Struct GovSteam1 

pub struct GovSteam1 {

    pub base: TurbineGovernorDynamics,
    pub db1: Option<f64>,
    pub db2: Option<f64>,
    pub eps: Option<f64>,
    pub gv1: Option<f64>,
    pub gv2: Option<f64>,
    pub gv3: Option<f64>,
    pub gv4: Option<f64>,
    pub gv5: Option<f64>,
    pub gv6: Option<f64>,
    pub k: Option<f64>,
    pub k1: Option<f64>,
    pub k2: Option<f64>,
    pub k3: Option<f64>,
    pub k4: Option<f64>,
    pub k5: Option<f64>,
    pub k6: Option<f64>,
    pub k7: Option<f64>,
    pub k8: Option<f64>,
    pub mwbase: Option<f64>,
    pub pgv1: Option<f64>,
    pub pgv2: Option<f64>,
    pub pgv3: Option<f64>,
    pub pgv4: Option<f64>,
    pub pgv5: Option<f64>,
    pub pgv6: Option<f64>,
    pub pmax: Option<f64>,
    pub pmin: Option<f64>,
    pub sdb1: Option<bool>,
    pub sdb2: Option<bool>,
    pub t1: Option<f64>,
    pub t2: Option<f64>,
    pub t3: Option<f64>,
    pub t4: Option<f64>,
    pub t5: Option<f64>,
    pub t6: Option<f64>,
    pub t7: Option<f64>,
    pub uc: Option<f64>,
    pub uo: Option<f64>,
    pub valve: Option<bool>,
}

Steam turbine governor, based on the GovSteamIEEE1 (with optional deadband and nonlinear valve gain added).

Fields

base: TurbineGovernorDynamics

db1: Option<f64>

Intentional deadband width (db1). Unit = Hz. Typical value = 0.

db2: Option<f64>

Unintentional deadband (db2). Unit = MW. Typical value = 0.

eps: Option<f64>

Intentional db hysteresis (eps). Unit = Hz. Typical value = 0.

gv1: Option<f64>

Nonlinear gain valve position point 1 (GV1). Typical value = 0.

gv2: Option<f64>

Nonlinear gain valve position point 2 (GV2). Typical value = 0,4.

gv3: Option<f64>

Nonlinear gain valve position point 3 (GV3). Typical value = 0,5.

gv4: Option<f64>

Nonlinear gain valve position point 4 (GV4). Typical value = 0,6.

gv5: Option<f64>

Nonlinear gain valve position point 5 (GV5). Typical value = 1.

gv6: Option<f64>

Nonlinear gain valve position point 6 (GV6). Typical value = 0.

k: Option<f64>

Governor gain (reciprocal of droop) (K) (> 0). Typical value = 25.

k1: Option<f64>

Fraction of HP shaft power after first boiler pass (K1). Typical value = 0,2.

k2: Option<f64>

Fraction of LP shaft power after first boiler pass (K2). Typical value = 0.

k3: Option<f64>

Fraction of HP shaft power after second boiler pass (K3). Typical value = 0,3.

k4: Option<f64>

Fraction of LP shaft power after second boiler pass (K4). Typical value = 0.

k5: Option<f64>

Fraction of HP shaft power after third boiler pass (K5). Typical value = 0,5.

k6: Option<f64>

Fraction of LP shaft power after third boiler pass (K6). Typical value = 0.

k7: Option<f64>

Fraction of HP shaft power after fourth boiler pass (K7). Typical value = 0.

k8: Option<f64>

Fraction of LP shaft power after fourth boiler pass (K8). Typical value = 0.

mwbase: Option<f64>

Base for power values (MWbase) (> 0). Unit = MW.

pgv1: Option<f64>

Nonlinear gain power value point 1 (Pgv1). Typical value = 0.

pgv2: Option<f64>

Nonlinear gain power value point 2 (Pgv2). Typical value = 0,75.

pgv3: Option<f64>

Nonlinear gain power value point 3 (Pgv3). Typical value = 0,91.

pgv4: Option<f64>

Nonlinear gain power value point 4 (Pgv4). Typical value = 0,98.

pgv5: Option<f64>

Nonlinear gain power value point 5 (Pgv5). Typical value = 1.

pgv6: Option<f64>

Nonlinear gain power value point 6 (Pgv6). Typical value = 0.

pmax: Option<f64>

Maximum valve opening (Pmax) (> GovSteam1.pmin). Typical value = 1.

pmin: Option<f64>

Minimum valve opening (Pmin) (>= 0 and < GovSteam1.pmax). Typical value = 0.

sdb1: Option<bool>

Intentional deadband indicator. true = intentional deadband is applied false = intentional deadband is not applied. Typical value = true.

sdb2: Option<bool>

Unintentional deadband location. true = intentional deadband is applied before point ‘A’ false = intentional deadband is applied after point ‘A’. Typical value = true.

t1: Option<f64>

Governor lag time constant (T1) (>= 0). Typical value = 0.

t2: Option<f64>

Governor lead time constant (T2) (>= 0). Typical value = 0.

t3: Option<f64>

Valve positioner time constant (T3) (> 0). Typical value = 0,1.

t4: Option<f64>

Inlet piping/steam bowl time constant (T4) (>= 0). Typical value = 0,3.

t5: Option<f64>

Time constant of second boiler pass (T5) (>= 0). Typical value = 5.

t6: Option<f64>

Time constant of third boiler pass (T6) (>= 0). Typical value = 0,5.

t7: Option<f64>

Time constant of fourth boiler pass (T7) (>= 0). Typical value = 0.

uc: Option<f64>

Maximum valve closing velocity (Uc) (< 0). Unit = PU / s. Typical value = -10.

uo: Option<f64>

Maximum valve opening velocity (Uo) (> 0). Unit = PU / s. Typical value = 1.

valve: Option<bool>

Nonlinear valve characteristic. true = nonlinear valve characteristic is used false = nonlinear valve characteristic is not used. Typical value = true.

Implementations

impl GovSteam1

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for GovSteam1

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for GovSteam1

fn clone(&self) -> GovSteam1

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for GovSteam1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for GovSteam1

fn default() -> GovSteam1

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for GovSteam1

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for GovSteam1

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.