Struct GovHydroDD 

pub struct GovHydroDD {

    pub base: TurbineGovernorDynamics,
    pub aturb: Option<f64>,
    pub bturb: Option<f64>,
    pub db1: Option<f64>,
    pub db2: Option<f64>,
    pub eps: Option<f64>,
    pub gmax: Option<f64>,
    pub gmin: Option<f64>,
    pub gv1: Option<f64>,
    pub gv2: Option<f64>,
    pub gv3: Option<f64>,
    pub gv4: Option<f64>,
    pub gv5: Option<f64>,
    pub gv6: Option<f64>,
    pub input_signal: Option<bool>,
    pub k1: Option<f64>,
    pub k2: Option<f64>,
    pub kg: Option<f64>,
    pub ki: Option<f64>,
    pub mwbase: Option<f64>,
    pub pgv1: Option<f64>,
    pub pgv2: Option<f64>,
    pub pgv3: Option<f64>,
    pub pgv4: Option<f64>,
    pub pgv5: Option<f64>,
    pub pgv6: Option<f64>,
    pub pmax: Option<f64>,
    pub pmin: Option<f64>,
    pub r: Option<f64>,
    pub td: Option<f64>,
    pub tf: Option<f64>,
    pub tp: Option<f64>,
    pub tt: Option<f64>,
    pub tturb: Option<f64>,
    pub velcl: Option<f64>,
    pub velop: Option<f64>,
}

Double derivative hydro governor and turbine.

Fields

base: TurbineGovernorDynamics

aturb: Option<f64>

Turbine numerator multiplier (Aturb) (see parameter detail 3). Typical value = -1.

bturb: Option<f64>

Turbine denominator multiplier (Bturb) (see parameter detail 3). Typical value = 0,5.

db1: Option<f64>

Intentional dead-band width (db1). Unit = Hz. Typical value = 0.

db2: Option<f64>

Unintentional dead-band (db2). Unit = MW. Typical value = 0.

eps: Option<f64>

Intentional db hysteresis (eps). Unit = Hz. Typical value = 0.

gmax: Option<f64>

Maximum gate opening (Gmax) (> GovHydroDD.gmin). Typical value = 0.

gmin: Option<f64>

Minimum gate opening (Gmin) (< GovHydroDD.gmax). Typical value = 0.

gv1: Option<f64>

Nonlinear gain point 1, PU gv (Gv1). Typical value = 0.

gv2: Option<f64>

Nonlinear gain point 2, PU gv (Gv2). Typical value = 0.

gv3: Option<f64>

Nonlinear gain point 3, PU gv (Gv3). Typical value = 0.

gv4: Option<f64>

Nonlinear gain point 4, PU gv (Gv4). Typical value = 0.

gv5: Option<f64>

Nonlinear gain point 5, PU gv (Gv5). Typical value = 0.

gv6: Option<f64>

Nonlinear gain point 6, PU gv (Gv6). Typical value = 0.

input_signal: Option<bool>

Input signal switch (Flag). true = Pe input is used false = feedback is received from CV. Flag is normally dependent on Tt. If Tt is zero, Flag is set to false. If Tt is not zero, Flag is set to true. Typical value = true.

k1: Option<f64>

Single derivative gain (K1). Typical value = 3,6.

k2: Option<f64>

Double derivative gain (K2). Typical value = 0,2.

kg: Option<f64>

Gate servo gain (Kg). Typical value = 3.

ki: Option<f64>

Integral gain (Ki). Typical value = 1.

mwbase: Option<f64>

Base for power values (MWbase) (>0). Unit = MW.

pgv1: Option<f64>

Nonlinear gain point 1, PU power (Pgv1). Typical value = 0.

pgv2: Option<f64>

Nonlinear gain point 2, PU power (Pgv2). Typical value = 0.

pgv3: Option<f64>

Nonlinear gain point 3, PU power (Pgv3). Typical value = 0.

pgv4: Option<f64>

Nonlinear gain point 4, PU power (Pgv4). Typical value = 0.

pgv5: Option<f64>

Nonlinear gain point 5, PU power (Pgv5). Typical value = 0.

pgv6: Option<f64>

Nonlinear gain point 6, PU power (Pgv6). Typical value = 0.

pmax: Option<f64>

Maximum gate opening, PU of MWbase (Pmax) (> GovHydroDD.pmin). Typical value = 1.

pmin: Option<f64>

Minimum gate opening, PU of MWbase (Pmin) (> GovHydroDD.pmax). Typical value = 0.

r: Option<f64>

Steady state droop (R). Typical value = 0,05.

td: Option<f64>

Input filter time constant (Td) (>= 0). If = 0, block is bypassed. Typical value = 0.

tf: Option<f64>

Washout time constant (Tf) (>= 0). Typical value = 0,1.

tp: Option<f64>

Gate servo time constant (Tp) (>= 0). If = 0, block is bypassed. Typical value = 0,35.

tt: Option<f64>

Power feedback time constant (Tt) (>= 0). If = 0, block is bypassed. Typical value = 0,02.

tturb: Option<f64>

Turbine time constant (Tturb) (>= 0). See parameter detail 3. Typical value = 0,8.

velcl: Option<f64>

Maximum gate closing velocity (Velcl). Unit = PU / s. Typical value = -0,14.

velop: Option<f64>

Maximum gate opening velocity (Velop). Unit = PU / s. Typical value = 0,09.

Implementations

impl GovHydroDD

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for GovHydroDD

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for GovHydroDD

fn clone(&self) -> GovHydroDD

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for GovHydroDD

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for GovHydroDD

fn default() -> GovHydroDD

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for GovHydroDD

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for GovHydroDD

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.