Struct GovSteamEU 

pub struct GovSteamEU {

    pub base: TurbineGovernorDynamics,
    pub chc: Option<f64>,
    pub cho: Option<f64>,
    pub cic: Option<f64>,
    pub cio: Option<f64>,
    pub db1: Option<f64>,
    pub db2: Option<f64>,
    pub hhpmax: Option<f64>,
    pub ke: Option<f64>,
    pub kfcor: Option<f64>,
    pub khp: Option<f64>,
    pub klp: Option<f64>,
    pub komegacor: Option<f64>,
    pub mwbase: Option<f64>,
    pub pmax: Option<f64>,
    pub prhmax: Option<f64>,
    pub simx: Option<f64>,
    pub tb: Option<f64>,
    pub tdp: Option<f64>,
    pub ten: Option<f64>,
    pub tf: Option<f64>,
    pub tfp: Option<f64>,
    pub thp: Option<f64>,
    pub tip: Option<f64>,
    pub tlp: Option<f64>,
    pub tp: Option<f64>,
    pub trh: Option<f64>,
    pub tvhp: Option<f64>,
    pub tvip: Option<f64>,
    pub tw: Option<f64>,
    pub wfmax: Option<f64>,
    pub wfmin: Option<f64>,
    pub wmax1: Option<f64>,
    pub wmax2: Option<f64>,
    pub wwmax: Option<f64>,
    pub wwmin: Option<f64>,
}

Simplified boiler and steam turbine with PID governor.

Fields

base: TurbineGovernorDynamics

chc: Option<f64>

Control valves rate closing limit (Chc). Unit = PU / s. Typical value = -3,3.

cho: Option<f64>

Control valves rate opening limit (Cho). Unit = PU / s. Typical value = 0,17.

cic: Option<f64>

Intercept valves rate closing limit (Cic). Typical value = -2,2.

cio: Option<f64>

Intercept valves rate opening limit (Cio). Typical value = 0,123.

db1: Option<f64>

Deadband of the frequency corrector (db1). Typical value = 0.

db2: Option<f64>

Deadband of the speed governor (db2). Typical value = 0,0004.

hhpmax: Option<f64>

Maximum control valve position (Hhpmax). Typical value = 1.

ke: Option<f64>

Gain of the power controller (Ke). Typical value = 0,65.

kfcor: Option<f64>

Gain of the frequency corrector (Kfcor). Typical value = 20.

khp: Option<f64>

Fraction of total turbine output generated by HP part (Khp). Typical value = 0,277.

klp: Option<f64>

Fraction of total turbine output generated by HP part (Klp). Typical value = 0,723.

komegacor: Option<f64>

Gain of the speed governor (Kwcor). Typical value = 20.

mwbase: Option<f64>

Base for power values (MWbase) (> 0). Unit = MW.

pmax: Option<f64>

Maximal active power of the turbine (Pmax). Typical value = 1.

prhmax: Option<f64>

Maximum low pressure limit (Prhmax). Typical value = 1,4.

simx: Option<f64>

Intercept valves transfer limit (Simx). Typical value = 0,425.

tb: Option<f64>

Boiler time constant (Tb) (>= 0). Typical value = 100.

tdp: Option<f64>

Derivative time constant of the power controller (Tdp) (>= 0). Typical value = 0.

ten: Option<f64>

Electro hydraulic transducer (Ten) (>= 0). Typical value = 0,1.

tf: Option<f64>

Frequency transducer time constant (Tf) (>= 0). Typical value = 0.

tfp: Option<f64>

Time constant of the power controller (Tfp) (>= 0). Typical value = 0.

thp: Option<f64>

High pressure (HP) time constant of the turbine (Thp) (>= 0). Typical value = 0,31.

tip: Option<f64>

Integral time constant of the power controller (Tip) (>= 0). Typical value = 2.

tlp: Option<f64>

Low pressure (LP) time constant of the turbine (Tlp) (>= 0). Typical value = 0,45.

tp: Option<f64>

Power transducer time constant (Tp) (>= 0). Typical value = 0,07.

trh: Option<f64>

Reheater time constant of the turbine (Trh) (>= 0). Typical value = 8.

tvhp: Option<f64>

Control valves servo time constant (Tvhp) (>= 0). Typical value = 0,1.

tvip: Option<f64>

Intercept valves servo time constant (Tvip) (>= 0). Typical value = 0,15.

tw: Option<f64>

Speed transducer time constant (Tw) (>= 0). Typical value = 0,02.

wfmax: Option<f64>

Upper limit for frequency correction (Wfmax) (> GovSteamEU.wfmin). Typical value = 0,05.

wfmin: Option<f64>

Lower limit for frequency correction (Wfmin) (< GovSteamEU.wfmax). Typical value = -0,05.

wmax1: Option<f64>

Emergency speed control lower limit (wmax1). Typical value = 1,025.

wmax2: Option<f64>

Emergency speed control upper limit (wmax2). Typical value = 1,05.

wwmax: Option<f64>

Upper limit for the speed governor (Wwmax) (> GovSteamEU.wwmin). Typical value = 0,1.

wwmin: Option<f64>

Lower limit for the speed governor frequency correction (Wwmin) (< GovSteamEU.wwmax). Typical value = -1.

Implementations

impl GovSteamEU

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for GovSteamEU

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for GovSteamEU

fn clone(&self) -> GovSteamEU

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for GovSteamEU

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for GovSteamEU

fn default() -> GovSteamEU

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for GovSteamEU

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for GovSteamEU

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.