Struct GovHydroFrancis 

pub struct GovHydroFrancis {

    pub base: TurbineGovernorDynamics,
    pub am: Option<f64>,
    pub av0: Option<f64>,
    pub av1: Option<f64>,
    pub bp: Option<f64>,
    pub db1: Option<f64>,
    pub etamax: Option<f64>,
    pub governor_control: Option<UriRef>,
    pub h1: Option<f64>,
    pub h2: Option<f64>,
    pub hn: Option<f64>,
    pub kc: Option<f64>,
    pub kg: Option<f64>,
    pub kt: Option<f64>,
    pub qc0: Option<f64>,
    pub qn: Option<f64>,
    pub ta: Option<f64>,
    pub td: Option<f64>,
    pub ts: Option<f64>,
    pub twnc: Option<f64>,
    pub twng: Option<f64>,
    pub tx: Option<f64>,
    pub va: Option<f64>,
    pub valvmax: Option<f64>,
    pub valvmin: Option<f64>,
    pub vc: Option<f64>,
    pub water_tunnel_surge_chamber_simulation: Option<bool>,
    pub zsfc: Option<f64>,
}

Detailed hydro unit - Francis model. This model can be used to represent three types of governors. A schematic of the hydraulic system of detailed hydro unit models, such as Francis and Pelton, is provided in the DetailedHydroModelHydraulicSystem diagram.

Fields

base: TurbineGovernorDynamics

am: Option<f64>

Opening section SEFF at the maximum efficiency (Am). Typical value = 0,7.

av0: Option<f64>

Area of the surge tank (AV0). Unit = m2. Typical value = 30.

av1: Option<f64>

Area of the compensation tank (AV1). Unit = m2. Typical value = 700.

bp: Option<f64>

Droop (Bp). Typical value = 0,05.

db1: Option<f64>

Intentional dead-band width (DB1). Unit = Hz. Typical value = 0.

etamax: Option<f64>

Maximum efficiency (EtaMax). Typical value = 1,05.

governor_control: Option<UriRef>

Governor control flag (Cflag). Typical value = mechanicHydrolicTachoAccelerator.

h1: Option<f64>

Head of compensation chamber water level with respect to the level of penstock (H1). Unit = km. Typical value = 0,004.

h2: Option<f64>

Head of surge tank water level with respect to the level of penstock (H2). Unit = km. Typical value = 0,040.

hn: Option<f64>

Rated hydraulic head (Hn). Unit = km. Typical value = 0,250.

kc: Option<f64>

Penstock loss coefficient (due to friction) (Kc). Typical value = 0,025.

kg: Option<f64>

Water tunnel and surge chamber loss coefficient (due to friction) (Kg). Typical value = 0,025.

kt: Option<f64>

Washout gain (Kt). Typical value = 0,25.

qc0: Option<f64>

No-load turbine flow at nominal head (Qc0). Typical value = 0,1.

qn: Option<f64>

Rated flow (Qn). Unit = m3/s. Typical value = 250.

ta: Option<f64>

Derivative gain (Ta) (>= 0). Typical value = 3.

td: Option<f64>

Washout time constant (Td) (>= 0). Typical value = 6.

ts: Option<f64>

Gate servo time constant (Ts) (>= 0). Typical value = 0,5.

twnc: Option<f64>

Water inertia time constant (Twnc) (>= 0). Typical value = 1.

twng: Option<f64>

Water tunnel and surge chamber inertia time constant (Twng) (>= 0). Typical value = 3.

tx: Option<f64>

Derivative feedback gain (Tx) (>= 0). Typical value = 1.

va: Option<f64>

Maximum gate opening velocity (Va). Unit = PU / s. Typical value = 0,06.

valvmax: Option<f64>

Maximum gate opening (ValvMax) (> GovHydroFrancis.valvmin). Typical value = 1,1.

valvmin: Option<f64>

Minimum gate opening (ValvMin) (< GovHydroFrancis.valvmax). Typical value = 0.

vc: Option<f64>

Maximum gate closing velocity (Vc). Unit = PU / s. Typical value = -0,06.

water_tunnel_surge_chamber_simulation: Option<bool>

Water tunnel and surge chamber simulation (Tflag). true = enable of water tunnel and surge chamber simulation false = inhibit of water tunnel and surge chamber simulation. Typical value = false.

zsfc: Option<f64>

Head of upper water level with respect to the level of penstock (Zsfc). Unit = km. Typical value = 0,025.

Implementations

impl GovHydroFrancis

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for GovHydroFrancis

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for GovHydroFrancis

fn clone(&self) -> GovHydroFrancis

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for GovHydroFrancis

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for GovHydroFrancis

fn default() -> GovHydroFrancis

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for GovHydroFrancis

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for GovHydroFrancis

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.