Struct StaticVarCompensator 

pub struct StaticVarCompensator {
    pub base: RegulatingCondEq,
    pub capacitive_rating: Option<f64>,
    pub inductive_rating: Option<f64>,
    pub q: Option<f64>,
    pub s_vc_control_mode: Option<MridRef>,
    pub slope: Option<f64>,
    pub voltage_set_point: Option<f64>,
}

A facility for providing variable and controllable shunt reactive power. The SVC typically consists of a stepdown transformer, filter, thyristor-controlled reactor, and thyristor-switched capacitor arms. The SVC may operate in fixed MVar output mode or in voltage control mode. When in voltage control mode, the output of the SVC will be proportional to the deviation of voltage at the controlled bus from the voltage setpoint. The SVC characteristic slope defines the proportion. If the voltage at the controlled bus is equal to the voltage setpoint, the SVC MVar output is zero.

Fields

base: RegulatingCondEq

capacitive_rating: Option<f64>

Capacitive reactance at maximum capacitive reactive power. Shall always be positive.

inductive_rating: Option<f64>

Inductive reactance at maximum inductive reactive power. Shall always be negative.

q: Option<f64>

Reactive power injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for a steady state solution.

s_vc_control_mode: Option<MridRef>

SVC control mode.

slope: Option<f64>

The characteristics slope of an SVC defines how the reactive power output changes in proportion to the difference between the regulated bus voltage and the voltage setpoint. The attribute shall be a positive value or zero.

voltage_set_point: Option<f64>

The reactive power output of the SVC is proportional to the difference between the voltage at the regulated bus and the voltage setpoint. When the regulated bus voltage is equal to the voltage setpoint, the reactive power output is zero.

Implementations

impl StaticVarCompensator

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for StaticVarCompensator

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for StaticVarCompensator

fn clone(&self) -> StaticVarCompensator

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for StaticVarCompensator

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for StaticVarCompensator

fn default() -> StaticVarCompensator

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for StaticVarCompensator

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for StaticVarCompensator

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.