Struct ExcELIN2 

pub struct ExcELIN2 {

    pub base: ExcitationSystemDynamics,
    pub efdbas: Option<f64>,
    pub iefmax: Option<f64>,
    pub iefmax2: Option<f64>,
    pub iefmin: Option<f64>,
    pub k1: Option<f64>,
    pub k1ec: Option<f64>,
    pub k2: Option<f64>,
    pub k3: Option<f64>,
    pub k4: Option<f64>,
    pub kd1: Option<f64>,
    pub ke2: Option<f64>,
    pub ketb: Option<f64>,
    pub pid1max: Option<f64>,
    pub seve1: Option<f64>,
    pub seve2: Option<f64>,
    pub tb1: Option<f64>,
    pub te: Option<f64>,
    pub te2: Option<f64>,
    pub ti1: Option<f64>,
    pub ti3: Option<f64>,
    pub ti4: Option<f64>,
    pub tr4: Option<f64>,
    pub upmax: Option<f64>,
    pub upmin: Option<f64>,
    pub ve1: Option<f64>,
    pub ve2: Option<f64>,
    pub xp: Option<f64>,
}

Detailed excitation system ELIN (VATECH). This model represents an all-static excitation system. A PI voltage controller establishes a desired field current set point for a proportional current controller. The integrator of the PI controller has a follow-up input to match its signal to the present field current. Power system stabilizer models used in conjunction with this excitation system model: PssELIN2, PssIEEE2B, Pss2B.

Fields

base: ExcitationSystemDynamics

efdbas: Option<f64>

Gain (Efdbas). Typical value = 0,1.

iefmax: Option<f64>

Limiter (Iefmax) (> ExcELIN2.iefmin). Typical value = 1.

iefmax2: Option<f64>

Minimum open circuit excitation voltage (Iefmax2). Typical value = -5.

iefmin: Option<f64>

Limiter (Iefmin) (< ExcELIN2.iefmax). Typical value = 1.

k1: Option<f64>

Voltage regulator input gain (K1). Typical value = 0.

k1ec: Option<f64>

Voltage regulator input limit (K1ec). Typical value = 2.

k2: Option<f64>

Gain (K2). Typical value = 5.

k3: Option<f64>

Gain (K3). Typical value = 0,1.

k4: Option<f64>

Gain (K4). Typical value = 0.

kd1: Option<f64>

Voltage controller derivative gain (Kd1). Typical value = 34,5.

ke2: Option<f64>

Gain (Ke2). Typical value = 0,1.

ketb: Option<f64>

Gain (Ketb). Typical value = 0,06.

pid1max: Option<f64>

Controller follow up gain (PID1max). Typical value = 2.

seve1: Option<f64>

Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (Se[Ve1]) (>= 0). Typical value = 0.

seve2: Option<f64>

Exciter saturation function value at the corresponding exciter voltage, Ve2, back of commutating reactance (Se[Ve2]) (>= 0). Typical value = 1.

tb1: Option<f64>

Voltage controller derivative washout time constant (Tb1) (>= 0). Typical value = 12,45.

te: Option<f64>

Time constant (Te) (>= 0). Typical value = 0.

te2: Option<f64>

Time Constant (Te2) (>= 0). Typical value = 1.

ti1: Option<f64>

Controller follow up deadband (Ti1). Typical value = 0.

ti3: Option<f64>

Time constant (Ti3) (>= 0). Typical value = 3.

ti4: Option<f64>

Time constant (Ti4) (>= 0). Typical value = 0.

tr4: Option<f64>

Time constant (Tr4) (>= 0). Typical value = 1.

upmax: Option<f64>

Limiter (Upmax) (> ExcELIN2.upmin). Typical value = 3.

upmin: Option<f64>

Limiter (Upmin) (< ExcELIN2.upmax). Typical value = 0.

ve1: Option<f64>

Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 3.

ve2: Option<f64>

Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 0.

xp: Option<f64>

Excitation transformer effective reactance (Xp). Typical value = 1.

Implementations

impl ExcELIN2

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for ExcELIN2

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for ExcELIN2

fn clone(&self) -> ExcELIN2

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ExcELIN2

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ExcELIN2

fn default() -> ExcELIN2

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for ExcELIN2

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for ExcELIN2

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.