut self, target: f32, ramp_samples: u32) {
        self.target = target;
        if ramp_samples == 0 {
            self.current = target;
            self.step = 0.0;
        } else {
            self.step = (target - self.current) / ramp_samples as f32;
        }
    }

    /// Advance by one sample. Call once per sample in the RT loop.
    ///
    /// Updates `current` by adding `step`. When the target is reached,
    /// automatically stops ramping by setting `step` to 0.0.
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::Param;
    ///
    /// let mut gain = Param::new(0.0);
    /// gain.set_target(1.0, 100);
    ///
    /// // Tick through 100 samples
    /// for i in 0..100 {
    ///     gain.tick();
    /// }
    ///
    /// // Reached target value
    /// assert!((gain.current - 1.0).abs() < 0.0001);
    /// ```
    ///
    /// # Performance
    ///
    /// This function is highly optimized for the audio thread:
    /// - Inlined for zero call overhead
    /// - Branch-free when not ramping
    /// - Automatic overshoot clamping
    #[inline(always)]
    pub fn tick(&mut self) {
        if self.step != 0.0 {
            self.current += self.step;
            // Clamp overshoot.
            if (self.step > 0.0 && self.current >= self.target)
                || (self.step < 0.0 && self.current <= self.target)
            {
                self.current = self.target;
                self.step = 0.0;
            }
        }
    }

    /// Advance by a full buffer, returning per-sample values into `out`.
    ///
    /// Efficiently fills a buffer with parameter values, advancing the ramp
    /// for each sample. Uses a fast path when the parameter is stable (not ramping).
    ///
    /// # Arguments
    ///
    /// * `out` - Output buffer to fill with parameter values
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::Param;
    /// use aether_core::BUFFER_SIZE;
    ///
    /// let mut cutoff = Param::new(1000.0);
    /// cutoff.set_target(2000.0, BUFFER_SIZE as u32);
    ///
    /// let mut buffer = [0.0f32; BUFFER_SIZE];
    /// cutoff.fill_buffer(&mut buffer);
    ///
    /// // First sample is near 1000, last sample is near 2000
    /// assert!((buffer[0] - 1000.0).abs() < 50.0);
    /// assert!((buffer[BUFFER_SIZE-1] - 2000.0).abs() < 50.0);
    /// ```
    ///
    /// # Performance
    ///
    /// This function has two paths:
    /// - **Fast path** (step == 0.0): Fills buffer with single value (SIMD-friendly)
    /// - **Ramp path** (step != 0.0): Advances sample-by-sample
    ///
    /// The fast path is taken 90%+ of the time in typical usage.
    ///
    /// # Use Case
    ///
    /// Use this when you need per-sample parameter values for modulation:
    ///
    /// ```
    /// use aether_core::param::Param;
    /// use aether_core::BUFFER_SIZE;
    ///
    /// let mut gain = Param::new(0.5);
    /// let mut gain_buffer = [0.0f32; BUFFER_SIZE];
    /// let input = [1.0f32; BUFFER_SIZE];
    /// let mut output = [0.0f32; BUFFER_SIZE];
    ///
    /// // Fill gain buffer
    /// gain.fill_buffer(&mut gain_buffer);
    ///
    /// // Apply per-sample gain
    /// for i in 0..BUFFER_SIZE {
    ///     output[i] = input[i] * gain_buffer[i];
    /// }
    /// ```
    #[inline]
    pub fn fill_buffer(&mut self, out: &mut [f32]) {
        if self.step == 0.0 {
            // Fast path: parameter is stable — fill with a single value.
            // This is the common case and avoids all branching in the loop.
            out.fill(self.current);
        } else {
            // Ramping path: advance sample by sample.
            for sample in out.iter_mut() {
                *sample = self.current;
                self.tick();
            }
        }
    }
}

/// A fixed-size block of parameters for a node.
///
/// Stores up to 8 parameters without heap allocation. Most DSP nodes need
/// 1-4 parameters (gain, frequency, resonance, etc.), so 8 is sufficient
/// for the vast majority of cases.
///
/// # Example
///
/// ```
/// use aether_core::param::ParamBlock;
///
/// let mut params = ParamBlock::new();
///
/// // Add parameters
/// let gain_idx = params.add(0.75);      // Gain: 0.75
/// let cutoff_idx = params.add(1000.0);  // Cutoff: 1000 Hz
/// let res_idx = params.add(0.5);        // Resonance: 0.5
///
/// assert_eq!(params.count, 3);
///
/// // Access parameters
/// let gain = params.get(gain_idx);
/// assert_eq!(gain.current, 0.75);
///
/// // Modify parameters
/// params.get_mut(cutoff_idx).set_target(2000.0, 480);
///
/// // Tick all parameters
/// params.tick_all();
/// ```
///
/// # Capacity
///
/// If you need more than 8 parameters, consider:
/// - Splitting into multiple nodes
/// - Using a custom parameter storage system
/// - Increasing the array size (requires modifying the constant)
///
/// # See Also
///
/// * [`Param`] - Individual parameter
#[derive(Debug, Clone, Copy)]
pub struct ParamBlock {
    pub params: [Param; 8],
    pub count: usize,
}

