Struct cap_std::net::UdpSocket [−][src]
A UDP socket.
This corresponds to std::net::UdpSocket.
Note that this UdpSocket has no bind, connect, or send_to methods. To
create a UdpSocket bound to an address or to send a message to an address,
you must first obtain a Catalog permitting the address, and then call
Catalog::bind_udp_socket, or Catalog::connect_udp_socket, or
Catalog::send_to_udp_socket_addr.
Implementations
impl UdpSocket[src]
pub unsafe fn from_std(std: UdpSocket) -> Self[src]
Constructs a new instance of Self from the given std::net::UdpSocket.
Safety
std::net::UdpSocket is not sandboxed and may access any address that the host
process has access to.
pub fn recv_from(&self, buf: &mut [u8]) -> Result<(usize, SocketAddr)>[src]
Receives a single datagram message on the socket.
This corresponds to std::net::UdpSocket::recv_from.
pub fn peek_from(&self, buf: &mut [u8]) -> Result<(usize, SocketAddr)>[src]
Receives a single datagram message on the socket, without removing it from the queue.
This corresponds to std::net::UdpSocket::peek_from.
pub fn peer_addr(&self) -> Result<SocketAddr>[src]
Returns the socket address of the remote peer this socket was connected to.
This corresponds to std::net::UdpSocket::peer_addr.
pub fn local_addr(&self) -> Result<SocketAddr>[src]
Returns the socket address that this socket was created from.
This corresponds to std::net::UdpSocket::local_addr.
pub fn try_clone(&self) -> Result<Self>[src]
Creates a new independently owned handle to the underlying socket.
This corresponds to std::net::UdpSocket::try_clone.
pub fn set_read_timeout(&self, dur: Option<Duration>) -> Result<()>[src]
Sets the read timeout to the timeout specified.
This corresponds to std::net::UdpSocket::set_read_timeout.
pub fn set_write_timeout(&self, dur: Option<Duration>) -> Result<()>[src]
Sets the write timeout to the timeout specified.
This corresponds to std::net::UdpSocket::set_write_timeout.
pub fn read_timeout(&self) -> Result<Option<Duration>>[src]
Returns the read timeout of this socket.
This corresponds to std::net::UdpSocket::read_timeout.
pub fn write_timeout(&self) -> Result<Option<Duration>>[src]
Returns the write timeout of this socket.
This corresponds to std::net::UdpSocket::write_timeout.
pub fn set_broadcast(&self, broadcast: bool) -> Result<()>[src]
Sets the value of the SO_BROADCAST option for this socket.
This corresponds to std::net::UdpSocket::set_broadcast.
pub fn broadcast(&self) -> Result<bool>[src]
Gets the value of the SO_BROADCAST option for this socket.
This corresponds to std::net::UdpSocket::broadcast.
pub fn set_multicast_loop_v4(&self, multicast_loop_v4: bool) -> Result<()>[src]
Sets the value of the IP_MULTICAST_LOOP option for this socket.
This corresponds to std::net::UdpSocket::set_multicast_loop_v4.
pub fn multicast_loop_v4(&self) -> Result<bool>[src]
Gets the value of the IP_MULTICAST_LOOP option for this socket.
This corresponds to std::net::UdpSocket::multicast_loop_v4.
pub fn set_multicast_ttl_v4(&self, multicast_ttl_v4: u32) -> Result<()>[src]
Sets the value of the IP_MULTICAST_TTL option for this socket.
This corresponds to std::net::UdpSocket::set_multicast_ttl_v4.
pub fn multicast_ttl_v4(&self) -> Result<u32>[src]
Gets the value of the IP_MULTICAST_TTL option for this socket.
This corresponds to std::net::UdpSocket::multicast_ttl_v4.
pub fn set_multicast_loop_v6(&self, multicast_loop_v6: bool) -> Result<()>[src]
Sets the value of the IPV6_MULTICAST_LOOP option for this socket.
