[−][src]Enum cc13x2_cc26x2_hal::event::udmach14bsel::EVR
Possible values of the field EV
Variants
ALWAYS_ACTIVE
Always asserted
CPU_HALTED
CPU halted
AON_RTC_UPD
RTC periodic event controlled by AON_RTC:CTL.RTC_UPD_EN
AUX_DMABREQ
DMA burst request event from AUX, configured by AUX_EVCTL:DMACTL
AUX_DMASREQ
DMA single request event from AUX, configured by AUX_EVCTL:DMACTL
AUX_SW_DMABREQ
DMA sofware trigger from AUX, triggered by AUX_EVCTL:DMASWREQ.START
AUX_ADC_IRQ
AUX ADC interrupt event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_IRQ. Status flags are found here AUX_EVCTL:EVTOMCUFLAGS
AUX_OBSMUX0
Loopback of OBSMUX0 through AUX, corresponds to AUX_EVCTL:EVTOMCUFLAGS.MCU_OBSMUX0
AUX_ADC_FIFO_ALMOST_FULL
AUX ADC FIFO watermark event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_FIFO_ALMOST_FULL
AUX_ADC_DONE
AUX ADC done, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_DONE
AUX_SMPH_AUTOTAKE_DONE
Autotake event from AUX semaphore, configured by AUX_SMPH:AUTOTAKE
AUX_TIMER1_EV
AUX timer 1 event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER1_EV
AUX_TIMER0_EV
AUX timer 0 event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER0_EV
AUX_TDC_DONE
AUX TDC measurement done event, corresponds to the flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TDC_DONE and the AUX_TDC status AUX_TDC:STAT.DONE
AUX_COMPB
AUX Compare B event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_COMPB
AUX_COMPA
AUX Compare A event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_COMPA
AUX_AON_WU_EV
AON wakeup event, the corresponding flag is here AUX_EVCTL:EVTOMCUFLAGS.AUX_WU_EV
TRNG_IRQ
TRNG Interrupt event, controlled by TRNG:IRQEN.EN
SWEV3
Software event 3, triggered by SWEV.SWEV3
SWEV2
Software event 2, triggered by SWEV.SWEV2
SWEV1
Software event 1, triggered by SWEV.SWEV1
SWEV0
Software event 0, triggered by SWEV.SWEV0
WDT_NMI
Watchdog non maskable interrupt event, controlled by WDT:CTL.INTTYPE
CRYPTO_DMA_DONE_IRQ
CRYPTO DMA input done event, the correspondingg flag is CRYPTO:IRQSTAT.DMA_IN_DONE. Controlled by CRYPTO:IRQEN.DMA_IN_DONE
CRYPTO_RESULT_AVAIL_IRQ
CRYPTO result available interupt event, the corresponding flag is found here CRYPTO:IRQSTAT.RESULT_AVAIL. Controlled by CRYPTO:IRQSTAT.RESULT_AVAIL
PORT_EVENT7
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT7 wil be routed here.
PORT_EVENT6
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT6 wil be routed here.
PORT_EVENT5
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT4 wil be routed here.
PORT_EVENT4
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT4 wil be routed here.
PORT_EVENT3
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT3 wil be routed here.
PORT_EVENT2
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT2 wil be routed here.
PORT_EVENT1
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT1 wil be routed here.
PORT_EVENT0
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT0 wil be routed here.
