Struct ExcIEEEAC7B 

pub struct ExcIEEEAC7B {

    pub base: ExcitationSystemDynamics,
    pub kc: Option<f64>,
    pub kd: Option<f64>,
    pub kdr: Option<f64>,
    pub ke: Option<f64>,
    pub kf1: Option<f64>,
    pub kf2: Option<f64>,
    pub kf3: Option<f64>,
    pub kia: Option<f64>,
    pub kir: Option<f64>,
    pub kl: Option<f64>,
    pub kp: Option<f64>,
    pub kpa: Option<f64>,
    pub kpr: Option<f64>,
    pub seve1: Option<f64>,
    pub seve2: Option<f64>,
    pub tdr: Option<f64>,
    pub te: Option<f64>,
    pub tf: Option<f64>,
    pub vamax: Option<f64>,
    pub vamin: Option<f64>,
    pub ve1: Option<f64>,
    pub ve2: Option<f64>,
    pub vemin: Option<f64>,
    pub vfemax: Option<f64>,
    pub vrmax: Option<f64>,
    pub vrmin: Option<f64>,
}

IEEE 421.5-2005 type AC7B model. The model represents excitation systems which consist of an AC alternator with either stationary or rotating rectifiers to produce the DC field requirements. It is an upgrade to earlier AC excitation systems, which replace only the controls but retain the AC alternator and diode rectifier bridge. Reference: IEEE 421.5-2005, 6.7. Note, however, that in IEEE 421.5-2005, the [1 / sTE] block is shown as [1 / (1 + sTE)], which is incorrect.

Fields

base: ExcitationSystemDynamics

kc: Option<f64>

Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,18.

kd: Option<f64>

Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 0,02.

kdr: Option<f64>

Voltage regulator derivative gain (KDR) (>= 0). Typical value = 0.

ke: Option<f64>

Exciter constant related to self-excited field (KE). Typical value = 1.

kf1: Option<f64>

Excitation control system stabilizer gain (KF1) (>= 0). Typical value = 0,212.

kf2: Option<f64>

Excitation control system stabilizer gain (KF2) (>= 0). Typical value = 0.

kf3: Option<f64>

Excitation control system stabilizer gain (KF3) (>= 0). Typical value = 0.

kia: Option<f64>

Voltage regulator integral gain (KIA) (>= 0). Typical value = 59,69.

kir: Option<f64>

Voltage regulator integral gain (KIR) (>= 0). Typical value = 4,24.

kl: Option<f64>

Exciter field voltage lower limit parameter (KL). Typical value = 10.

kp: Option<f64>

Potential circuit gain coefficient (KP) (> 0). Typical value = 4,96.

kpa: Option<f64>

Voltage regulator proportional gain (KPA) (> 0 if ExcIEEEAC7B.kia = 0). Typical value = 65,36.

kpr: Option<f64>

Voltage regulator proportional gain (KPR) (> 0 if ExcIEEEAC7B.kir = 0). Typical value = 4,24.

seve1: Option<f64>

Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 0,44.

seve2: Option<f64>

Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 0,075.

tdr: Option<f64>

Lag time constant (TDR) (>= 0). Typical value = 0.

te: Option<f64>

Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 1,1.

tf: Option<f64>

Excitation control system stabilizer time constant (TF) (> 0). Typical value = 1.

vamax: Option<f64>

Maximum voltage regulator output (VAMAX) (> 0). Typical value = 1.

vamin: Option<f64>

Minimum voltage regulator output (VAMIN) (< 0). Typical value = -0,95.

ve1: Option<f64>

Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 6,3.

ve2: Option<f64>

Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 3,02.

vemin: Option<f64>

Minimum exciter voltage output (VEMIN) (<= 0). Typical value = 0.

vfemax: Option<f64>

Exciter field current limit reference (VFEMAX). Typical value = 6,9.

vrmax: Option<f64>

Maximum voltage regulator output (VRMAX) (> 0). Typical value = 5,79.

vrmin: Option<f64>

Minimum voltage regulator output (VRMIN) (< 0). Typical value = -5,79.

Implementations

impl ExcIEEEAC7B

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for ExcIEEEAC7B

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for ExcIEEEAC7B

fn clone(&self) -> ExcIEEEAC7B

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ExcIEEEAC7B

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ExcIEEEAC7B

fn default() -> ExcIEEEAC7B

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for ExcIEEEAC7B

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for ExcIEEEAC7B

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.