[−][src]Struct cc13x2_cc26x2_hal::event::rfcsel9::_EVW
Proxy
Methods
impl<'a> _EVW<'a>
[src]
pub fn variant(self, variant: EVW) -> &'a mut W
[src]
Writes variant
to the field
pub fn always_active(self) -> &'a mut W
[src]
Always asserted
pub fn aux_adc_irq(self) -> &'a mut W
[src]
AUX ADC interrupt event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_IRQ. Status flags are found here AUX_EVCTL:EVTOMCUFLAGS
pub fn aux_obsmux0(self) -> &'a mut W
[src]
Loopback of OBSMUX0 through AUX, corresponds to AUX_EVCTL:EVTOMCUFLAGS.MCU_OBSMUX0
pub fn aux_adc_fifo_almost_full(self) -> &'a mut W
[src]
AUX ADC FIFO watermark event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_FIFO_ALMOST_FULL
pub fn aux_adc_done(self) -> &'a mut W
[src]
AUX ADC done, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_DONE
pub fn aux_smph_autotake_done(self) -> &'a mut W
[src]
Autotake event from AUX semaphore, configured by AUX_SMPH:AUTOTAKE
pub fn aux_timer1_ev(self) -> &'a mut W
[src]
AUX timer 1 event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER1_EV
pub fn aux_timer0_ev(self) -> &'a mut W
[src]
AUX timer 0 event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER0_EV
pub fn aux_tdc_done(self) -> &'a mut W
[src]
AUX TDC measurement done event, corresponds to the flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TDC_DONE and the AUX_TDC status AUX_TDC:STAT.DONE
pub fn aux_compb(self) -> &'a mut W
[src]
AUX Compare B event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_COMPB
pub fn aux_compa(self) -> &'a mut W
[src]
AUX Compare A event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_COMPA
pub fn aux_aon_wu_ev(self) -> &'a mut W
[src]
AON wakeup event, the corresponding flag is here AUX_EVCTL:EVTOMCUFLAGS.AUX_WU_EV
pub fn swev1(self) -> &'a mut W
[src]
Software event 1, triggered by SWEV.SWEV1
pub fn swev0(self) -> &'a mut W
[src]
Software event 0, triggered by SWEV.SWEV0
pub fn crypto_result_avail_irq(self) -> &'a mut W
[src]
CRYPTO result available interupt event, the corresponding flag is found here CRYPTO:IRQSTAT.RESULT_AVAIL. Controlled by CRYPTO:IRQSTAT.RESULT_AVAIL
pub fn aux_timer2_pulse(self) -> &'a mut W
[src]
AUX Timer2 pulse, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_PULSE
pub fn aux_timer2_ev3(self) -> &'a mut W
[src]
AUX Timer2 event 3, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV3
pub fn aux_timer2_ev2(self) -> &'a mut W
[src]
AUX Timer2 event 2, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV2
pub fn aux_timer2_ev1(self) -> &'a mut W
[src]
AUX Timer2 event 1, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV1
pub fn aux_timer2_ev0(self) -> &'a mut W
[src]
AUX Timer2 event 0, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV0
pub fn dma_done_comb(self) -> &'a mut W
[src]
Combined DMA done, corresponding flags are here UDMA0:REQDONE
pub fn uart1_comb(self) -> &'a mut W
[src]
UART1 combined interrupt, interrupt flags are found here UART1:MIS
pub fn uart0_comb(self) -> &'a mut W
[src]
UART0 combined interrupt, interrupt flags are found here UART0:MIS
pub fn ssi1_comb(self) -> &'a mut W
[src]
SSI1 combined interrupt, interrupt flags are found here SSI1:MIS
pub fn ssi0_comb(self) -> &'a mut W
[src]
SSI0 combined interrupt, interrupt flags are found here SSI0:MIS
pub fn wdt_irq(self) -> &'a mut W
[src]
Watchdog interrupt event, controlled by WDT:CTL.INTEN
pub fn aon_aux_swev0(self) -> &'a mut W
[src]
AUX Software event 0, AUX_EVCTL:SWEVSET.SWEV0
pub fn i2s_irq(self) -> &'a mut W
[src]
Interrupt event from I2S
pub fn aon_prog1(self) -> &'a mut W
[src]
AON programmable event 1. Event selected by AON_EVENT MCU event selector, AON_EVENT:EVTOMCUSEL.AON_PROG1_EV
pub fn aon_prog0(self) -> &'a mut W
[src]
AON programmable event 0. Event selected by AON_EVENT MCU event selector, AON_EVENT:EVTOMCUSEL.AON_PROG0_EV
pub fn none(self) -> &'a mut W
[src]
Always inactive
pub unsafe fn bits(self, value: u8) -> &'a mut W
[src]
Writes raw bits to the field
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self