[−][src]Struct cc13x2_cc26x2_hal::aux_sysif::wuflagsclr::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn reserved8(&mut self) -> _RESERVED8W
[src]
Bits 8:31 - 31:8] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn sw_wu3(&mut self) -> _SW_WU3W
[src]
Bit 7 - 7:7] Clear software wakeup flag 3. 0: No effect. 1: Clear WUFLAGS.SW_WU3. Keep high until WUFLAGS.SW_WU3 is 0.
pub fn sw_wu2(&mut self) -> _SW_WU2W
[src]
Bit 6 - 6:6] Clear software wakeup flag 2. 0: No effect. 1: Clear WUFLAGS.SW_WU2. Keep high until WUFLAGS.SW_WU2 is 0.
pub fn sw_wu1(&mut self) -> _SW_WU1W
[src]
Bit 5 - 5:5] Clear software wakeup flag 1. 0: No effect. 1: Clear WUFLAGS.SW_WU1. Keep high until WUFLAGS.SW_WU1 is 0.
pub fn sw_wu0(&mut self) -> _SW_WU0W
[src]
Bit 4 - 4:4] Clear software wakeup flag 0. 0: No effect. 1: Clear WUFLAGS.SW_WU0. Keep high until WUFLAGS.SW_WU0 is 0.
pub fn prog_wu3(&mut self) -> _PROG_WU3W
[src]
Bit 3 - 3:3] Programmable wakeup flag 3. 0: No effect. 1: Clear WUFLAGS.PROG_WU3. Keep high until WUFLAGS.PROG_WU3 is 0. The wakeup flag becomes edge sensitive if you write PROG_WU3 to 0 when PROGWU3CFG.EN is 1. The wakeup flag becomes level sensitive if you write PROG_WU3 to 0 when PROGWU3CFG.EN is 0, then set PROGWU3CFG.EN.
pub fn prog_wu2(&mut self) -> _PROG_WU2W
[src]
Bit 2 - 2:2] Programmable wakeup flag 2. 0: No effect. 1: Clear WUFLAGS.PROG_WU2. Keep high until WUFLAGS.PROG_WU2 is 0. The wakeup flag becomes edge sensitive if you write PROG_WU2 to 0 when PROGWU2CFG.EN is 1. The wakeup flag becomes level sensitive if you write PROG_WU2 to 0 when PROGWU2CFG.EN is 0, then set PROGWU2CFG.EN.
pub fn prog_wu1(&mut self) -> _PROG_WU1W
[src]
Bit 1 - 1:1] Programmable wakeup flag 1. 0: No effect. 1: Clear WUFLAGS.PROG_WU1. Keep high until WUFLAGS.PROG_WU1 is 0. The wakeup flag becomes edge sensitive if you write PROG_WU1 to 0 when PROGWU1CFG.EN is 1. The wakeup flag becomes level sensitive if you write PROG_WU1 to 0 when PROGWU1CFG.EN is 0, then set PROGWU1CFG.EN.
pub fn prog_wu0(&mut self) -> _PROG_WU0W
[src]
Bit 0 - 0:0] Programmable wakeup flag 0. 0: No effect. 1: Clear WUFLAGS.PROG_WU0. Keep high until WUFLAGS.PROG_WU0 is 0. The wakeup flag becomes edge sensitive if you write PROG_WU0 to 0 when PROGWU0CFG.EN is 1. The wakeup flag becomes level sensitive if you write PROG_WU0 to 0 when PROGWU0CFG.EN is 0, then set PROGWU0CFG.EN.
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self