GPT3B_DMABREQ
GPT3B DMA trigger event. Configured by GPT3:DMAEV
GPT3A_DMABREQ
GPT3A DMA trigger event. Configured by GPT3:DMAEV
GPT2B_DMABREQ
GPT2B DMA trigger event. Configured by GPT2:DMAEV
GPT2A_DMABREQ
GPT2A DMA trigger event. Configured by GPT2:DMAEV
GPT1B_DMABREQ
GPT1B DMA trigger event. Configured by GPT1:DMAEV
GPT1A_DMABREQ
GPT1A DMA trigger event. Configured by GPT1:DMAEV
GPT0B_DMABREQ
GPT0B DMA trigger event. Configured by GPT0:DMAEV
GPT0A_DMABREQ
GPT0A DMA trigger event. Configured by GPT0:DMAEV
GPT3B_CMP
GPT3B compare event. Configured by GPT3:TBMR.TCACT
GPT3A_CMP
GPT3A compare event. Configured by GPT3:TAMR.TCACT
GPT2B_CMP
GPT2B compare event. Configured by GPT2:TBMR.TCACT
GPT2A_CMP
GPT2A compare event. Configured by GPT2:TAMR.TCACT
GPT1B_CMP
GPT1B compare event. Configured by GPT1:TBMR.TCACT
GPT1A_CMP
GPT1A compare event. Configured by GPT1:TAMR.TCACT
GPT0B_CMP
GPT0B compare event. Configured by GPT0:TBMR.TCACT
GPT0A_CMP
GPT0A compare event. Configured by GPT0:TAMR.TCACT
AUX_TIMER2_PULSE
AUX Timer2 pulse, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_PULSE
AUX_TIMER2_EV3
AUX Timer2 event 3, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV3
AUX_TIMER2_EV2
AUX Timer2 event 2, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV2
AUX_TIMER2_EV1
AUX Timer2 event 1, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV1
AUX_TIMER2_EV0
AUX Timer2 event 0, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV0
UART1_TX_DMASREQ
UART1 TX DMA single request, controlled by UART1:DMACTL.TXDMAE
UART1_TX_DMABREQ
UART1 TX DMA burst request, controlled by UART1:DMACTL.TXDMAE
UART1_RX_DMASREQ
UART1 RX DMA single request, controlled by UART1:DMACTL.RXDMAE
UART1_RX_DMABREQ
UART1 RX DMA burst request, controlled by UART1:DMACTL.RXDMAE
UART0_TX_DMASREQ
UART0 TX DMA single request, controlled by UART0:DMACTL.TXDMAE
UART0_TX_DMABREQ
UART0 TX DMA burst request, controlled by UART0:DMACTL.TXDMAE
UART0_RX_DMASREQ
UART0 RX DMA single request, controlled by UART0:DMACTL.RXDMAE
UART0_RX_DMABREQ
UART0 RX DMA burst request, controlled by UART0:DMACTL.RXDMAE
SSI1_TX_DMASREQ
SSI1 TX DMA single request, controlled by SSI0:DMACR.TXDMAE
SSI1_TX_DMABREQ
SSI1 TX DMA burst request , controlled by SSI0:DMACR.TXDMAE
SSI1_RX_DMASREQ
SSI1 RX DMA single request, controlled by SSI0:DMACR.RXDMAE
SSI1_RX_DMABREQ
SSI1 RX DMA burst request , controlled by SSI0:DMACR.RXDMAE
SSI0_TX_DMASREQ
SSI0 TX DMA single request, controlled by SSI0:DMACR.TXDMAE
SSI0_TX_DMABREQ
SSI0 TX DMA burst request , controlled by SSI0:DMACR.TXDMAE
SSI0_RX_DMASREQ
SSI0 RX DMA single request, controlled by SSI0:DMACR.RXDMAE
SSI0_RX_DMABREQ
SSI0 RX DMA burst request , controlled by SSI0:DMACR.RXDMAE
DMA_DONE_COMB
Combined DMA done, corresponding flags are here UDMA0:REQDONE
DMA_ERR
DMA bus error, corresponds to UDMA0:ERROR.STATUS
UART1_COMB
UART1 combined interrupt, interrupt flags are found here UART1:MIS
UART0_COMB
UART0 combined interrupt, interrupt flags are found here UART0:MIS
SSI1_COMB
SSI1 combined interrupt, interrupt flags are found here SSI1:MIS
SSI0_COMB