This corresponds to std::net::UdpSocket::set_multicast_loop_v6.
pub fn multicast_loop_v6(&self) -> Result<bool>[src]
Gets the value of the IPV6_MULTICAST_LOOP option for this socket.
This corresponds to std::net::UdpSocket::multicast_loop_v6.
pub fn set_ttl(&self, ttl: u32) -> Result<()>[src]
Sets the value for the IP_TTL option on this socket.
This corresponds to std::net::UdpSocket::set_ttl.
pub fn ttl(&self) -> Result<u32>[src]
Gets the value of the IP_TTL option for this socket.
This corresponds to std::net::UdpSocket::ttl.
pub fn join_multicast_v4(
&self,
multiaddr: &Ipv4Addr,
interface: &Ipv4Addr
) -> Result<()>[src]
&self,
multiaddr: &Ipv4Addr,
interface: &Ipv4Addr
) -> Result<()>
Executes an operation of the IP_ADD_MEMBERSHIP type.
This corresponds to std::net::UdpSocket::join_multicast_v4.
pub fn join_multicast_v6(
&self,
multiaddr: &Ipv6Addr,
interface: u32
) -> Result<()>[src]
&self,
multiaddr: &Ipv6Addr,
interface: u32
) -> Result<()>
Executes an operation of the IPV6_ADD_MEMBERSHIP type.
This corresponds to std::net::UdpSocket::join_multicast_v6.
pub fn leave_multicast_v4(
&self,
multiaddr: &Ipv4Addr,
interface: &Ipv4Addr
) -> Result<()>[src]
&self,
multiaddr: &Ipv4Addr,
interface: &Ipv4Addr
) -> Result<()>
Executes an operation of the IP_DROP_MEMBERSHIP type.
This corresponds to std::net::UdpSocket::leave_multicast_v4.
pub fn leave_multicast_v6(
&self,
multiaddr: &Ipv6Addr,
interface: u32
) -> Result<()>[src]
&self,
multiaddr: &Ipv6Addr,
interface: u32
) -> Result<()>
Executes an operation of the IPV6_DROP_MEMBERSHIP type.
This corresponds to std::net::UdpSocket::leave_multicast_v6.
pub fn take_error(&self) -> Result<Option<Error>>[src]
Gets the value of the SO_ERROR option on this socket.
This corresponds to std::net::UdpSocket::take_error.
pub fn send(&self, buf: &[u8]) -> Result<usize>[src]
Sends data on the socket to the remote address to which it is connected.
This corresponds to std::net::UdpSocket::send.
pub fn recv(&self, buf: &mut [u8]) -> Result<usize>[src]
Receives a single datagram message on the socket from the remote address to which it is connected.
This corresponds to std::net::UdpSocket::recv.
pub fn peek(&self, buf: &mut [u8]) -> Result<usize>[src]
Receives single datagram on the socket from the remote address to which it is connected, without removing the message from input queue.
This corresponds to std::net::UdpSocket::peek.
pub fn set_nonblocking(&self, nonblocking: bool) -> Result<()>[src]
Moves this UDP socket into or out of nonblocking mode.
This corresponds to std::net::UdpSocket::set_nonblocking.
