Struct ACDCConverter 

pub struct ACDCConverter {

    pub base: ConductingEquipment,
    pub pcc_terminal: Option<MridRef>,
    pub base_s: Option<f64>,
    pub idc: Option<f64>,
    pub idle_loss: Option<f64>,
    pub max_p: Option<f64>,
    pub max_udc: Option<f64>,
    pub min_p: Option<f64>,
    pub min_udc: Option<f64>,
    pub number_of_valves: Option<i64>,
    pub p: Option<f64>,
    pub pole_loss_p: Option<f64>,
    pub q: Option<f64>,
    pub rated_udc: Option<f64>,
    pub resistive_loss: Option<f64>,
    pub switching_loss: Option<f64>,
    pub target_ppcc: Option<f64>,
    pub target_udc: Option<f64>,
    pub uc: Option<f64>,
    pub udc: Option<f64>,
    pub valve_u0: Option<f64>,
}

A unit with valves for three phases, together with unit control equipment, essential protective and switching devices, DC storage capacitors, phase reactors and auxiliaries, if any, used for conversion.

Fields

base: ConductingEquipment

pcc_terminal: Option<MridRef>

Point of common coupling terminal for this converter DC side. It is typically the terminal on the power transformer (or switch) closest to the AC network.

base_s: Option<f64>

Base apparent power of the converter pole. The attribute shall be a positive value.

idc: Option<f64>

Converter DC current, also called Id. It is converter’s state variable, result from power flow.

idle_loss: Option<f64>

Active power loss in pole at no power transfer. It is converter’s configuration data used in power flow. The attribute shall be a positive value.

max_p: Option<f64>

Maximum active power limit. The value is overwritten by values of VsCapabilityCurve, if present.

max_udc: Option<f64>

The maximum voltage on the DC side at which the converter should operate. It is converter’s configuration data used in power flow. The attribute shall be a positive value.

min_p: Option<f64>

Minimum active power limit. The value is overwritten by values of VsCapabilityCurve, if present.

min_udc: Option<f64>

The minimum voltage on the DC side at which the converter should operate. It is converter’s configuration data used in power flow. The attribute shall be a positive value.

number_of_valves: Option<i64>

Number of valves in the converter. Used in loss calculations.

p: Option<f64>

Active power at the point of common coupling. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for a steady state solution in the case a simplified power flow model is used.

pole_loss_p: Option<f64>

The active power loss at a DC Pole = idleLoss + switchingLoss*|Idc| + resitiveLoss*Idc^2. For lossless operation Pdc=Pac. For rectifier operation with losses Pdc=Pac-lossP. For inverter operation with losses Pdc=Pac+lossP. It is converter’s state variable used in power flow. The attribute shall be a positive value.

q: Option<f64>

Reactive power at the point of common coupling. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for a steady state solution in the case a simplified power flow model is used.

rated_udc: Option<f64>

Rated converter DC voltage, also called UdN. The attribute shall be a positive value. It is converter’s configuration data used in power flow. For instance a bipolar HVDC link with value 200 kV has a 400kV difference between the dc lines.

resistive_loss: Option<f64>

It is converter’s configuration data used in power flow. Refer to poleLossP. The attribute shall be a positive value.

switching_loss: Option<f64>

Switching losses, relative to the base apparent power ‘baseS’. Refer to poleLossP. The attribute shall be a positive value.

target_ppcc: Option<f64>

Real power injection target in AC grid, at point of common coupling. Load sign convention is used, i.e. positive sign means flow out from a node.

target_udc: Option<f64>

Target value for DC voltage magnitude. The attribute shall be a positive value.

uc: Option<f64>

Line-to-line converter voltage, the voltage at the AC side of the valve. It is converter’s state variable, result from power flow. The attribute shall be a positive value.

udc: Option<f64>

Converter voltage at the DC side, also called Ud. It is converter’s state variable, result from power flow. The attribute shall be a positive value.

valve_u0: Option<f64>

Valve threshold voltage, also called Uvalve. Forward voltage drop when the valve is conducting. Used in loss calculations, i.e. the switchLoss depend on numberOfValves * valveU0.

Implementations

impl ACDCConverter

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for ACDCConverter

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for ACDCConverter

fn clone(&self) -> ACDCConverter

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ACDCConverter

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ACDCConverter

fn default() -> ACDCConverter

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for ACDCConverter

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for ACDCConverter

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.