SSI0 combined interrupt, interrupt flags are found here SSI0:MIS
PKA_IRQ
PKA Interrupt event
RFC_CPE_1
Combined Interrupt for CPE Generated events. Corresponding flags are here RFC_DBELL:RFCPEIFG. Only interrupts selected with CPE1 in RFC_DBELL:RFCPEIFG can trigger a RFC_CPE_1 event
AUX_SWEV1
AUX software event 1, triggered by AUX_EVCTL:SWEVSET.SWEV1, also available as AUX_EVENT2 AON wake up event. MCU domain wakeup control AON_EVENT:MCUWUSEL
RFC_CPE_0
Combined Interrupt for CPE Generated events. Corresponding flags are here RFC_DBELL:RFCPEIFG. Only interrupts selected with CPE0 in RFC_DBELL:RFCPEIFG can trigger a RFC_CPE_0 event
RFC_HW_COMB
Combined RFC hardware interrupt, corresponding flag is here RFC_DBELL:RFHWIFG
RFC_CMD_ACK
RFC Doorbell Command Acknowledgement Interrupt, equvialent to RFC_DBELL:RFACKIFG.ACKFLAG
WDT_IRQ
Watchdog interrupt event, controlled by WDT:CTL.INTEN
DMA_CH18_DONE
DMA done for software tiggered UDMA channel 18, see UDMA0:SOFTREQ
FLASH
FLASH controller error event, the status flags are FLASH:FEDACSTAT.FSM_DONE and FLASH:FEDACSTAT.RVF_INT
DMA_CH0_DONE
DMA done for software tiggered UDMA channel 0, see UDMA0:SOFTREQ
GPT1B
GPT1B interrupt event, controlled by GPT1:TBMR
GPT1A
GPT1A interrupt event, controlled by GPT1:TAMR
GPT0B
GPT0B interrupt event, controlled by GPT0:TBMR
GPT0A
GPT0A interrupt event, controlled by GPT0:TAMR
GPT3B
GPT3B interrupt event, controlled by GPT3:TBMR
GPT3A
GPT3A interrupt event, controlled by GPT3:TAMR
GPT2B
GPT2B interrupt event, controlled by GPT2:TBMR
GPT2A
GPT2A interrupt event, controlled by GPT2:TAMR
AUX_COMB
AUX combined event, the corresponding flag register is here AUX_EVCTL:EVTOMCUFLAGS
AON_AUX_SWEV0
AUX Software event 0, AUX_EVCTL:SWEVSET.SWEV0
I2C_IRQ
Interrupt event from I2C
I2S_IRQ
Interrupt event from I2S
AON_RTC_COMB
Event from AON_RTC, controlled by the AON_RTC:CTL.COMB_EV_MASK setting
OSC_COMB
Combined event from Oscillator control
BATMON_COMB
Combined event from battery monitor
AON_GPIO_EDGE
Edge detect event from IOC. Configureded by the IOC:IOCFGn.EDGE_IRQ_EN and IOC:IOCFGn.EDGE_DET settings
AON_PROG2
AON programmable event 2. Event selected by AON_EVENT MCU event selector, AON_EVENT:EVTOMCUSEL.AON_PROG2_EV
AON_PROG1
AON programmable event 1. Event selected by AON_EVENT MCU event selector, AON_EVENT:EVTOMCUSEL.AON_PROG1_EV
AON_PROG0
AON programmable event 0. Event selected by AON_EVENT MCU event selector, AON_EVENT:EVTOMCUSEL.AON_PROG0_EV
NONE
Always inactive
_Reserved(u8)
Reserved
Methods
impl EVR
[src]
pub fn bits(&self) -> u8
[src]
Value of the field as raw bits
pub fn is_always_active(&self) -> bool
[src]
Checks if the value of the field is ALWAYS_ACTIVE
pub fn is_cpu_halted(&self) -> bool
[src]
Checks if the value of the field is CPU_HALTED
pub fn is_aon_rtc_upd(&self) -> bool
[src]
Checks if the value of the field is AON_RTC_UPD
pub fn is_aux_dmabreq(&self) -> bool
[src]
Checks if the value of the field is AUX_DMABREQ
pub fn is_aux_dmasreq(&self) -> bool
[src]
Checks if the value of the field is AUX_DMASREQ
pub fn is_aux_sw_dmabreq(&self) -> bool
[src]
Checks if the value of the field is AUX_SW_DMABREQ
