[−][src]Struct cc13x2_cc26x2_hal::rfc_dbell::rfcpeisl::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn internal_error(&self) -> INTERNAL_ERRORR
[src]
Bit 31 - 31:31] Select which CPU interrupt vector the RFCPEIFG.INTERNAL_ERROR interrupt should use.
pub fn boot_done(&self) -> BOOT_DONER
[src]
Bit 30 - 30:30] Select which CPU interrupt vector the RFCPEIFG.BOOT_DONE interrupt should use.
pub fn modules_unlocked(&self) -> MODULES_UNLOCKEDR
[src]
Bit 29 - 29:29] Select which CPU interrupt vector the RFCPEIFG.MODULES_UNLOCKED interrupt should use.
pub fn synth_no_lock(&self) -> SYNTH_NO_LOCKR
[src]
Bit 28 - 28:28] Select which CPU interrupt vector the RFCPEIFG.SYNTH_NO_LOCK interrupt should use.
pub fn irq27(&self) -> IRQ27R
[src]
Bit 27 - 27:27] Select which CPU interrupt vector the RFCPEIFG.IRQ27 interrupt should use.
pub fn rx_aborted(&self) -> RX_ABORTEDR
[src]
Bit 26 - 26:26] Select which CPU interrupt vector the RFCPEIFG.RX_ABORTED interrupt should use.
pub fn rx_n_data_written(&self) -> RX_N_DATA_WRITTENR
[src]
Bit 25 - 25:25] Select which CPU interrupt vector the RFCPEIFG.RX_N_DATA_WRITTEN interrupt should use.
pub fn rx_data_written(&self) -> RX_DATA_WRITTENR
[src]
Bit 24 - 24:24] Select which CPU interrupt vector the RFCPEIFG.RX_DATA_WRITTEN interrupt should use.
pub fn rx_entry_done(&self) -> RX_ENTRY_DONER
[src]
Bit 23 - 23:23] Select which CPU interrupt vector the RFCPEIFG.RX_ENTRY_DONE interrupt should use.
pub fn rx_buf_full(&self) -> RX_BUF_FULLR
[src]
Bit 22 - 22:22] Select which CPU interrupt vector the RFCPEIFG.RX_BUF_FULL interrupt should use.
pub fn rx_ctrl_ack(&self) -> RX_CTRL_ACKR
[src]
Bit 21 - 21:21] Select which CPU interrupt vector the RFCPEIFG.RX_CTRL_ACK interrupt should use.
pub fn rx_ctrl(&self) -> RX_CTRLR
[src]
Bit 20 - 20:20] Select which CPU interrupt vector the RFCPEIFG.RX_CTRL interrupt should use.
pub fn rx_empty(&self) -> RX_EMPTYR
[src]
Bit 19 - 19:19] Select which CPU interrupt vector the RFCPEIFG.RX_EMPTY interrupt should use.
pub fn rx_ignored(&self) -> RX_IGNOREDR
[src]
Bit 18 - 18:18] Select which CPU interrupt vector the RFCPEIFG.RX_IGNORED interrupt should use.
pub fn rx_nok(&self) -> RX_NOKR
[src]
Bit 17 - 17:17] Select which CPU interrupt vector the RFCPEIFG.RX_NOK interrupt should use.
pub fn rx_ok(&self) -> RX_OKR
[src]
Bit 16 - 16:16] Select which CPU interrupt vector the RFCPEIFG.RX_OK interrupt should use.
pub fn irq15(&self) -> IRQ15R
[src]
Bit 15 - 15:15] Select which CPU interrupt vector the RFCPEIFG.IRQ15 interrupt should use.
pub fn irq14(&self) -> IRQ14R
[src]
Bit 14 - 14:14] Select which CPU interrupt vector the RFCPEIFG.IRQ14 interrupt should use.
pub fn irq13(&self) -> IRQ13R
[src]
Bit 13 - 13:13] Select which CPU interrupt vector the RFCPEIFG.IRQ13 interrupt should use.
pub fn bg_command_suspended(&self) -> BG_COMMAND_SUSPENDEDR
[src]
Bit 12 - 12:12] Select which CPU interrupt vector the RFCPEIFG.BG_COMMAND_SUSPENDED interrupt should use.
pub fn tx_buffer_changed(&self) -> TX_BUFFER_CHANGEDR
[src]
Bit 11 - 11:11] Select which CPU interrupt vector the RFCPEIFG.TX_BUFFER_CHANGED interrupt should use.
pub fn tx_entry_done(&self) -> TX_ENTRY_DONER
[src]
Bit 10 - 10:10] Select which CPU interrupt vector the RFCPEIFG.TX_ENTRY_DONE interrupt should use.
pub fn tx_retrans(&self) -> TX_RETRANSR
[src]
Bit 9 - 9:9] Select which CPU interrupt vector the RFCPEIFG.TX_RETRANS interrupt should use.
pub fn tx_ctrl_ack_ack(&self) -> TX_CTRL_ACK_ACKR
[src]
Bit 8 - 8:8] Select which CPU interrupt vector the RFCPEIFG.TX_CTRL_ACK_ACK interrupt should use.
pub fn tx_ctrl_ack(&self) -> TX_CTRL_ACKR
[src]
Bit 7 - 7:7] Select which CPU interrupt vector the RFCPEIFG.TX_CTRL_ACK interrupt should use.
pub fn tx_ctrl(&self) -> TX_CTRLR
[src]
Bit 6 - 6:6] Select which CPU interrupt vector the RFCPEIFG.TX_CTRL interrupt should use.
pub fn tx_ack(&self) -> TX_ACKR
[src]
Bit 5 - 5:5] Select which CPU interrupt vector the RFCPEIFG.TX_ACK interrupt should use.
pub fn tx_done(&self) -> TX_DONER
[src]
Bit 4 - 4:4] Select which CPU interrupt vector the RFCPEIFG.TX_DONE interrupt should use.
pub fn last_fg_command_done(&self) -> LAST_FG_COMMAND_DONER
[src]
Bit 3 - 3:3] Select which CPU interrupt vector the RFCPEIFG.LAST_FG_COMMAND_DONE interrupt should use.
pub fn fg_command_done(&self) -> FG_COMMAND_DONER
[src]
Bit 2 - 2:2] Select which CPU interrupt vector the RFCPEIFG.FG_COMMAND_DONE interrupt should use.
pub fn last_command_done(&self) -> LAST_COMMAND_DONER
[src]
Bit 1 - 1:1] Select which CPU interrupt vector the RFCPEIFG.LAST_COMMAND_DONE interrupt should use.
pub fn command_done(&self) -> COMMAND_DONER
[src]
Bit 0 - 0:0] Select which CPU interrupt vector the RFCPEIFG.COMMAND_DONE interrupt should use.
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self