Struct ExternalNetworkInjection 

pub struct ExternalNetworkInjection {

    pub base: RegulatingCondEq,
    pub governor_scd: Option<f64>,
    pub ik_second: Option<bool>,
    pub max_initial_sym_sh_c_current: Option<f64>,
    pub max_p: Option<f64>,
    pub max_q: Option<f64>,
    pub max_r0to_x0ratio: Option<f64>,
    pub max_r1to_x1ratio: Option<f64>,
    pub max_z0to_z1ratio: Option<f64>,
    pub min_initial_sym_sh_c_current: Option<f64>,
    pub min_p: Option<f64>,
    pub min_q: Option<f64>,
    pub min_r0to_x0ratio: Option<f64>,
    pub min_r1to_x1ratio: Option<f64>,
    pub min_z0to_z1ratio: Option<f64>,
    pub p: Option<f64>,
    pub q: Option<f64>,
    pub reference_priority: Option<i64>,
    pub voltage_factor: Option<f64>,
}

This class represents the external network and it is used for IEC 60909 calculations.

Fields

base: RegulatingCondEq

governor_scd: Option<f64>

Power Frequency Bias. This is the change in power injection divided by the change in frequency and negated. A positive value of the power frequency bias provides additional power injection upon a drop in frequency.

ik_second: Option<bool>

Indicates whether initial symmetrical short-circuit current and power have been calculated according to IEC (Ik’). Used only if short circuit calculations are done according to superposition method.

max_initial_sym_sh_c_current: Option<f64>

Maximum initial symmetrical short-circuit currents (Ik’ max) in A (Ik’ = Sk’/(SQRT(3) Un)). Used for short circuit data exchange according to IEC 60909.

max_p: Option<f64>

Maximum active power of the injection.

max_q: Option<f64>

Maximum reactive power limit. It is used for modelling of infeed for load flow exchange and not for short circuit modelling.

max_r0to_x0ratio: Option<f64>

Maximum ratio of zero sequence resistance of Network Feeder to its zero sequence reactance (R(0)/X(0) max). Used for short circuit data exchange according to IEC 60909.

max_r1to_x1ratio: Option<f64>

Maximum ratio of positive sequence resistance of Network Feeder to its positive sequence reactance (R(1)/X(1) max). Used for short circuit data exchange according to IEC 60909.

max_z0to_z1ratio: Option<f64>

Maximum ratio of zero sequence impedance to its positive sequence impedance (Z(0)/Z(1) max). Used for short circuit data exchange according to IEC 60909.

min_initial_sym_sh_c_current: Option<f64>

Minimum initial symmetrical short-circuit currents (Ik’ min) in A (Ik’ = Sk’/(SQRT(3) Un)). Used for short circuit data exchange according to IEC 60909.

min_p: Option<f64>

Minimum active power of the injection.

min_q: Option<f64>

Minimum reactive power limit. It is used for modelling of infeed for load flow exchange and not for short circuit modelling.

min_r0to_x0ratio: Option<f64>

Indicates whether initial symmetrical short-circuit current and power have been calculated according to IEC (Ik’). Used for short circuit data exchange according to IEC 6090.

min_r1to_x1ratio: Option<f64>

Minimum ratio of positive sequence resistance of Network Feeder to its positive sequence reactance (R(1)/X(1) min). Used for short circuit data exchange according to IEC 60909.

min_z0to_z1ratio: Option<f64>

Minimum ratio of zero sequence impedance to its positive sequence impedance (Z(0)/Z(1) min). Used for short circuit data exchange according to IEC 60909.

p: Option<f64>

Active power injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for steady state solutions.

q: Option<f64>

Reactive power injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for steady state solutions.

reference_priority: Option<i64>

Priority of unit for use as powerflow voltage phase angle reference bus selection. 0 = don t care (default) 1 = highest priority. 2 is less than 1 and so on.

voltage_factor: Option<f64>

Voltage factor in pu, which was used to calculate short-circuit current Ik’ and power Sk’. Used only if short circuit calculations are done according to superposition method.

Implementations

impl ExternalNetworkInjection

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for ExternalNetworkInjection

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for ExternalNetworkInjection

fn clone(&self) -> ExternalNetworkInjection

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ExternalNetworkInjection

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ExternalNetworkInjection

fn default() -> ExternalNetworkInjection

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for ExternalNetworkInjection

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for ExternalNetworkInjection

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.