[−][src]Module cc13x2_cc26x2_hal::ccfg
Customer configuration area (CCFG)
Modules
bl_config | Bootloader Configuration Configures the functionality of the ROM boot loader. If both the boot loader is enabled by the BOOTLOADER_ENABLE field and the boot loader backdoor is enabled by the BL_ENABLE field it is possible to force entry of the ROM boot loader even if a valid image is present in flash. |
ccfg_prot_127_96 | Protect Sectors 96-127 Each bit write protects one flash sector from being both programmed and erased. Bit must be set to 0 in order to enable sector write protect. Not in use. |
ccfg_prot_31_0 | Protect Sectors 0-31 Each bit write protects one 8KB flash sector from being both programmed and erased. Bit must be set to 0 in order to enable sector write protect. |
ccfg_prot_63_32 | Protect Sectors 32-63 Each bit write protects one 8KB flash sector from being both programmed and erased. Bit must be set to 0 in order to enable sector write protect. |
ccfg_prot_95_64 | Protect Sectors 64-95 Each bit write protects one flash sector from being both programmed and erased. Bit must be set to 0 in order to enable sector write protect. Not in use. |
ccfg_tap_dap_0 | Test Access Points Enable 0 |
ccfg_tap_dap_1 | Test Access Points Enable 1 |
ccfg_ti_options | TI Options |
erase_conf | Erase Configuration |
ext_lf_clk | Extern LF clock configuration |
freq_offset | Frequency Offset |
ieee_ble_0 | IEEE BLE Address 0 |
ieee_ble_1 | IEEE BLE Address 1 |
ieee_mac_0 | IEEE MAC Address 0 |
ieee_mac_1 | IEEE MAC Address 1 |
image_valid_conf | Image Valid |
mode_conf | Mode Configuration 0 |
mode_conf_1 | Mode Configuration 1 |
reserved_0 | Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
rtc_offset | Real Time Clock Offset Enabled by MODE_CONF.RTC_COMP. |
size_and_dis_flags | CCFG Size and Disable Flags |
volt_load_0 | Voltage Load 0 Enabled by MODE_CONF.VDDR_EXT_LOAD. |
volt_load_1 | Voltage Load 1 Enabled by MODE_CONF.VDDR_EXT_LOAD. |
Structs
BL_CONFIG | Bootloader Configuration Configures the functionality of the ROM boot loader. If both the boot loader is enabled by the BOOTLOADER_ENABLE field and the boot loader backdoor is enabled by the BL_ENABLE field it is possible to force entry of the ROM boot loader even if a valid image is present in flash. |
CCFG_PROT_127_96 | Protect Sectors 96-127 Each bit write protects one flash sector from being both programmed and erased. Bit must be set to 0 in order to enable sector write protect. Not in use. |
CCFG_PROT_31_0 | Protect Sectors 0-31 Each bit write protects one 8KB flash sector from being both programmed and erased. Bit must be set to 0 in order to enable sector write protect. |
CCFG_PROT_63_32 | Protect Sectors 32-63 Each bit write protects one 8KB flash sector from being both programmed and erased. Bit must be set to 0 in order to enable sector write protect. |
CCFG_PROT_95_64 | Protect Sectors 64-95 Each bit write protects one flash sector from being both programmed and erased. Bit must be set to 0 in order to enable sector write protect. Not in use. |
CCFG_TAP_DAP_0 | Test Access Points Enable 0 |
CCFG_TAP_DAP_1 | Test Access Points Enable 1 |
CCFG_TI_OPTIONS | TI Options |
ERASE_CONF | Erase Configuration |
EXT_LF_CLK | Extern LF clock configuration |
FREQ_OFFSET | Frequency Offset |
IEEE_BLE_0 | IEEE BLE Address 0 |
IEEE_BLE_1 | IEEE BLE Address 1 |
IEEE_MAC_0 | IEEE MAC Address 0 |
IEEE_MAC_1 | IEEE MAC Address 1 |
IMAGE_VALID_CONF | Image Valid |
MODE_CONF | Mode Configuration 0 |
MODE_CONF_1 | Mode Configuration 1 |
RESERVED_0 | Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. |
RTC_OFFSET | Real Time Clock Offset Enabled by MODE_CONF.RTC_COMP. |
RegisterBlock | Register block |
SIZE_AND_DIS_FLAGS | CCFG Size and Disable Flags |
VOLT_LOAD_0 | Voltage Load 0 Enabled by MODE_CONF.VDDR_EXT_LOAD. |
VOLT_LOAD_1 | Voltage Load 1 Enabled by MODE_CONF.VDDR_EXT_LOAD. |