pub fn is_aux_adc_irq(&self) -> bool
[src]
Checks if the value of the field is AUX_ADC_IRQ
pub fn is_aux_obsmux0(&self) -> bool
[src]
Checks if the value of the field is AUX_OBSMUX0
pub fn is_aux_adc_fifo_almost_full(&self) -> bool
[src]
Checks if the value of the field is AUX_ADC_FIFO_ALMOST_FULL
pub fn is_aux_adc_done(&self) -> bool
[src]
Checks if the value of the field is AUX_ADC_DONE
pub fn is_aux_smph_autotake_done(&self) -> bool
[src]
Checks if the value of the field is AUX_SMPH_AUTOTAKE_DONE
pub fn is_aux_timer1_ev(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER1_EV
pub fn is_aux_timer0_ev(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER0_EV
pub fn is_aux_tdc_done(&self) -> bool
[src]
Checks if the value of the field is AUX_TDC_DONE
pub fn is_aux_compb(&self) -> bool
[src]
Checks if the value of the field is AUX_COMPB
pub fn is_aux_compa(&self) -> bool
[src]
Checks if the value of the field is AUX_COMPA
pub fn is_aux_aon_wu_ev(&self) -> bool
[src]
Checks if the value of the field is AUX_AON_WU_EV
pub fn is_trng_irq(&self) -> bool
[src]
Checks if the value of the field is TRNG_IRQ
pub fn is_swev3(&self) -> bool
[src]
Checks if the value of the field is SWEV3
pub fn is_swev2(&self) -> bool
[src]
Checks if the value of the field is SWEV2
pub fn is_swev1(&self) -> bool
[src]
Checks if the value of the field is SWEV1
pub fn is_swev0(&self) -> bool
[src]
Checks if the value of the field is SWEV0
pub fn is_wdt_nmi(&self) -> bool
[src]
Checks if the value of the field is WDT_NMI
pub fn is_crypto_dma_done_irq(&self) -> bool
[src]
Checks if the value of the field is CRYPTO_DMA_DONE_IRQ
pub fn is_crypto_result_avail_irq(&self) -> bool
[src]
Checks if the value of the field is CRYPTO_RESULT_AVAIL_IRQ
pub fn is_port_event7(&self) -> bool
[src]
Checks if the value of the field is PORT_EVENT7
pub fn is_port_event6(&self) -> bool
[src]
Checks if the value of the field is PORT_EVENT6
pub fn is_port_event5(&self) -> bool
[src]
Checks if the value of the field is PORT_EVENT5
pub fn is_port_event4(&self) -> bool
[src]
Checks if the value of the field is PORT_EVENT4
pub fn is_port_event3(&self) -> bool
[src]
Checks if the value of the field is PORT_EVENT3
pub fn is_port_event2(&self) -> bool
[src]
Checks if the value of the field is PORT_EVENT2
pub fn is_port_event1(&self) -> bool
[src]
Checks if the value of the field is PORT_EVENT1
pub fn is_port_event0(&self) -> bool
[src]
Checks if the value of the field is PORT_EVENT0
pub fn is_gpt3b_dmabreq(&self) -> bool
[src]
Checks if the value of the field is GPT3B_DMABREQ
pub fn is_gpt3a_dmabreq(&self) -> bool
[src]
Checks if the value of the field is GPT3A_DMABREQ
pub fn is_gpt2b_dmabreq(&self) -> bool
[src]
Checks if the value of the field is GPT2B_DMABREQ
pub fn is_gpt2a_dmabreq(&self) -> bool
[src]
Checks if the value of the field is GPT2A_DMABREQ
pub fn is_gpt1b_dmabreq(&self) -> bool
[src]
Checks if the value of the field is GPT1B_DMABREQ
pub fn is_gpt1a_dmabreq(&self) -> bool
[src]
Checks if the value of the field is GPT1A_DMABREQ
pub fn is_gpt0b_dmabreq(&self) -> bool
[src]
