Struct ExcIEEEAC3A 

pub struct ExcIEEEAC3A {

    pub base: ExcitationSystemDynamics,
    pub efdn: Option<f64>,
    pub ka: Option<f64>,
    pub kc: Option<f64>,
    pub kd: Option<f64>,
    pub ke: Option<f64>,
    pub kf: Option<f64>,
    pub kn: Option<f64>,
    pub kr: Option<f64>,
    pub seve1: Option<f64>,
    pub seve2: Option<f64>,
    pub ta: Option<f64>,
    pub tb: Option<f64>,
    pub tc: Option<f64>,
    pub te: Option<f64>,
    pub tf: Option<f64>,
    pub vamax: Option<f64>,
    pub vamin: Option<f64>,
    pub ve1: Option<f64>,
    pub ve2: Option<f64>,
    pub vemin: Option<f64>,
    pub vfemax: Option<f64>,
}

IEEE 421.5-2005 type AC3A model. The model represents the field-controlled alternator-rectifier excitation systems designated type AC3A. These excitation systems include an alternator main exciter with non-controlled rectifiers. The exciter employs self-excitation, and the voltage regulator power is derived from the exciter output voltage. Therefore, this system has an additional nonlinearity, simulated by the use of a multiplier whose inputs are the voltage regulator command signal, Va, and the exciter output voltage, Efd, times KR. This model is applicable to excitation systems employing static voltage regulators. Reference: IEEE 421.5-2005, 6.3.

Fields

base: ExcitationSystemDynamics

efdn: Option<f64>

Value of Efd at which feedback gain changes (EFDN) (> 0). Typical value = 2,36.

ka: Option<f64>

Voltage regulator gain (KA) (> 0). Typical value = 45,62.

kc: Option<f64>

Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,104.

kd: Option<f64>

Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 0,499.

ke: Option<f64>

Exciter constant related to self-excited field (KE). Typical value = 1.

kf: Option<f64>

Excitation control system stabilizer gains (KF) (>= 0). Typical value = 0,143.

kn: Option<f64>

Excitation control system stabilizer gain (KN) (>= 0). Typical value = 0,05.

kr: Option<f64>

Constant associated with regulator and alternator field power supply (KR) (> 0). Typical value = 3,77.

seve1: Option<f64>

Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 1,143.

seve2: Option<f64>

Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 0,1.

ta: Option<f64>

Voltage regulator time constant (TA) (> 0). Typical value = 0,013.

tb: Option<f64>

Voltage regulator time constant (TB) (>= 0). Typical value = 0.

tc: Option<f64>

Voltage regulator time constant (TC) (>= 0). Typical value = 0.

te: Option<f64>

Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 1,17.

tf: Option<f64>

Excitation control system stabilizer time constant (TF) (> 0). Typical value = 1.

vamax: Option<f64>

Maximum voltage regulator output (VAMAX) (> 0). Typical value = 1.

vamin: Option<f64>

Minimum voltage regulator output (VAMIN) (< 0). Typical value = -0,95.

ve1: Option<f64>

Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 6,24.

ve2: Option<f64>

Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 4,68.

vemin: Option<f64>

Minimum exciter voltage output (VEMIN) (<= 0). Typical value = 0.

vfemax: Option<f64>

Exciter field current limit reference (VFEMAX) (>= 0). Typical value = 16.

Implementations

impl ExcIEEEAC3A

pub fn from_block(b: &RdfBlock) -> Self

Trait Implementations

impl CimElement for ExcIEEEAC3A

fn mrid(&self) -> &str

fn type_name(&self) -> &'static str

fn as_any(&self) -> &dyn Any

fn to_json_value(&self) -> Value

fn to_block(&self) -> RdfBlock

impl Clone for ExcIEEEAC3A

fn clone(&self) -> ExcIEEEAC3A

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ExcIEEEAC3A

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ExcIEEEAC3A

fn default() -> ExcIEEEAC3A

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for ExcIEEEAC3A

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Serialize for ExcIEEEAC3A

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.