[−][src]Struct cc13x2_cc26x2_hal::event::gpt3acaptsel::_EVW
Proxy
Methods
impl<'a> _EVW<'a>
[src]
pub fn variant(self, variant: EVW) -> &'a mut W
[src]
Writes variant
to the field
pub fn always_active(self) -> &'a mut W
[src]
Always asserted
pub fn aon_rtc_upd(self) -> &'a mut W
[src]
RTC periodic event controlled by AON_RTC:CTL.RTC_UPD_EN
pub fn aux_adc_irq(self) -> &'a mut W
[src]
AUX ADC interrupt event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_IRQ. Status flags are found here AUX_EVCTL:EVTOMCUFLAGS
pub fn aux_obsmux0(self) -> &'a mut W
[src]
Loopback of OBSMUX0 through AUX, corresponds to AUX_EVCTL:EVTOMCUFLAGS.MCU_OBSMUX0
pub fn aux_adc_fifo_almost_full(self) -> &'a mut W
[src]
AUX ADC FIFO watermark event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_FIFO_ALMOST_FULL
pub fn aux_adc_done(self) -> &'a mut W
[src]
AUX ADC done, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_ADC_DONE
pub fn aux_smph_autotake_done(self) -> &'a mut W
[src]
Autotake event from AUX semaphore, configured by AUX_SMPH:AUTOTAKE
pub fn aux_timer1_ev(self) -> &'a mut W
[src]
AUX timer 1 event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER1_EV
pub fn aux_timer0_ev(self) -> &'a mut W
[src]
AUX timer 0 event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER0_EV
pub fn aux_tdc_done(self) -> &'a mut W
[src]
AUX TDC measurement done event, corresponds to the flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TDC_DONE and the AUX_TDC status AUX_TDC:STAT.DONE
pub fn aux_compb(self) -> &'a mut W
[src]
AUX Compare B event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_COMPB
pub fn aux_compa(self) -> &'a mut W
[src]
AUX Compare A event, corresponds to AUX_EVCTL:EVTOMCUFLAGS.AUX_COMPA
pub fn aux_aon_wu_ev(self) -> &'a mut W
[src]
AON wakeup event, the corresponding flag is here AUX_EVCTL:EVTOMCUFLAGS.AUX_WU_EV
pub fn port_event7(self) -> &'a mut W
[src]
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT7 wil be routed here.
pub fn port_event6(self) -> &'a mut W
[src]
Port capture event from IOC, configured by IOC:IOCFGn.PORT_ID. Events on ports configured with ENUM PORT_EVENT6 wil be routed here.
pub fn gpt3b_cmp(self) -> &'a mut W
[src]
GPT3B compare event. Configured by GPT3:TBMR.TCACT
pub fn gpt3a_cmp(self) -> &'a mut W
[src]
GPT3A compare event. Configured by GPT3:TAMR.TCACT
pub fn gpt2b_cmp(self) -> &'a mut W
[src]
GPT2B compare event. Configured by GPT2:TBMR.TCACT
pub fn gpt2a_cmp(self) -> &'a mut W
[src]
GPT2A compare event. Configured by GPT2:TAMR.TCACT
pub fn gpt1b_cmp(self) -> &'a mut W
[src]
GPT1B compare event. Configured by GPT1:TBMR.TCACT
pub fn gpt1a_cmp(self) -> &'a mut W
[src]
GPT1A compare event. Configured by GPT1:TAMR.TCACT
pub fn gpt0b_cmp(self) -> &'a mut W
[src]
GPT0B compare event. Configured by GPT0:TBMR.TCACT
pub fn gpt0a_cmp(self) -> &'a mut W
[src]
GPT0A compare event. Configured by GPT0:TAMR.TCACT
pub fn aux_timer2_pulse(self) -> &'a mut W
[src]
AUX Timer2 pulse, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_PULSE
pub fn aux_timer2_ev3(self) -> &'a mut W
[src]
AUX Timer2 event 3, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV3
pub fn aux_timer2_ev2(self) -> &'a mut W
[src]
AUX Timer2 event 2, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV2
pub fn aux_timer2_ev1(self) -> &'a mut W
[src]
AUX Timer2 event 1, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV1
pub fn aux_timer2_ev0(self) -> &'a mut W
[src]
AUX Timer2 event 0, corresponding to flag AUX_EVCTL:EVTOMCUFLAGS.AUX_TIMER2_EV0
pub fn uart1_comb(self) -> &'a mut W
[src]
UART1 combined interrupt, interrupt flags are found here UART1:MIS
pub fn uart0_comb(self) -> &'a mut W
[src]
UART0 combined interrupt, interrupt flags are found here UART0:MIS
pub fn ssi1_comb(self) -> &'a mut W
[src]
SSI1 combined interrupt, interrupt flags are found here SSI1:MIS
pub fn ssi0_comb(self) -> &'a mut W
[src]
SSI0 combined interrupt, interrupt flags are found here SSI0:MIS
pub fn rfc_cpe_1(self) -> &'a mut W
[src]
Combined Interrupt for CPE Generated events. Corresponding flags are here RFC_DBELL:RFCPEIFG. Only interrupts selected with CPE1 in RFC_DBELL:RFCPEIFG can trigger a RFC_CPE_1 event
pub fn rfc_cpe_0(self) -> &'a mut W
[src]
Combined Interrupt for CPE Generated events. Corresponding flags are here RFC_DBELL:RFCPEIFG. Only interrupts selected with CPE0 in RFC_DBELL:RFCPEIFG can trigger a RFC_CPE_0 event
pub fn rfc_hw_comb(self) -> &'a mut W
[src]
Combined RFC hardware interrupt, corresponding flag is here RFC_DBELL:RFHWIFG
pub fn rfc_cmd_ack(self) -> &'a mut W
[src]
RFC Doorbell Command Acknowledgement Interrupt, equvialent to RFC_DBELL:RFACKIFG.ACKFLAG
pub fn flash(self) -> &'a mut W
[src]
FLASH controller error event, the status flags are FLASH:FEDACSTAT.FSM_DONE and FLASH:FEDACSTAT.RVF_INT
pub fn aux_comb(self) -> &'a mut W
[src]
AUX combined event, the corresponding flag register is here AUX_EVCTL:EVTOMCUFLAGS
pub fn i2c_irq(self) -> &'a mut W
[src]
Interrupt event from I2C
pub fn aon_rtc_comb(self) -> &'a mut W
[src]
Event from AON_RTC, controlled by the AON_RTC:CTL.COMB_EV_MASK setting
pub fn osc_comb(self) -> &'a mut W
[src]
Combined event from Oscillator control
pub fn batmon_comb(self) -> &'a mut W
[src]
Combined event from battery monitor
pub fn aon_gpio_edge(self) -> &'a mut W
[src]
Edge detect event from IOC. Configureded by the IOC:IOCFGn.EDGE_IRQ_EN and IOC:IOCFGn.EDGE_DET settings
pub fn none(self) -> &'a mut W
[src]
Always inactive
pub unsafe fn bits(self, value: u8) -> &'a mut W
[src]
Writes raw bits to the field
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self