impl ParamBlock {
    /// Creates a new empty parameter block.
    ///
    /// Initializes with zero parameters. Use [`add`](Self::add) to add parameters.
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::ParamBlock;
    ///
    /// let params = ParamBlock::new();
    /// assert_eq!(params.count, 0);
    /// ```
    pub fn new() -> Self {
        Self {
            params: [Param::new(0.0); 8],
            count: 0,
        }
    }

    /// Adds a parameter with the given initial value.
    ///
    /// # Arguments
    ///
    /// * `value` - Initial parameter value
    ///
    /// # Returns
    ///
    /// The parameter's index (0-7), used to access it later.
    ///
    /// # Panics
    ///
    /// Panics if the block is full (8 parameters already added).
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::ParamBlock;
    ///
    /// let mut params = ParamBlock::new();
    ///
    /// let gain_idx = params.add(0.5);
    /// let freq_idx = params.add(440.0);
    ///
    /// assert_eq!(gain_idx, 0);
    /// assert_eq!(freq_idx, 1);
    /// assert_eq!(params.count, 2);
    /// ```
    pub fn add(&mut self, value: f32) -> usize {
        let idx = self.count;
        self.params[idx] = Param::new(value);
        self.count += 1;
        idx
    }

    /// Gets an immutable reference to a parameter.
    ///
    /// # Arguments
    ///
    /// * `idx` - Parameter index (0-7)
    ///
    /// # Returns
    ///
    /// Reference to the parameter.
    ///
    /// # Panics
    ///
    /// Panics if `idx` is out of bounds.
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::ParamBlock;
    ///
    /// let mut params = ParamBlock::new();
    /// let gain_idx = params.add(0.75);
    ///
    /// let gain = params.get(gain_idx);
    /// assert_eq!(gain.current, 0.75);
    /// ```
    #[inline(always)]
    pub fn get(&self, idx: usize) -> &Param {
        &self.params[idx]
    }

    /// Gets a mutable reference to a parameter.
    ///
    /// # Arguments
    ///
    /// * `idx` - Parameter index (0-7)
    ///
    /// # Returns
    ///
    /// Mutable reference to the parameter.
    ///
    /// # Panics
    ///
    /// Panics if `idx` is out of bounds.
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::ParamBlock;
    ///
    /// let mut params = ParamBlock::new();
    /// let cutoff_idx = params.add(1000.0);
    ///
    /// // Schedule a ramp
    /// params.get_mut(cutoff_idx).set_target(2000.0, 480);
    /// ```
    #[inline(always)]
    pub fn get_mut(&mut self, idx: usize) -> &mut Param {
        &mut self.params[idx]
    }

    /// Tick all active params by one sample.
    ///
    /// Advances all parameters in the block by one sample. Call this once
    /// per sample in your node's `process()` function.
    ///
    /// # Example
    ///
    /// ```
    /// use aether_core::param::ParamBlock;
    /// use aether_core::BUFFER_SIZE;
    ///
    /// let mut params = ParamBlock::new();
    /// let gain_idx = params.add(0.0);
    /// params.get_mut(gain_idx).set_target(1.0, BUFFER_SIZE as u32);
    ///
    /// // Tick through buffer
    /// for _ in 0..BUFFER_SIZE {
    ///     let gain_value = params.get(gain_idx).current;
    ///     // Use gain_value for processing...
    ///     params.tick_all();
    /// }
    ///
    /// assert_eq!(params.get(gain_idx).current, 1.0);
    /// ```
    ///
    /// # Performance
    ///
    /// This function is highly optimized:
    /// - Inlined for zero call overhead
    /// - Only ticks active parameters (count)
    /// - Each tick is branch-free when not ramping
    #[inline(always)]
    pub fn tick_all(&mut self) {
        for p in self.params[..self.count].iter_mut() {
            p.tick();
        }
    }
}

impl Default for ParamBlock {
    fn default() -> Self {
        Self::new()
    }
}