Checks if the value of the field is GPT0B_DMABREQ
pub fn is_gpt0a_dmabreq(&self) -> bool
[src]
Checks if the value of the field is GPT0A_DMABREQ
pub fn is_gpt3b_cmp(&self) -> bool
[src]
Checks if the value of the field is GPT3B_CMP
pub fn is_gpt3a_cmp(&self) -> bool
[src]
Checks if the value of the field is GPT3A_CMP
pub fn is_gpt2b_cmp(&self) -> bool
[src]
Checks if the value of the field is GPT2B_CMP
pub fn is_gpt2a_cmp(&self) -> bool
[src]
Checks if the value of the field is GPT2A_CMP
pub fn is_gpt1b_cmp(&self) -> bool
[src]
Checks if the value of the field is GPT1B_CMP
pub fn is_gpt1a_cmp(&self) -> bool
[src]
Checks if the value of the field is GPT1A_CMP
pub fn is_gpt0b_cmp(&self) -> bool
[src]
Checks if the value of the field is GPT0B_CMP
pub fn is_gpt0a_cmp(&self) -> bool
[src]
Checks if the value of the field is GPT0A_CMP
pub fn is_aux_timer2_pulse(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER2_PULSE
pub fn is_aux_timer2_ev3(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER2_EV3
pub fn is_aux_timer2_ev2(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER2_EV2
pub fn is_aux_timer2_ev1(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER2_EV1
pub fn is_aux_timer2_ev0(&self) -> bool
[src]
Checks if the value of the field is AUX_TIMER2_EV0
pub fn is_uart1_tx_dmasreq(&self) -> bool
[src]
Checks if the value of the field is UART1_TX_DMASREQ
pub fn is_uart1_tx_dmabreq(&self) -> bool
[src]
Checks if the value of the field is UART1_TX_DMABREQ
pub fn is_uart1_rx_dmasreq(&self) -> bool
[src]
Checks if the value of the field is UART1_RX_DMASREQ
pub fn is_uart1_rx_dmabreq(&self) -> bool
[src]
Checks if the value of the field is UART1_RX_DMABREQ
pub fn is_uart0_tx_dmasreq(&self) -> bool
[src]
Checks if the value of the field is UART0_TX_DMASREQ
pub fn is_uart0_tx_dmabreq(&self) -> bool
[src]
Checks if the value of the field is UART0_TX_DMABREQ
pub fn is_uart0_rx_dmasreq(&self) -> bool
[src]
Checks if the value of the field is UART0_RX_DMASREQ
pub fn is_uart0_rx_dmabreq(&self) -> bool
[src]
Checks if the value of the field is UART0_RX_DMABREQ
pub fn is_ssi1_tx_dmasreq(&self) -> bool
[src]
Checks if the value of the field is SSI1_TX_DMASREQ
pub fn is_ssi1_tx_dmabreq(&self) -> bool
[src]
Checks if the value of the field is SSI1_TX_DMABREQ
pub fn is_ssi1_rx_dmasreq(&self) -> bool
[src]
Checks if the value of the field is SSI1_RX_DMASREQ
pub fn is_ssi1_rx_dmabreq(&self) -> bool
[src]
Checks if the value of the field is SSI1_RX_DMABREQ
pub fn is_ssi0_tx_dmasreq(&self) -> bool
[src]
Checks if the value of the field is SSI0_TX_DMASREQ
pub fn is_ssi0_tx_dmabreq(&self) -> bool
[src]
Checks if the value of the field is SSI0_TX_DMABREQ
pub fn is_ssi0_rx_dmasreq(&self) -> bool
[src]
Checks if the value of the field is SSI0_RX_DMASREQ
pub fn is_ssi0_rx_dmabreq(&self) -> bool
[src]
Checks if the value of the field is SSI0_RX_DMABREQ
pub fn is_dma_done_comb(&self) -> bool
[src]
Checks if the value of the field is DMA_DONE_COMB
pub fn is_dma_err(&self) -> bool
[src]
Checks if the value of the field is DMA_ERR
pub fn is_uart1_comb(&self) -> bool
[src]
