[−][src]Struct cc13x2_cc26x2_hal::pka::options::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn reserved12(&mut self) -> _RESERVED12W
[src]
Bits 12:31 - 31:12] Ignore on read
pub fn int_masking(&mut self) -> _INT_MASKINGW
[src]
Bit 11 - 11:11] Interrupt Masking 0x0: indicates that the main interrupt output (bit [1] of the interrupts output bus) is the direct complement of the run bit in the PKA_CONTROL register, 0x1 : indicates that interrupt masking logic is present for this output. Note: Reset value is undefined
pub fn protection_option(&mut self) -> _PROTECTION_OPTIONW
[src]
Bits 8:10 - 10:8] Protection Option 0x0: indicates no additional protection against side channel attacks, 0x1: indicates the SCAP option 0x2: Reserved 0x3: indicates the PROT option; Note: Reset value is undefined
pub fn program_ram(&mut self) -> _PROGRAM_RAMW
[src]
Bit 7 - 7:7] Program RAM 0x1: indicates sequencer program storage in RAM, 0x0: indicates sequencer program storage in ROM. Note: Reset value is undefined
pub fn sequencer_configuration(&mut self) -> _SEQUENCER_CONFIGURATIONW
[src]
Bits 5:6 - 6:5] Sequencer Configuration 0x0: Reserved 0x1 : Indicates a standard sequencer 0x2: Reserved 0x3: Reserved
pub fn reserved2(&mut self) -> _RESERVED2W
[src]
Bits 2:4 - 4:2] Ignore on read
pub fn pkcp_configuration(&mut self) -> _PKCP_CONFIGURATIONW
[src]
Bits 0:1 - 1:0] PKCP Configuration 0x0 : Reserved 0x1 : Indicates a PKCP with a 16x16 multiplier, 0x2: indicates a PKCP with a 32x32 multiplier, 0x3 : Reserved Note: Reset value is undefined.
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self