[−][src]Enum cc13x2_cc26x2_hal::aux_aiodio0::iomode::IO2R
Possible values of the field IO2
Variants
OPEN_SOURCE
Open-Source Mode:
When IOPOE bit 2 is 0:
- If GPIODOUT bit 2 is 0: AUXIO[8i+2] is tri-stated or pulled. This depends on IOC:IOCFGn.PULL_CTL.
- If GPIODOUT bit 2 is 1: AUXIO[8i+2] is driven high.
When IOPOE bit 2 is 1:
- If signal selected by IO2PSEL.SRC is 0: AUXIO[8i+2] is tri-stated or pulled. This depends on IOC:IOCFGn.PULL_CTL.
- If signal selected by IO2PSEL.SRC is 1: AUXIO[8i+2] is driven high.
OPEN_DRAIN
Open-Drain Mode:
When IOPOE bit 2 is 0:
- If GPIODOUT bit 2 is 0: AUXIO[8i+2] is driven low.
- If GPIODOUT bit 2 is 1: AUXIO[8i+2] is tri-stated or pulled. This depends on IOC:IOCFGn.PULL_CTL.
When IOPOE bit 2 is 1:
- If signal selected by IO2PSEL.SRC is 0: AUXIO[8i+2] is driven low.
- If signal selected by IO2PSEL.SRC is 1: AUXIO[8i+2] is tri-stated or pulled. This depends on IOC:IOCFGn.PULL_CTL.
IN
Input Mode:
When GPIODIE bit 2 is 0: AUXIO[8i+2] is enabled for analog signal transfer.
When GPIODIE bit 2 is 1: AUXIO[8i+2] is enabled for digital input.
OUT
Output Mode:
When IOPOE bit 2 is 0: GPIODOUT bit 2 drives AUXIO[8i+2].
When IOPOE bit 2 is 1: The signal selected by IO2PSEL.SRC drives AUXIO[8i+2].
Methods
impl IO2R
[src]
pub fn bits(&self) -> u8
[src]
Value of the field as raw bits
pub fn is_open_source(&self) -> bool
[src]
Checks if the value of the field is OPEN_SOURCE
pub fn is_open_drain(&self) -> bool
[src]
Checks if the value of the field is OPEN_DRAIN
pub fn is_in_(&self) -> bool
[src]
Checks if the value of the field is IN
pub fn is_out(&self) -> bool
[src]
Checks if the value of the field is OUT
Trait Implementations
impl PartialEq<IO2R> for IO2R
[src]
fn eq(&self, other: &IO2R) -> bool
[src]
#[must_use]
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl Clone for IO2R
[src]
fn clone(&self) -> IO2R
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Copy for IO2R
[src]
impl Debug for IO2R
[src]
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self