[−][src]Struct cc13x2_cc26x2_hal::cpu_scs::nvic_icpr1::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn reserved6(&mut self) -> _RESERVED6W
[src]
Bits 6:31 - 31:6] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn clrpend37(&mut self) -> _CLRPEND37W
[src]
Bit 5 - 5:5] Writing 0 to this bit has no effect, writing 1 to this bit clears the corresponding pending interrupt 37 (See EVENT:CPUIRQSEL37.EV for details). Reading the bit returns its current state.
pub fn clrpend36(&mut self) -> _CLRPEND36W
[src]
Bit 4 - 4:4] Writing 0 to this bit has no effect, writing 1 to this bit clears the corresponding pending interrupt 36 (See EVENT:CPUIRQSEL36.EV for details). Reading the bit returns its current state.
pub fn clrpend35(&mut self) -> _CLRPEND35W
[src]
Bit 3 - 3:3] Writing 0 to this bit has no effect, writing 1 to this bit clears the corresponding pending interrupt 35 (See EVENT:CPUIRQSEL35.EV for details). Reading the bit returns its current state.
pub fn clrpend34(&mut self) -> _CLRPEND34W
[src]
Bit 2 - 2:2] Writing 0 to this bit has no effect, writing 1 to this bit clears the corresponding pending interrupt 34 (See EVENT:CPUIRQSEL34.EV for details). Reading the bit returns its current state.
pub fn clrpend33(&mut self) -> _CLRPEND33W
[src]
Bit 1 - 1:1] Writing 0 to this bit has no effect, writing 1 to this bit clears the corresponding pending interrupt 33 (See EVENT:CPUIRQSEL33.EV for details). Reading the bit returns its current state.
pub fn clrpend32(&mut self) -> _CLRPEND32W
[src]
Bit 0 - 0:0] Writing 0 to this bit has no effect, writing 1 to this bit clears the corresponding pending interrupt 32 (See EVENT:CPUIRQSEL32.EV for details). Reading the bit returns its current state.
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self