[−][src]Struct cc13x2_cc26x2_hal::aon_rtc::RegisterBlock
Register block
Fields
ctl: CTL
0x00 - Control This register contains various bitfields for configuration of RTC RTL Name = CONFIG
evflags: EVFLAGS
0x04 - Event Flags, RTC Status This register contains event flags from the 3 RTC channels. Each flag will be cleared when writing a '1' to the corresponding bitfield.
sec: SEC
0x08 - Second Counter Value, Integer Part
subsec: SUBSEC
0x0c - Second Counter Value, Fractional Part
subsecinc: SUBSECINC
0x10 - Subseconds Increment Value added to SUBSEC.VALUE on every SCLK_LFclock cycle.
chctl: CHCTL
0x14 - Channel Configuration
ch0cmp: CH0CMP
0x18 - Channel 0 Compare Value
ch1cmp: CH1CMP
0x1c - Channel 1 Compare Value
ch2cmp: CH2CMP
0x20 - Channel 2 Compare Value
ch2cmpinc: CH2CMPINC
0x24 - Channel 2 Compare Value Auto-increment This register is primarily used to generate periodical wake-up for the AUX_SCE module, through the [AUX_EVCTL.EVSTAT0.AON_RTC] event.
ch1capt: CH1CAPT
0x28 - Channel 1 Capture Value If CHCTL.CH1_EN = 1and CHCTL.CH1_CAPT_EN = 1, capture occurs on each rising edge of the event selected in AON_EVENT:RTCSEL.
sync: SYNC
0x2c - AON Synchronization This register is used for synchronizing between MCU and entire AON domain.
time: TIME
0x30 - Current Counter Value
synclf: SYNCLF
0x34 - Synchronization to SCLK_LF This register is used for synchronizing MCU to positive or negative edge of SCLK_LF.
Auto Trait Implementations
impl Send for RegisterBlock
impl !Sync for RegisterBlock
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self