Struct cosmwasm_std::Addr[−][src]

pub struct Addr(_);

Expand description

A human readable address.

In Cosmos, this is typically bech32 encoded. But for multi-chain smart contracts no assumptions should be made other than being UTF-8 encoded and of reasonable length.

This type represents a validated address. It can be created in the following ways

Use Addr::unchecked(input)
Use let checked: Addr = deps.api.addr_validate(input)?
Use let checked: Addr = deps.api.addr_humanize(canonical_addr)?
Deserialize from JSON. This must only be done from JSON that was validated before such as a contract’s state. Addr must not be used in messages sent by the user because this would result in unvalidated instances.

This type is immutable. If you really need to mutate it (Really? Are you sure?), create a mutable copy using let mut mutable = Addr::to_string() and operate on that String instance.

Implementations

impl Addr

pub fn unchecked<T: Into<String>>(input: T) -> Addr

Creates a new Addr instance from the given input without checking the validity of the input. Since Addr must always contain valid addresses, the caller is responsible for ensuring the input is valid.

Use this in cases where the address was validated before or in test code. If you see this in contract code, it should most likely be replaced with let checked: Addr = deps.api.addr_humanize(canonical_addr)?.

Examples

let address = Addr::unchecked("foobar");
assert_eq!(address, "foobar");

pub fn as_str(&self) -> &str

pub fn as_bytes(&self) -> &[u8]

Returns the UTF-8 encoded address string as a byte array.

This is equivalent to address.as_str().as_bytes().

Trait Implementations

impl AsRef<str> for Addr

fn as_ref(&self) -> &str

Performs the conversion.

impl Clone for Addr

fn clone(&self) -> Addr

Returns a copy of the value. Read more

1.0.0[src]

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for Addr

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl<'de> Deserialize<'de> for Addr

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
    __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more

impl Display for Addr

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl From<&'_ Addr> for String

fn from(addr: &Addr) -> Self

Performs the conversion.

impl From<&'_ Addr> for HumanAddr

fn from(addr: &Addr) -> Self

Performs the conversion.

impl From<Addr> for String

fn from(addr: Addr) -> Self

Performs the conversion.

impl From<Addr> for HumanAddr

fn from(addr: Addr) -> Self

Performs the conversion.

impl Hash for Addr

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more

1.3.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher,

Feeds a slice of this type into the given Hasher. Read more

impl JsonSchema for Addr

fn schema_name() -> String

The name of the generated JSON Schema. Read more

fn json_schema(gen: &mut SchemaGenerator) -> Schema

Generates a JSON Schema for this type. Read more

fn is_referenceable() -> bool

Whether JSON Schemas generated for this type should be re-used where possible using the $ref keyword. Read more

impl Ord for Addr

fn cmp(&self, other: &Addr) -> Ordering

This method returns an Ordering between self and other. Read more

1.21.0[src]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values. Read more

1.21.0[src]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values. Read more

1.50.0[src]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval. Read more

impl PartialEq<&'_ str> for Addr

Implement Addr == &str

fn eq(&self, rhs: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0[src]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<Addr> for Addr

fn eq(&self, other: &Addr) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

fn ne(&self, other: &Addr) -> bool

This method tests for !=.

impl PartialEq<Addr> for &str

Implement &str == Addr

fn eq(&self, rhs: &Addr) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0[src]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<Addr> for String

Implement String == Addr

fn eq(&self, rhs: &Addr) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0[src]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<String> for Addr

Implement Addr == String

fn eq(&self, rhs: &String) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0[src]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialOrd<Addr> for Addr

fn partial_cmp(&self, other: &Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

1.0.0[src]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0[src]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0[src]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0[src]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl Serialize for Addr

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
    __S: Serializer,

Serialize this value into the given Serde serializer. Read more

impl Eq for Addr

impl StructuralEq for Addr

impl StructuralPartialEq for Addr

Auto Trait Implementations

impl RefUnwindSafe for Addr

impl Send for Addr

impl Sync for Addr

impl Unpin for Addr

impl UnwindSafe for Addr

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T where
    T: ?Sized,

pub fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T where
    T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Conv for T

fn conv<T>(self) -> T where
    Self: Into<T>,

Converts self into a target type. Read more

impl<T> DynClone for T where
    T: Clone,

pub fn __clone_box(&self, Private) -> *mut ()

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self> where
    Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self> where
    Self: Display,

Causes self to use its Display implementation when Debug-formatted. Read more

fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
    Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted. Read more

fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
    Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted. Read more

fn fmt_octal(self) -> FmtOctal<Self> where
    Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self> where
    Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted. Read more

fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
    Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted. Read more

fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
    Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted. Read more

impl<T> From<T> for T

pub fn from(t: T) -> T

Performs the conversion.

