[−][src]Enum cc13x2_cc26x2_hal::aon_event::mcuwusel::WU2_EVW
Values that can be written to the field WU2_EV
Variants
NONE
No event, always low
AUX_COMPB_ASYNC_N
Comparator B not triggered. Asynchronous signal directly from AUX Comparator B (inverted) as opposed to AUX_COMPB which is synchronized in AUX
AUX_COMPB_ASYNC
Comparator B triggered. Asynchronous signal directly from the AUX Comparator B as opposed to AUX_COMPB which is synchronized in AUX
BATMON_VOLT
BATMON voltage update event
BATMON_TEMP
BATMON temperature update event
AUX_TIMER1_EV
AUX Timer 1 Event
AUX_TIMER0_EV
AUX Timer 0 Event
AUX_TDC_DONE
TDC completed or timed out
AUX_ADC_DONE
ADC conversion completed
AUX_COMPB
Comparator B triggered
AUX_COMPA
Comparator A triggered
AUX_SWEV2
AUX Software triggered event #2. Triggered by AUX_EVCTL:SWEVSET.SWEV2
AUX_SWEV1
AUX Software triggered event #1. Triggered by AUX_EVCTL:SWEVSET.SWEV1
AUX_SWEV0
AUX Software triggered event #0. Triggered by AUX_EVCTL:SWEVSET.SWEV0
JTAG
JTAG generated event
RTC_UPD
RTC Update Tick (16 kHz signal, i.e. event line toggles value every 32 kHz clock period)
RTC_COMB_DLY
RTC combined delayed event
RTC_CH2_DLY
RTC channel 2 - delayed event
RTC_CH1_DLY
RTC channel 1 - delayed event
RTC_CH0_DLY
RTC channel 0 - delayed event
RTC_CH2
RTC channel 2 event
RTC_CH1
RTC channel 1 event
RTC_CH0
RTC channel 0 event
PAD
Edge detect on any PAD
BATMON_COMBINED
Combined event from BATMON
BATMON_TEMP_LL
BATMON event: Temperature level below lower limit
BATMON_TEMP_UL
BATMON event: Temperature level above upper limit
BATMON_BATT_LL
BATMON event: Battery level below lower limit
BATMON_BATT_UL
BATMON event: Battery level above upper limit
AUX_TIMER2_EV3
Event 3 from AUX TImer2
AUX_TIMER2_EV2
Event 2 from AUX TImer2
AUX_TIMER2_EV1
Event 1 from AUX TImer2
AUX_TIMER2_EV0
Event 0 from AUX TImer2
IOEV_MCU_WU
Edge detect IO event from the DIO(s) which have enabled contribution to IOEV_MCU_WU in [MCU_IOC:IOCFGx.IOEV_MCU_WU_EN]
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self