Trait Implementations
impl AsRawFd for UdpSocket[src]
impl FromRawFd for UdpSocket[src]
unsafe fn from_raw_fd(fd: RawFd) -> Self[src]
impl IntoRawFd for UdpSocket[src]
fn into_raw_fd(self) -> RawFd[src]
impl OwnsRaw for UdpSocket[src]
Auto Trait Implementations
impl RefUnwindSafe for UdpSocket
impl Send for UdpSocket
impl Sync for UdpSocket
impl Unpin for UdpSocket
impl UnwindSafe for UdpSocket
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,
impl<T> AsUnsafeFile for T where
T: AsRawFd + OwnsRaw, [src]
T: AsRawFd + OwnsRaw,
pub fn as_unsafe_file(&self) -> UnsafeFile[src]
pub fn as_file_view(&self) -> View<'_, File>[src]
pub unsafe fn as_unscoped_file_view(&self) -> View<'static, File>[src]
pub fn eq_file<Filelike>(&self, other: &Filelike) -> bool where
Filelike: AsUnsafeFile, [src]
Filelike: AsUnsafeFile,
impl<T> AsUnsafeHandle for T where
T: AsRawFd + OwnsRaw, [src]
T: AsRawFd + OwnsRaw,
pub fn as_unsafe_handle(&self) -> UnsafeHandle[src]
pub fn eq_handle<Handlelike>(&self, other: &Handlelike) -> bool where
Handlelike: AsUnsafeHandle, [src]
Handlelike: AsUnsafeHandle,
impl<T> AsUnsafeSocket for T where
T: AsRawFd + OwnsRaw, [src]
T: AsRawFd + OwnsRaw,
pub fn as_unsafe_socket(&self) -> UnsafeSocket[src]
pub fn as_tcp_stream_view(&self) -> View<'_, TcpStream>[src]
pub unsafe fn as_unscoped_tcp_stream_view(&self) -> View<'static, TcpStream>[src]
pub fn as_tcp_listener_view(&self) -> View<'_, TcpListener>[src]
pub unsafe fn as_unscoped_tcp_listener_view(&self) -> View<'static, TcpListener>[src]
pub fn as_udp_socket_view(&self) -> View<'_, UdpSocket>[src]
pub unsafe fn as_unscoped_udp_socket_view(&self) -> View<'static, UdpSocket>[src]
pub fn as_unix_stream_view(&self) -> View<'_, UnixStream>[src]
pub unsafe fn as_unscoped_unix_stream_view(&self) -> View<'static, UnixStream>[src]
pub fn eq_socket<Socketlike>(&self, other: &Socketlike) -> bool where
Socketlike: AsUnsafeSocket, [src]
Socketlike: AsUnsafeSocket,
impl<T> Borrow<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T[src]
impl<T> From<T> for T[src]
impl<T> FromUnsafeFile for T where
T: FromRawFd + OwnsRaw, [src]
T: FromRawFd + OwnsRaw,
pub unsafe fn from_unsafe_file(unsafe_file: UnsafeFile) -> T[src]
pub fn from_filelike<Filelike>(filelike: Filelike) -> Self where
Filelike: IntoUnsafeFile, [src]
Filelike: IntoUnsafeFile,
impl<T> FromUnsafeSocket for T where
T: FromRawFd + OwnsRaw, [src]
T: FromRawFd + OwnsRaw,
pub unsafe fn from_unsafe_socket(unsafe_socket: UnsafeSocket) -> T[src]
pub fn from_socketlike<Socketlike>(socketlike: Socketlike) -> Self where
Socketlike: IntoUnsafeSocket, [src]
Socketlike: IntoUnsafeSocket,
impl<T, U> Into<U> for T where
U: From<T>, [src]
U: From<T>,
impl<T> IntoUnsafeFile for T where
T: IntoRawFd + OwnsRaw, [src]
T: IntoRawFd + OwnsRaw,
pub fn into_unsafe_file(self) -> UnsafeFile[src]
impl<T> IntoUnsafeHandle for T where
T: IntoRawFd + OwnsRaw, [src]
T: IntoRawFd + OwnsRaw,
pub fn into_unsafe_handle(self) -> UnsafeHandle[src]
impl<T> IntoUnsafeSocket for T where
T: IntoRawFd + OwnsRaw, [src]
T: IntoRawFd + OwnsRaw,
pub fn into_unsafe_socket(self) -> UnsafeSocket[src]
impl<T> SetTimes for T where
T: AsUnsafeFile,
T: AsUnsafeFile,
pub fn set_times(
&self,
atime: Option<SystemTimeSpec>,
mtime: Option<SystemTimeSpec>
) -> Result<(), Error>
&self,
atime: Option<SystemTimeSpec>,
mtime: Option<SystemTimeSpec>
) -> Result<(), Error>
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,