Struct ExcSK 

pub struct ExcSK {

    pub base: ExcitationSystemDynamics,
    pub efdmax: Option<f64>,
    pub efdmin: Option<f64>,
    pub emax: Option<f64>,
    pub emin: Option<f64>,
    pub k: Option<f64>,
    pub k1: Option<f64>,
    pub k2: Option<f64>,
    pub kc: Option<f64>,
    pub kce: Option<f64>,
    pub kd: Option<f64>,
    pub kgob: Option<f64>,
    pub kp: Option<f64>,
    pub kqi: Option<f64>,
    pub kqob: Option<f64>,
    pub kqp: Option<f64>,
    pub nq: Option<f64>,
    pub qconoff: Option<bool>,
    pub qz: Option<f64>,
    pub remote: Option<bool>,
    pub sbase: Option<f64>,
    pub tc: Option<f64>,
    pub te: Option<f64>,
    pub ti: Option<f64>,
    pub tp: Option<f64>,
    pub tr: Option<f64>,
    pub uimax: Option<f64>,
    pub uimin: Option<f64>,
    pub urmax: Option<f64>,
    pub urmin: Option<f64>,
    pub vtmax: Option<f64>,
    pub vtmin: Option<f64>,
    pub yp: Option<f64>,
}

Slovakian excitation system. UEL and secondary voltage control are included in this model. When this model is used, there cannot be a separate underexcitation limiter or VAr controller model.

Fields

base: ExcitationSystemDynamics

efdmax: Option<f64>

Field voltage clipping upper level limit (Efdmax) (> ExcSK.efdmin).

efdmin: Option<f64>

Field voltage clipping lower level limit (Efdmin) (< ExcSK.efdmax).

emax: Option<f64>

Maximum field voltage output (Emax) (> ExcSK.emin). Typical value = 20.

emin: Option<f64>

Minimum field voltage output (Emin) (< ExcSK.emax). Typical value = -20.

k: Option<f64>

Gain (K). Typical value = 1.

k1: Option<f64>

Parameter of underexcitation limit (K1). Typical value = 0,1364.

k2: Option<f64>

Parameter of underexcitation limit (K2). Typical value = -0,3861.

kc: Option<f64>

PI controller gain (Kc). Typical value = 70.

kce: Option<f64>

Rectifier regulation factor (Kce). Typical value = 0.

kd: Option<f64>

Exciter internal reactance (Kd). Typical value = 0.

kgob: Option<f64>

P controller gain (Kgob). Typical value = 10.

kp: Option<f64>

PI controller gain (Kp). Typical value = 1.

kqi: Option<f64>

PI controller gain of integral component (Kqi). Typical value = 0.

kqob: Option<f64>

Rate of rise of the reactive power (Kqob).

kqp: Option<f64>

PI controller gain (Kqp). Typical value = 0.

nq: Option<f64>

Deadband of reactive power (nq). Determines the range of sensitivity. Typical value = 0,001.

qconoff: Option<bool>

Secondary voltage control state (Qc_on_off). true = secondary voltage control is on false = secondary voltage control is off. Typical value = false.

qz: Option<f64>

Desired value (setpoint) of reactive power, manual setting (Qz).

remote: Option<bool>

Selector to apply automatic calculation in secondary controller model (remote). true = automatic calculation is activated false = manual set is active; the use of desired value of reactive power (Qz) is required. Typical value = true.

sbase: Option<f64>

Apparent power of the unit (Sbase) (> 0). Unit = MVA. Typical value = 259.

tc: Option<f64>

PI controller phase lead time constant (Tc) (>= 0). Typical value = 8.

te: Option<f64>

Time constant of gain block (Te) (>= 0). Typical value = 0,1.

ti: Option<f64>

PI controller phase lead time constant (Ti) (>= 0). Typical value = 2.

tp: Option<f64>

Time constant (Tp) (>= 0). Typical value = 0,1.

tr: Option<f64>

Voltage transducer time constant (Tr) (>= 0). Typical value = 0,01.

uimax: Option<f64>

Maximum error (UImax) (> ExcSK.uimin). Typical value = 10.

uimin: Option<f64>

Minimum error (UImin) (< ExcSK.uimax). Typical value = -10.

urmax: Option<f64>

Maximum controller output (URmax) (> ExcSK.urmin). Typical value = 10.

urmin: Option<f64>

Minimum controller output (URmin) (< ExcSK.urmax). Typical value = -10.

vtmax: Option<f64>

Maximum terminal voltage input (Vtmax) (> ExcSK.vtmin). Determines the range of voltage deadband. Typical value = 1,05.

vtmin: Option<f64>

Minimum terminal voltage input (Vtmin) (< ExcSK.vtmax). Determines the range of voltage deadband. Typical value = 0,95.

yp: Option<f64>

Maximum output (Yp). Typical value = 1.

Implementations

impl ExcSK

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for ExcSK

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for ExcSK

fn clone(&self) -> ExcSK

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ExcSK

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ExcSK

fn default() -> ExcSK

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for ExcSK

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for ExcSK

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.