Struct cc13x2_cc26x2_hal::ccfg::size_and_dis_flags::W

pub struct W { /* fields omitted */ }

Value to write to the register

Methods

impl W

pub fn reset_value() -> W

Reset value of the register

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register

pub fn size_of_ccfg(&mut self) -> _SIZE_OF_CCFGW

Bits 16:31 - 31:16] Total size of CCFG in bytes.

pub fn disable_flags(&mut self) -> _DISABLE_FLAGSW

Bits 4:15 - 15:4] Reserved for future use. Software should not rely on the value of a reserved. Writing any other value than the reset/default value may result in undefined behavior.

pub fn dis_tcxo(&mut self) -> _DIS_TCXOW

Bit 3 - 3:3] Disable TCXO. 0: TCXO functionality enabled. 1: TCXO functionality disabled. Note: An external TCXO is required if DIS_TCXO = 0.

pub fn dis_gpram(&mut self) -> _DIS_GPRAMW

Bit 2 - 2:2] Disable GPRAM (or use the 8K VIMS RAM as CACHE RAM). 0: GPRAM is enabled and hence CACHE disabled. 1: GPRAM is disabled and instead CACHE is enabled (default). Notes: - Disabling CACHE will reduce CPU execution speed (up to 60%). - GPRAM is 8 K-bytes in size and located at 0x11000000-0x11001FFF if enabled. See: VIMS:CTL.MODE

pub fn dis_alt_dcdc_setting(&mut self) -> _DIS_ALT_DCDC_SETTINGW

Bit 1 - 1:1] Disable alternate DC/DC settings. 0: Enable alternate DC/DC settings. 1: Disable alternate DC/DC settings. See: MODE_CONF_1.ALT_DCDC_VMIN MODE_CONF_1.ALT_DCDC_DITHER_EN MODE_CONF_1.ALT_DCDC_IPEAK NOTE! The DriverLib function SysCtrl_DCDC_VoltageConditionalControl() must be called regularly to apply this field (handled automatically if using TI RTOS!).

pub fn dis_xosc_ovr(&mut self) -> _DIS_XOSC_OVRW

Bit 0 - 0:0] Disable XOSC override functionality. 0: Enable XOSC override functionality. 1: Disable XOSC override functionality. See: MODE_CONF_1.DELTA_IBIAS_INIT MODE_CONF_1.DELTA_IBIAS_OFFSET MODE_CONF_1.XOSC_MAX_START