Struct EquivalentBranch 

pub struct EquivalentBranch {

    pub base: EquivalentEquipment,
    pub negative_r12: Option<f64>,
    pub negative_r21: Option<f64>,
    pub negative_x12: Option<f64>,
    pub negative_x21: Option<f64>,
    pub positive_r12: Option<f64>,
    pub positive_r21: Option<f64>,
    pub positive_x12: Option<f64>,
    pub positive_x21: Option<f64>,
    pub r: Option<f64>,
    pub r21: Option<f64>,
    pub x: Option<f64>,
    pub x21: Option<f64>,
    pub zero_r12: Option<f64>,
    pub zero_r21: Option<f64>,
    pub zero_x12: Option<f64>,
    pub zero_x21: Option<f64>,
}

The class represents equivalent branches. In cases where a transformer phase shift is modelled and the EquivalentBranch is spanning the same nodes, the impedance quantities for the EquivalentBranch shall consider the needed phase shift.

Fields

base: EquivalentEquipment

negative_r12: Option<f64>

Negative sequence series resistance from terminal sequence 1 to terminal sequence 2. Used for short circuit data exchange according to IEC 60909. EquivalentBranch is a result of network reduction prior to the data exchange.

negative_r21: Option<f64>

Negative sequence series resistance from terminal sequence 2 to terminal sequence 1. Used for short circuit data exchange according to IEC 60909. EquivalentBranch is a result of network reduction prior to the data exchange.

negative_x12: Option<f64>

Negative sequence series reactance from terminal sequence 1 to terminal sequence 2. Used for short circuit data exchange according to IEC 60909. Usage : EquivalentBranch is a result of network reduction prior to the data exchange.

negative_x21: Option<f64>

Negative sequence series reactance from terminal sequence 2 to terminal sequence 1. Used for short circuit data exchange according to IEC 60909. Usage: EquivalentBranch is a result of network reduction prior to the data exchange.

positive_r12: Option<f64>

Positive sequence series resistance from terminal sequence 1 to terminal sequence 2 . Used for short circuit data exchange according to IEC 60909. EquivalentBranch is a result of network reduction prior to the data exchange.

positive_r21: Option<f64>

Positive sequence series resistance from terminal sequence 2 to terminal sequence 1. Used for short circuit data exchange according to IEC 60909. EquivalentBranch is a result of network reduction prior to the data exchange.

positive_x12: Option<f64>

Positive sequence series reactance from terminal sequence 1 to terminal sequence 2. Used for short circuit data exchange according to IEC 60909. Usage : EquivalentBranch is a result of network reduction prior to the data exchange.

positive_x21: Option<f64>

Positive sequence series reactance from terminal sequence 2 to terminal sequence 1. Used for short circuit data exchange according to IEC 60909. Usage : EquivalentBranch is a result of network reduction prior to the data exchange.

r: Option<f64>

Positive sequence series resistance of the reduced branch.

r21: Option<f64>

Resistance from terminal sequence 2 to terminal sequence 1 .Used for steady state power flow. This attribute is optional and represent unbalanced network such as off-nominal phase shifter. If only EquivalentBranch.r is given, then EquivalentBranch.r21 is assumed equal to EquivalentBranch.r. Usage rule : EquivalentBranch is a result of network reduction prior to the data exchange.

x: Option<f64>

Positive sequence series reactance of the reduced branch.

x21: Option<f64>

Reactance from terminal sequence 2 to terminal sequence 1. Used for steady state power flow. This attribute is optional and represents an unbalanced network such as off-nominal phase shifter. If only EquivalentBranch.x is given, then EquivalentBranch.x21 is assumed equal to EquivalentBranch.x. Usage rule: EquivalentBranch is a result of network reduction prior to the data exchange.

zero_r12: Option<f64>

Zero sequence series resistance from terminal sequence 1 to terminal sequence 2. Used for short circuit data exchange according to IEC 60909. EquivalentBranch is a result of network reduction prior to the data exchange.

zero_r21: Option<f64>

Zero sequence series resistance from terminal sequence 2 to terminal sequence 1. Used for short circuit data exchange according to IEC 60909. Usage : EquivalentBranch is a result of network reduction prior to the data exchange.

zero_x12: Option<f64>

Zero sequence series reactance from terminal sequence 1 to terminal sequence 2. Used for short circuit data exchange according to IEC 60909. Usage : EquivalentBranch is a result of network reduction prior to the data exchange.

zero_x21: Option<f64>

Zero sequence series reactance from terminal sequence 2 to terminal sequence 1. Used for short circuit data exchange according to IEC 60909. Usage : EquivalentBranch is a result of network reduction prior to the data exchange.

Implementations

impl EquivalentBranch

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for EquivalentBranch

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for EquivalentBranch

fn clone(&self) -> EquivalentBranch

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for EquivalentBranch

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for EquivalentBranch

fn default() -> EquivalentBranch

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for EquivalentBranch

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for EquivalentBranch

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.