impl<T, U> Into<U> for T where
    U: From<T>,

pub fn into(self) -> U

Performs the conversion.

impl<T> Pipe for T

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

impl<T> PipeAsRef for T

fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
    Self: AsRef<T>,
    T: 'a,
    R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
    Self: AsMut<T>,
    T: 'a,
    R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

impl<T> PipeBorrow for T

fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
    Self: Borrow<T>,
    T: 'a,
    R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

fn pipe_borrow_mut<'a, T, R>(
    &'a mut self, 
    func: impl FnOnce(&'a mut T) -> R
) -> R where
    Self: BorrowMut<T>,
    T: 'a,
    R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

impl<T> PipeDeref for T

fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
    Self: Deref,
    R: 'a,

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

fn pipe_deref_mut<'a, R>(
    &'a mut self, 
    func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
    Self: DerefMut,
    R: 'a,

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

impl<T> PipeRef for T

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
    R: 'a,

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

fn pipe_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
    R: 'a,

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T> Tap for T

fn tap<F, R>(self, func: F) -> Self where
    F: FnOnce(&Self) -> R,

Provides immutable access for inspection. Read more

fn tap_dbg<F, R>(self, func: F) -> Self where
    F: FnOnce(&Self) -> R,

Calls tap in debug builds, and does nothing in release builds.

fn tap_mut<F, R>(self, func: F) -> Self where
    F: FnOnce(&mut Self) -> R,

Provides mutable access for modification. Read more

fn tap_mut_dbg<F, R>(self, func: F) -> Self where
    F: FnOnce(&mut Self) -> R,

Calls tap_mut in debug builds, and does nothing in release builds.

impl<T, U> TapAsRef<U> for T where
    U: ?Sized,

fn tap_ref<F, R>(self, func: F) -> Self where
    Self: AsRef<T>,
    F: FnOnce(&T) -> R,

Provides immutable access to the reference for inspection.

fn tap_ref_dbg<F, R>(self, func: F) -> Self where
    Self: AsRef<T>,
    F: FnOnce(&T) -> R,

Calls tap_ref in debug builds, and does nothing in release builds.

fn tap_ref_mut<F, R>(self, func: F) -> Self where
    Self: AsMut<T>,
    F: FnOnce(&mut T) -> R,

Provides mutable access to the reference for modification.

fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
    Self: AsMut<T>,
    F: FnOnce(&mut T) -> R,

Calls tap_ref_mut in debug builds, and does nothing in release builds.

impl<T, U> TapBorrow<U> for T where
    U: ?Sized,

fn tap_borrow<F, R>(self, func: F) -> Self where
    Self: Borrow<T>,
    F: FnOnce(&T) -> R,

Provides immutable access to the borrow for inspection. Read more

fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
    Self: Borrow<T>,
    F: FnOnce(&T) -> R,

Calls tap_borrow in debug builds, and does nothing in release builds.

fn tap_borrow_mut<F, R>(self, func: F) -> Self where
    Self: BorrowMut<T>,
    F: FnOnce(&mut T) -> R,

Provides mutable access to the borrow for modification.

fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
    Self: BorrowMut<T>,
    F: FnOnce(&mut T) -> R,

Calls tap_borrow_mut in debug builds, and does nothing in release builds. Read more

impl<T> TapDeref for T

fn tap_deref<F, R>(self, func: F) -> Self where
    Self: Deref,
    F: FnOnce(&Self::Target) -> R,

Immutably dereferences self for inspection.

fn tap_deref_dbg<F, R>(self, func: F) -> Self where
    Self: Deref,
    F: FnOnce(&Self::Target) -> R,

Calls tap_deref in debug builds, and does nothing in release builds.

fn tap_deref_mut<F, R>(self, func: F) -> Self where
    Self: DerefMut,
    F: FnOnce(&mut Self::Target) -> R,

Mutably dereferences self for modification.

fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
    Self: DerefMut,
    F: FnOnce(&mut Self::Target) -> R,

Calls tap_deref_mut in debug builds, and does nothing in release builds. Read more

impl<T> ToOwned for T where
    T: Clone,

type Owned = T

The resulting type after obtaining ownership.

pub fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

pub fn clone_into(&self, target: &mut T)

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> ToString for T where
    T: Display + ?Sized,

pub default fn to_string(&self) -> String

Converts the given value to a String. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error> where
    Self: TryInto<T>,

Attempts to convert self into a target type. Read more

impl<T, U> TryFrom<U> for T where
    U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<T> DeserializeOwned for T where
    T: for<'de> Deserialize<'de>,