[−][src]Struct cc13x2_cc26x2_hal::aux_evctl::evstat0::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn reserved16(&mut self) -> _RESERVED16W
[src]
Bits 16:31 - 31:16] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn auxio15(&mut self) -> _AUXIO15W
[src]
Bit 15 - 15:15] AUXIO15 pin level, read value corresponds to AUX_AIODIO1:GPIODIN bit 7.
pub fn auxio14(&mut self) -> _AUXIO14W
[src]
Bit 14 - 14:14] AUXIO14 pin level, read value corresponds to AUX_AIODIO1:GPIODIN bit 6.
pub fn auxio13(&mut self) -> _AUXIO13W
[src]
Bit 13 - 13:13] AUXIO13 pin level, read value corresponds to AUX_AIODIO1:GPIODIN bit 5.
pub fn auxio12(&mut self) -> _AUXIO12W
[src]
Bit 12 - 12:12] AUXIO12 pin level, read value corresponds to AUX_AIODIO1:GPIODIN bit 4.
pub fn auxio11(&mut self) -> _AUXIO11W
[src]
Bit 11 - 11:11] AUXIO11 pin level, read value corresponds to AUX_AIODIO1:GPIODIN bit 3.
pub fn auxio10(&mut self) -> _AUXIO10W
[src]
Bit 10 - 10:10] AUXIO10 pin level, read value corresponds to AUX_AIODIO1:GPIODIN bit 2.
pub fn auxio9(&mut self) -> _AUXIO9W
[src]
Bit 9 - 9:9] AUXIO9 pin level, read value corresponds to AUX_AIODIO1:GPIODIN bit 1.
pub fn auxio8(&mut self) -> _AUXIO8W
[src]
Bit 8 - 8:8] AUXIO8 pin level, read value corresponds to AUX_AIODIO1:GPIODIN bit 0.
pub fn auxio7(&mut self) -> _AUXIO7W
[src]
Bit 7 - 7:7] AUXIO7 pin level, read value corresponds to AUX_AIODIO0:GPIODIN bit 7.
pub fn auxio6(&mut self) -> _AUXIO6W
[src]
Bit 6 - 6:6] AUXIO6 pin level, read value corresponds to AUX_AIODIO0:GPIODIN bit 6.
pub fn auxio5(&mut self) -> _AUXIO5W
[src]
Bit 5 - 5:5] AUXIO5 pin level, read value corresponds to AUX_AIODIO0:GPIODIN bit 5.
pub fn auxio4(&mut self) -> _AUXIO4W
[src]
Bit 4 - 4:4] AUXIO4 pin level, read value corresponds to AUX_AIODIO0:GPIODIN bit 4.
pub fn auxio3(&mut self) -> _AUXIO3W
[src]
Bit 3 - 3:3] AUXIO3 pin level, read value corresponds to AUX_AIODIO0:GPIODIN bit 3.
pub fn auxio2(&mut self) -> _AUXIO2W
[src]
Bit 2 - 2:2] AUXIO2 pin level, read value corresponds to AUX_AIODIO0:GPIODIN bit 2.
pub fn auxio1(&mut self) -> _AUXIO1W
[src]
Bit 1 - 1:1] AUXIO1 pin level, read value corresponds to AUX_AIODIO0:GPIODIN bit 1.
pub fn auxio0(&mut self) -> _AUXIO0W
[src]
Bit 0 - 0:0] AUXIO0 pin level, read value corresponds to AUX_AIODIO0:GPIODIN bit 0.
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self