Enum PixelFormat

Source
#[non_exhaustive]
pub enum PixelFormat {
Show 31 variants Any, A8, Rgb565, Rgba4444, Rgba5551, Yuv, G8, Rg88, Rgb888, Bgr888, Rgba8888, Bgra8888, Argb8888, Abgr8888, Rgba1010102, Bgra1010102, Argb2101010, Abgr2101010, Rgba8888Pre, Bgra8888Pre, Argb8888Pre, Abgr8888Pre, Rgba4444Pre, Rgba5551Pre, Rgba1010102Pre, Bgra1010102Pre, Argb2101010Pre, Abgr2101010Pre, Depth16, Depth32, Depth24Stencil8,
}
Expand description

Pixel formats used by Cogl. For the formats with a byte per component, the order of the components specify the order in increasing memory addresses. So for example PixelFormat::Rgb888 would have the red component in the lowest address, green in the next address and blue after that regardless of the endianness of the system.

For the formats with non byte aligned components the component order specifies the order within a 16-bit or 32-bit number from most significant bit to least significant. So for PixelFormat::Rgb565, the red component would be in bits 11-15, the green component would be in 6-11 and the blue component would be in 1-5. Therefore the order in memory depends on the endianness of the system.

When uploading a texture PixelFormat::Any can be used as the internal format. Cogl will try to pick the best format to use internally and convert the texture data if necessary.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

Any

Any format

§

A8

8 bits alpha mask

§

Rgb565

RGB, 16 bits

§

Rgba4444

RGBA, 16 bits

§

Rgba5551

RGBA, 16 bits

§

Yuv

Not currently supported

§

G8

Single luminance component

§

Rg88

RG, 16 bits. Note that red-green textures are only available if FeatureID::OglFeatureIdTextureRg is advertised. See Texture::set_components for details.

§

Rgb888

RGB, 24 bits

§

Bgr888

BGR, 24 bits

§

Rgba8888

RGBA, 32 bits

§

Bgra8888

BGRA, 32 bits

§

Argb8888

ARGB, 32 bits

§

Abgr8888

ABGR, 32 bits

§

Rgba1010102

RGBA, 32 bits, 10 bpc

§

Bgra1010102

BGRA, 32 bits, 10 bpc

§

Argb2101010

ARGB, 32 bits, 10 bpc

§

Abgr2101010

ABGR, 32 bits, 10 bpc

§

Rgba8888Pre

Premultiplied RGBA, 32 bits

§

Bgra8888Pre

Premultiplied BGRA, 32 bits

§

Argb8888Pre

Premultiplied ARGB, 32 bits

§

Abgr8888Pre

Premultiplied ABGR, 32 bits

§

Rgba4444Pre

Premultiplied RGBA, 16 bits

§

Rgba5551Pre

Premultiplied RGBA, 16 bits

§

Rgba1010102Pre

Premultiplied RGBA, 32 bits, 10 bpc

§

Bgra1010102Pre

Premultiplied BGRA, 32 bits, 10 bpc

§

Argb2101010Pre

Premultiplied ARGB, 32 bits, 10 bpc

§

Abgr2101010Pre

Premultiplied ABGR, 32 bits, 10 bpc

§

Depth16

§

Depth32

§

Depth24Stencil8

Trait Implementations§

Source§

impl Clone for PixelFormat

Source§

fn clone(&self) -> PixelFormat

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for PixelFormat

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Display for PixelFormat

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl<'a> FromValue<'a> for PixelFormat

Source§

unsafe fn from_value(value: &Value) -> Self

Safety Read more
Source§

impl<'a> FromValueOptional<'a> for PixelFormat

Source§

unsafe fn from_value_optional(value: &Value) -> Option<Self>

Safety Read more
Source§

impl Hash for PixelFormat

Source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
Source§

impl Ord for PixelFormat

Source§

fn cmp(&self, other: &PixelFormat) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · Source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · Source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · Source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more
Source§

impl PartialEq for PixelFormat

Source§

fn eq(&self, other: &PixelFormat) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl PartialOrd for PixelFormat

Source§

fn partial_cmp(&self, other: &PixelFormat) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
Source§

impl SetValue for PixelFormat

Source§

unsafe fn set_value(value: &mut Value, this: &Self)

Safety Read more
Source§

impl StaticType for PixelFormat

Source§

fn static_type() -> Type

Returns the type identifier of Self.
Source§

impl Copy for PixelFormat

Source§

impl Eq for PixelFormat

Source§

impl StructuralPartialEq for PixelFormat

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToSendValue for T
where T: SetValue + Send + ToValue + ?Sized,

Source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
Source§

impl<T> ToValue for T
where T: SetValue + ?Sized,

Source§

fn to_value(&self) -> Value

Returns a Value clone of self.
Source§

fn to_value_type(&self) -> Type

Returns the type identifer of self. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.