Checks if the value of the field is UART1_COMB
pub fn is_uart0_comb(&self) -> bool
[src]
Checks if the value of the field is UART0_COMB
pub fn is_ssi1_comb(&self) -> bool
[src]
Checks if the value of the field is SSI1_COMB
pub fn is_ssi0_comb(&self) -> bool
[src]
Checks if the value of the field is SSI0_COMB
pub fn is_pka_irq(&self) -> bool
[src]
Checks if the value of the field is PKA_IRQ
pub fn is_rfc_cpe_1(&self) -> bool
[src]
Checks if the value of the field is RFC_CPE_1
pub fn is_aux_swev1(&self) -> bool
[src]
Checks if the value of the field is AUX_SWEV1
pub fn is_rfc_cpe_0(&self) -> bool
[src]
Checks if the value of the field is RFC_CPE_0
pub fn is_rfc_hw_comb(&self) -> bool
[src]
Checks if the value of the field is RFC_HW_COMB
pub fn is_rfc_cmd_ack(&self) -> bool
[src]
Checks if the value of the field is RFC_CMD_ACK
pub fn is_wdt_irq(&self) -> bool
[src]
Checks if the value of the field is WDT_IRQ
pub fn is_dma_ch18_done(&self) -> bool
[src]
Checks if the value of the field is DMA_CH18_DONE
pub fn is_flash(&self) -> bool
[src]
Checks if the value of the field is FLASH
pub fn is_dma_ch0_done(&self) -> bool
[src]
Checks if the value of the field is DMA_CH0_DONE
pub fn is_gpt1b(&self) -> bool
[src]
Checks if the value of the field is GPT1B
pub fn is_gpt1a(&self) -> bool
[src]
Checks if the value of the field is GPT1A
pub fn is_gpt0b(&self) -> bool
[src]
Checks if the value of the field is GPT0B
pub fn is_gpt0a(&self) -> bool
[src]
Checks if the value of the field is GPT0A
pub fn is_gpt3b(&self) -> bool
[src]
Checks if the value of the field is GPT3B
pub fn is_gpt3a(&self) -> bool
[src]
Checks if the value of the field is GPT3A
pub fn is_gpt2b(&self) -> bool
[src]
Checks if the value of the field is GPT2B
pub fn is_gpt2a(&self) -> bool
[src]
Checks if the value of the field is GPT2A
pub fn is_aux_comb(&self) -> bool
[src]
Checks if the value of the field is AUX_COMB
pub fn is_aon_aux_swev0(&self) -> bool
[src]
Checks if the value of the field is AON_AUX_SWEV0
pub fn is_i2c_irq(&self) -> bool
[src]
Checks if the value of the field is I2C_IRQ
pub fn is_i2s_irq(&self) -> bool
[src]
Checks if the value of the field is I2S_IRQ
pub fn is_aon_rtc_comb(&self) -> bool
[src]
Checks if the value of the field is AON_RTC_COMB
pub fn is_osc_comb(&self) -> bool
[src]
Checks if the value of the field is OSC_COMB
pub fn is_batmon_comb(&self) -> bool
[src]
Checks if the value of the field is BATMON_COMB
pub fn is_aon_gpio_edge(&self) -> bool
[src]
Checks if the value of the field is AON_GPIO_EDGE
pub fn is_aon_prog2(&self) -> bool
[src]
Checks if the value of the field is AON_PROG2
pub fn is_aon_prog1(&self) -> bool
[src]
Checks if the value of the field is AON_PROG1
pub fn is_aon_prog0(&self) -> bool
[src]
Checks if the value of the field is AON_PROG0
pub fn is_none(&self) -> bool
[src]
Checks if the value of the field is NONE
Trait Implementations
impl PartialEq<EVR> for EVR
[src]
impl Clone for EVR
[src]
fn clone(&self) -> EVR
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Copy for EVR
[src]
impl Debug for EVR
[src]
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self